2018 Dodge Challenger R/t 392 on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge unveils Special Service Durango for government fleets

Straight off its refresh, the Dodge Durango is slipping back into its dress blues and getting back to work. The 2014 Dodge Durango Special Service Vehicle boasts all the refinements and improvements that the refreshed, civilian-spec model received, most notably a 15-percent improvement in fuel economy.
Designed for police and fire departments, and as Chrysler's answer to the Ford Police Interceptor Utility and Chevrolet Tahoe PPV in the growing service SUV market, the Durango boasts a 600-mile range, thanks to the addition of an eight-speed automatic, available on both the 3.6-liter Pentastar V6 and 5.7-liter Hemi V8. Equipped with the 360-horsepower Hemi, the Durango SSV can tow up to 7,400 pounds (the V6 is limited to 6,200 pounds).
Police and fire department Durangos get a few special features over the civilian models. The electric systems are ruggedized, with a heavy duty battery and a 220-amp alternator in place, while the engine's water pump and oil cooler are both stronger. The brakes are tougher, and a load-leveling suspension has been fitted, too.

1942 Dodge Carryall from WWII featured on 'Jay Leno's Garage'

On this episode of Jay Leno's Garage, Leno takes a look at a unique Dodge Carryall, both in its past and present states. The Carryall is a 1942 model restored and modified by Winslow Bent at Legacy Classic Trucks in Wyoming. According to Bent, the truck spent time in Tunisia during World War II. Obviously it's no longer a military vehicle, but Bent explains that he and his crew built the truck to still be extremely durable, since its new owner wanted a support vehicle for classic car rallies around the world and in remote locations. To reach this end, the Carryall's original inline-six has been replaced with an intercooled Cummins 4BT turbocharged diesel four-cylinder. Bent modified the engine to make less power than it could in order to make the engine understressed and longer lasting. In total, it makes only 130 horsepower, but 380 pound-feet of torque. It also features a boxed frame and heavy duty axles. It's plenty practical, too, with a large roof rack, winch, and even an on-board welding setup. But it's not all hardcore upgrades, since it also has air conditioning. Check out all the other cool details and listen to Leno and Bent geek out over leaf springs and intakes in the video above. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: YouTube / Jay Leno's Garage Aftermarket Dodge Truck SUV Off-Road Vehicles Special and Limited Editions Classics Videos Jay Lenos Garage dodge power wagon