1957 Chevrolet Suburban Napco 4x4 3800 on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Recharge Wrap-up: Chevy hits CO2 goal, eVgo and BMW build fast charging

Chevrolet has met its goal of preventing 8 million metric tons of CO2 emissions over the last five years. Through its community-based carbon reduction initiative, Chevy invested $40 million and took part in 38 different projects in 29 different states. The projects included supporting wind farms, powering a hospital with landfill gas, helping truckers reduce their idle time and helping create the ongoing #CleanEnergyU dialogue between students and clean energy leaders. In the end, Chevy retired all its carbon credits rather then spending them to offset its own emissions. Read more from Chevrolet. NRG eVgo and BMW are partnering to add DC Fast Combo charging to locations around the country. Over the next two years, the groups will bring hundreds of the 50-kW chargers to 25 cities, with 24 of those markets getting at least one installed by the end of 2015. "eVgo will add reliable DC Fast Combo capability to what is already America's largest DC Fast charging network," says eVgo President and CEO Arun Banskota. "This will be the fastest and most cost effective build out of a new network ever – thanks in large part to our existing infrastructure and committed retail host partners." Read more in the press release from eVgo. The EPA has settled with a Utah gasoline refiner over Clean Air Act violations. The HollyFrontier Corporation subsidiaries will pay $1.2 million for producing about 42 million gallons of gas that didn't adhere to Reid Vapor Pressure standards, resulting in 10 excess tons of volatile organic compound emissions. Its Salt Lake City refinery will also implement a program to offset past emissions. "This agreement will benefit public health by requiring retrofits of storage tanks at HollyFrontier facilities that will reduce volatile organic compound emissions and use next generation technology to verify these reductions," says Assistant Attorney General John Cruden. "This settlement shows that fuel refiners can and must meet the nation's standards for controlling the emissions that cause ground level ozone and serious health problems for Americans." Read more in the press release below. U.S. Settles with Gasoline Refiner to Reduce Emissions at Utah Facility WASHINGTON -- The U.S.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.