2015 Navigation Sunroof 20s Aluminum Leather Heated Cooled V8 Ecotec on 2040-cars

Auto blog

This is what a 2017 Chevy Camaro Z28 could look like

The latest Camaro Z28, the enthusiast darling of the somewhat frumpy fifth-generation pony car, only hit the scene in 2014. It housed the wonderful 7.0-liter, naturally-aspirated LS7 small block V8 and featured a ton of aero bits. The trickest pieces may have been the dynamic spool valve shocks, legitimately race tech for the road. So with the new Camaro out in the wild, we were wondering what a new Z28 might look like, and thus, commissioned these renders based on our best guesses as to what a future Z28 might be. Since Chevy didn't stray too far from the Zeta-chassis Camaro formula with its new Alpha-based car, our vision of a new 2017 Camaro Z28 likewise is a sequel rather than a reboot. The exterior styling and aero details are similar, but sleeker. The defining and protruding front splitter is back, but it's smoothed slightly and better integrated. It shares quad exhaust pipes with the lowlier SS, but they're of the beveled Z06 variety, and sized up to a howitzer caliber. Instead of a weak faux rear fender vent, our version gains a real brake cooling duct. Some iconic elements, like the hood extractor vent and the large decklid spoiler, remain. What we can't see, we have to speculate on. As the track-focused, hardcore pony car in the Camaro lineup, the Z28 will have to do battle with the Ford Shelby Mustang GT350R. There's simply no avoiding it. And whereas Ford distinguished that car with a 5.2-liter, 526-horsepower, flat-plane-crank V8, Chevy is likely to look to the parts bin to find motivation. This isn't a knock; the LS and LT-series small block V8s are both numerous and power-dense. And there's one engine that seems to do the trick: the LSA, last seen in the old CTS-V and still on sale in the Camaro ZL1 (and of course, still being produced as a crate engine). In ZL1 form, the LSA makes about 580 hp, which is a nice margin over the GT350R. It's also a high-zoot but not top-of-the-line mill, having been mostly superseded by the 650-hp LT4. That puts our probable Z28 far enough behind the new CTS-V and current Corvette Z06 in the pecking order to be a safe bet, without hobbling it with the LT1 shared with the Camaro SS and regular Corvette. Will those trick spool-valve shocks from Multimatic make it to the Z28 again? Ford is taking the GT350R very seriously, and if the expensive but supremely capable suspension system is required to manhandle the Shelby at the track, you can bet that Chevy will pony up for it.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

GM says hybrid Corvette no laughing matter [w/poll]

When Mark Reuss was in LA recently, he sat down to have a few words with the scribes at the Los Angeles Times. When the issue of a hybrid Corvette came up, Reuss answered with "Don't laugh." The General Motors president is a complete fan of the possibility, calling it "attractive" and "really fun," believing it would improve GM expertise and that "people would love it."
Naturally, the president being supportive of an idea doesn't give indication that a hybrid Corvette is on the way. However, with supercars like the Porsche 918 Spyder and Ferrari LaFerrari giving hybrid tech a solid, if remote, place in the performance car world, the inexorable trickle-down of technology means we shouldn't be surprised if and when it does happen.
And now that we have that non-negative half-answer to a speculative question, it would be irresponsible for us not to commence rumormilling for the C8 Corvette. Taking Reuss at his word, the C8 will obviously be a hybrid with all-wheel-drive - the left side wheels driven with electric motors, the right side with the mid-mounted, four-cylinder diesel engine. With coefficient of drag of just .16, figure on a 0-to-60 mile-per-hour time of under 2 seconds and an all-electric range of something like 30 miles at top speed. Don't forget, folks, you read it here first.