2013 Dodge Challenger Srt8 392 Hemi ~ 6 Speed Stick on 2040-cars

Auto blog

8 things you learn while driving a cop car [w/videos]

Let me start off with the obvious: it is absolutely illegal to impersonate a police officer. And now that that's out of the way, I'd just like to say that driving a cop car is really, really cool. Here's the background to this story: Dodge unveiled its redesigned 2015 Charger Pursuit police cruiser, and kindly allowed Autoblog to test it. That meant fellow senior editor Seyth Miersma and I would spend a week with the cop car, and the goal here was to see just how different the behind-the-wheel experience is, from a civilian's point of view. After all, it's not technically a police car – it isn't affiliated with any city, it doesn't say "police" anywhere on it, and it's been fitted with buzzkill-worthy "NOT IN SERVICE" magnets (easily removed for photos, of course). But that meant nothing. As Seyth and I found out after our week of testing, most people can't tell the difference, and the Charger Pursuit commands all the same reactions as any normal cop car would on the road. Here are a few things we noticed during our time as wannabe cops. 1. You Drive In A Bubble On The Highway Forget for a moment that our cruiser was liveried with Dodge markings instead of those of the highway patrol. Ignore the large "NOT IN SERVICE" signs adhered around the car. Something in the lizard brain of just about every licensed driver tells them to hold back when they see any hint of a cop car, or just the silhouette of a light bar on a marked sedan. Hence, when driving on the highway, and especially when one already has some distance from cars forward and aft, a sort of bubble of fear starts to open up around you. Cars just ahead seem very reluctant to pass one another or change lanes much, while those behind wait to move up on you until there's a full herd movement to do so. The effect isn't perfect – which is probably ascribable to the aforementioned giveaways that I'm not really a cop – but it did occur on several occasions during commutes from the office. 2. You Drive In A Pack In The City My commute home from the Autoblog office normally takes anywhere from 25 to 30 minutes, and it's a straight shot down Woodward Avenue from Detroit's north suburbs into the city, where I live. Traffic usually moves at a steady pace, the Michigan-spec "five-over" speed.

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.