1973 Dodge Challenger Rallye 4 Speed ***no Reserve*** on 2040-cars

Auto blog

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Watch this Dodge Viper get clawed to death

There's a scene in the James Bond movie, Casino Royale, where Daniel Craig's Agent 007 is captured by villain Le Chiffre, played by Mads Mikkelsen. Le Chiffre tortures Bond in a scene that is rather difficult to watch (especially for blokes) and impossible to describe on these digital pages (Google at your own risk). This video is the automotive equivalent of the Casino Royale torture scene.
It shows a Dodge Viper - a late, first-generation GTS judging by the center-exit exhausts - getting assaulted by a giant piece of heavy equipment. The large claw shows no mercy on the V10-powered sports car, rending its muscular curves into pieces and then running it over, just for good measure. It's a painful video to watch (and hear!), made worse because we don't know what the Viper did to deserve such a fate. About a third of the way through the video, the cameraman indicates that the man with the claw is a new operator from Chrysler, and it appears there may be some fire damage, but beyond that, we don't have much to go on.
Scroll down for the video but be warned, it isn't for the faint of heart.

2013-14 Dodge Viper recalled over faulty door handles

The 2013-14 Dodge Viper is getting a voluntary recall affecting 1,762 cars worldwide to replace their door-handle assemblies. Of the affected vehicles, FCA US reports there are 1,451 in the US, 160 in Canada, 17 in Mexico and 59 of them outside of NAFTA. After receiving three reports of doors either not closing or opening while driving a low speeds, FCA US engineers found a new sealant from a supplier didn't provide sufficient moisture protection to the electronic switches for the door latches. If the parts get wet, this can potentially cause a short circuit. The automaker is quite clear that are no reports of accidents of injuries from this problem. As always, the recall repairs will be done at no cost to owners, and FCA US will be getting in touch with customers soon about the problem. Related Video: Statement: Door-handle Assemblies April 9, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,762 cars globally to replace their door-handle assemblies. FCA US launched an investigation after the Company received three warranty claims linked to doors that failed to close or opened inadvertently while vehicles were moving at low speed. The Company is unaware of any related injuries or accidents. Engineers determined a sealant, newly adopted by a supplier, provided inconsistent moisture protection to the electronic switches that control the door latches. Switches exposed to moisture may short-circuit. Affected are approximately 1,451 model-year 2013-14 Dodge Viper SRT cars in the U.S.; 160 in Canada; 17 in Mexico and 59 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service, which will be performed at no cost. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.