1999 Chevrolet Tahoe Ls Sport Utility 2-door 5.7l on 2040-cars

Auto blog

Callaway, Lingenfelter boost Corvette Z06 way beyond 700 hp

With 650 horsepower and just as much torque on tap, few would accuse the latest Corvette Z06 of being down on power. But for those who'll always demand more, two leading Corvette tuners have just announced new tuning packages for the Z06 to boost Chevy's flagship well beyond 700 horsepower. The more powerful of the two comes from Callaway Cars, which has added a larger supercharger, a triple-action intercooler, and more to increase output to a massive 757 horsepower and 777 pound-feet of torque. The result, according to Callaway, is a 0-60 time quoted at 2.8 seconds and a quarter-mile run in 10.5. The package also includes a reshaped hood, all manner of trim upgrades, and a three-year warranty, and will set you back nearly $17k on top of the cost of donor vehicle that currently lists for $79,000. In what could only come second relative to Callaway's kit, Lingenfelter Performance Engineering has also released a Stage 1 package for the Z06. The kit includes a new dry sump damper, upgraded supercharger pulley and drive belt, and more – all of which Lingenfelter says will boost the Vette's output up to 720 hp and 730 lb-ft. Revised performance figures weren't released, but despite the 37-horse, 47 lb-ft deficit, we doubt it'd trail Callaway's by much. But both would likely leave the stock Z06 in their dust, and you can read more about them in the press releases below. Related Video: Callaway Cars Releases Their Most Powerful Corvette - 757 bhp / 777 lb-ft - Z06-based Corvette upgrade boasts 32% larger supercharger, triple intercoolers, and consistent power - lap after lap The Numbers - Callaway Cars today announced power numbers and performance for the flagship model in their performance car lineup. Equipped with Callaway's GenThree Supercharger, the Corvette Z06 now produces 757 bhp @ 6,200 rpm and 777 lb-ft @ 4,500 rpm (SAE). A launch to 60 mph is now achieved in 2.8 seconds, and a quarter-mile in 10.5 seconds at 131 mph. Why Go Big, When You Can Go Bigger? - Size Matters. To reach that power (which is up from 650 bhp / 650 lb-ft) the supercharger itself needed to be bigger since the output of a positive displacement supercharger is proportionate to its size. The Callaway GenThree supercharger is 32% larger in displacement (2300cc vs 1740cc). Cooling - Callaway engineers recognize that a key contributor to maximizing power is reduction of inlet air temperature associated with forced induction.

1956 Corvette SR-2 factory racer profiled

The Chevrolet Corvette has earned its place as America's sports car, capable of taking on the best the world can throw at it. Much of that winning reputation was earned with victories on the track. Now, there was a chance to own an early piece of the nameplate's motorsport history in the form of a 1956 Corvette SR-2 racer, but some deep pockets were necessary to get it, with an estimate of $6.885 million. The story behind the SR-2 is fascinating. In 1956, famous General Motors designer Harley Earl's son was racing in a Ferrari. Obviously, that wasn't going to work given his father's position within the automaker, and Harley and Corvette engineer Zora Arkus-Duntov got to work on a faster racecar. Three were made. This one was reportedly the first, and for 1957 it also received a fuel-injected V8 making a claimed 331 horsepower and four-speed manual gearbox, according to "Corvette Mike," the owner and seller. The SR-2 went on display in Scottsdale, AZ appropriately timed to coincide with the big Barrett-Jackson auction there that wrapped up this weekend. The car wasn't part of that event; instead marque specialist Mike Vietro sold the racer as a private treaty sale. Company spokesperson Troy Worrell told Autoblog both the bids and identities of the bidders will remain undisclosed. The video above goes into even deeper detail about this rare, finned Vette or check out the car's full description for even more info.

GM veteran Bryan Nesbitt tapped to head Buick design

General Motors styling veteran Bryan Nesbitt (pictured above) took over a new role on Monday as executive director of global Buick design and global architectures. Andrew Smith, who previously did that job and also coordinated the look for Cadillac, has remained in charge of the pen at Caddy with this shift. Nesbitt rose to prominence when he designed the Chrysler PT Cruiser, according to Automotive News. He joined GM in 2001 and has been there ever since in multiple high-level roles. In 2007, he was appointed vice president of design for North America and was later briefly general manager of Cadillac in 2009-2010. Nesbitt took over as the vice president of GM's international operations design in China in 2011. This shuffle also moves Ken Parkinson, currently styling boss for Chevrolet trucks, to China as design vice president there. In addition, John Cafaro becomes the person in charge of the look for Chevy globally, rather than previously splitting that role between cars and trucks with Parkinson. GM Global Design Leadership Changes – effective June 1, 2015. Bryan Nesbitt, Design Vice President, GM China will repatriate to North America and assume the position of Executive Director, Global Buick and Global Architectures. He will be located in Warren, MI. Bryan will be the design Champion for Buick in the US and China. Ken Parkinson, Executive Director, Global Chevrolet Trucks and Global Architecture will assume the position of Design Vice President, GM China. He will be based in Shanghai, China. Andrew Smith, Executive Director, Global Cadillac and Buick Design will assume the position of Executive Director, Global Cadillac. He will continue to be the design Champion for the Cadillac brand. In addition, he will continue to lead the Global Color & Trim team. He will be based in Warren, Michigan. John Cafaro, Executive Director, Global Chevrolet Cars will assume the position of Executive Director, Global Chevrolet. He will be the design Champion for Chevrolet. In addition, John will lead the exterior components and accessories team. He will continue to be based in Warren, MI. The roles and responsibilities of Helen Emsley, Mark Adams, Carlos Barba, Clay Dean, Michael Simcoe, and Teckla Rhoades remain the same. Related Video: The video meant to be presented here is no longer available. Sorry for the inconvenience.