2011 Dodge Challenger Srt8 Coupe 2-door 6.4l on 2040-cars

Auto blog

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

Watch Atieva's electric van outrun a BMW i8 and Dodge Viper

A little while back, automotive startup Atieva drag raced its electric van, called Edna, against a Tesla Model S and a Ferrari California in order to compare its performance against known and revered mechanical athletes. Again, the Silicon Valley-based company is putting its prototype up against electrified and conventionally powered performance vehicles on the drag strip. Last time around, Edna, the Mercedes-Benz Vito van equipped with a 900-horsepower, all-wheel-drive powertrain, bested both of its foes. In that showcase, Edna was hitting 60 mph in a little over three seconds. Comparatively, BMW lists the i8's 0-60 time at 4.2 seconds, though Road & Track clocked it at 3.8 seconds, with a quarter-mile time of 12.3 seconds. The Viper does 0-60 in 3.4 seconds. Before you even watch the video above, you can imagine how it will end, as the retuned Atieva Edna rips 0-60 mph in 2.94 seconds. Atieva clocked the quarter mile at 11.3 seconds at 117 mph. It's worth noting that driver skill can have a lot to do with a car's straight-line performance. We've witnessed Viper's elapsing the quarter mile in well under 12 seconds, which means it should be quicker in this test than the i8, if not the Edna. Still, the performance showcased in the video is exceptional. To improve Edna's stats, Atieva says it has used testing data to fine tune its AC induction motors at higher speeds once it got low-speed performance locked in. After testing in the hot California sun, including the race you see above, Atieva drove Edna 90 miles home with range to spare. As for production plans, Atieva will put this powertrain into a sedan slated for sale in 2018. In the meantime, the company will keep testing and tuning its working prototype, and has even invited the public to put their cars up against Edna in future sessions. Related Video: Related Gallery 2015 BMW i8 in Petoskey, MI News Source: Atieva, YouTube: Atieva via Electrek Green Motorsports BMW Dodge Automakers Electric Future Vehicles Videos drag race atieva

Want a new 2017 Viper? You'd better call Gerry Wood Dodge

As unfortunate as the news may be, the Dodge Viper is entering its final year of production. Slow sales and increased safety regulations have finally killed Dodge's big, brutish, and beautiful supercar. It will be missed. According to Motor Authority, those looking to pick up one of the last remaining models will have to travel to Gerry Wood Dodge in Salisbury, North Carolina. The dealer has apparently managed to secure the final allocation of cars for itself. All 135 or so remaining cars will be sold exclusively through Gerry Wood Dodge. While Dodge has already sold out of the limited-edition 2017 models, Gerry Wood Dodge put a team together to research and create their own unofficial limited-edition cars. These will be ordered in specific and unique color and option combinations. Dodge offers more than 8,000 colors for the Viper, so picking out a few unused shades couldn't have been too difficult. While these aren't official, it should provide some bragging rights to owners who manage to secure one of the special cars. Despite the exclusivity and hoarding the final few vehicles, Gerry Wood Dodge doesn't plan to add a dealer markup to the car. They claim to never markup cars over MSRP, which seems good for everyone but them. We won't complain. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2016 Dodge Viper ACR: First Drive View 26 Photos News Source: Motor AuthorityImage Credit: Copyright 2016 Michael Austin / AOL Dodge Car Dealers Coupe Performance