2005 Chrysler Town&country Touring- Stown N Go on 2040-cars

Auto blog

Chrysler recalling nearly half a million Durangos and Grand Cherokees

Rule number one of public relations – save the bad news for Friday. Fiat Chrysler has adhered to that, announcing today that it'd be voluntarily recalling 467,480 SUVs. This latest recall could actually be thought of as a continuation of a September 2014 recall, relating to the fuel-cell relay. In that case, some 188,723 Dodge Durango and Jeep Grand Cherokee CUVs from model year 2011 were recalled. And this time, it's the Durango and GC in trouble again. FCA is adding crossovers from model years 2012 and 2013 to the fuel-pump recall, although only diesel-powered Jeeps with the 3.0-liter V6 that were sold outside of North America are affected this time around. As with the previous recall, deformities in the fuel-pump relay, which could affect its functioning. In most cases, FCA reports that the affected vehicles simply won't start, although they also could be prone to stalling. A new relay circuit will be installed that promises increase durability. Of the 467,480 vehicles being recalled, 338,216 were sold in the US market, 18,991 went to Canada and 10,829 were shipped south of the border, to Mexico. Outside of the NAFTA region, FCA is recalling 99,444 vehicles. No injuries or accidents have been associated with this recall. Statement: Fuel-Pump Relay February 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 467,480 SUVs worldwide to install new a relay circuit that improves fuel-pump relay durability. FCA US engineers have determined a condition identified in a previous investigation may extend to additional vehicles. The previous investigation, which led to a recall, traced a pattern of repairs to fuel-pump relays that are susceptible to deformation. This may affect fuel-pump function, preventing a vehicle from starting, or leading to engine stall. Of the two scenarios, the no-start condition is the more common. FCA US is unaware of any related injuries or accidents. The fuel-pump relay is located inside the Totally Integrated Power Module (TIPM), which also helps manage other vehicle functions. None of these other functions, including air-bag deployment, is affected by the fuel-pump relay. The new campaign affects an estimated 338,216 vehicles in the U.S.; 18,991 in Canada; 10,829 in Mexico and 99,444 outside the NAFTA region. Covered are model-year 2012 and 2013 Dodge Durango full-size SUVs and non-NAFTA 2011 Jeep Grand Cherokee mid-size SUVs equipped with 3.0-liter diesel engines.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.