2011 Chevrolet Silverado 3500hd on 2040-cars

Auto blog

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Junkyard Gem: 1986 Chevrolet Sprint Plus

General Motors sold second- and third-generation Suzuki Cultuses with Geo or Chevrolet Metro badging in the United States from 1989 through 2001 model years, and we've all seen plenty of those cars on the street over the years. The first-generation Cultus was sold here as well, with Chevrolet Sprint badges, and I've found a rare example of the Sprint five-door hatchback in a Northern California car graveyard. The Chevy Sprint first appeared on the West Coast as a 1985 model, then became available everywhere in the United States for the 1986 through 1988 model years (in Canada, it was sold as the Pontiac Firefly). It was available here as a hatchback with three or five doors; for 1986 only, the five-door was badged as the Sprint Plus. Soon enough, The General would be selling many more Asian-built cars with Detroit badges here. Isuzu I-Marks were sold as Chevrolet/Geo Spectrums starting in the 1986 model year, while Daewoo provided the Pontiac LeMans two years later. Under the hood, a 1.0-liter three-cylinder rated at 48 horsepower. The five-door Sprint cost $5,580 in 1986, which was $200 more than the three-door (those prices would be $15,445 and $14,891 in 2023 dollars). I've documented seven discarded Sprints prior to this one (including an extremely rare Turbo Sprint), and all of them were three-doors; we can assume that price was the most important factor for Sprint buyers. Gasoline prices were crashing hard during the middle 1980s, but memories of gas lines and odd-even-day fuel rationing from 1979 remained strong. What cars competed with the '86 Sprint on sticker price? Well, there was no way to undercut the hilariously affordable (and terrible) Yugo GV, which cost $3,990. The much bigger (but still pretty bad) Hyundai Excel listed at $4,995, while Toyota would sell you a sturdy (but zero-fun) Tercel starting at $5,448. Even the wretched Chevy Chevette — yes, it was still available in 1986 — cost $5,645. The original buyer of this car was willing to shell out an extra $395 to get an automatic instead of the base five-speed manual. That's about $1,093 in today's money. This car must have been slow. By the end, the doors were held shut with duct tape, but it still stayed alive until age 37. 53 miles per gallon on the highway! It does everything. The camels of the highway.

Chevy reveals new IndyCar aero package

The IndyCar Series is not one that demands its participating teams and automakers to design their own chassis as they do in Formula One, but for this season, the organizers have opened it up to allow for custom aero packages. What you're looking at here is the new look of the chassis to be fielded by teams running under Chevy power. Based on the Dallara DW12 chassis – introduced three years ago and named after the late Dan Wheldon – Chevy's new package is designed for road courses and short ovals, with the speedway configuration to be revealed later. The kit features new wings front and rear and more sculpted side pods. It's also got new wedges at the back to envelop the otherwise open wheels that are a hallmark of Indy racing, a more streamlined engine cover and bigger rear bumper pods. The new package will debut at the Grand Prix of St. Petersburg that will kick off this year's championship in Florida on March 29, followed by the road-course grands prix in Louisiana, Long Beach, Alabama and Indianapolis before the new package needs to be ready for the Indy 500 late in May. Half of the teams on the starting grid this season will be running under Chevy power and are expected to use this new aero kit, with the remaining Honda teams slated to run a different package of their own. Chevrolet Debuts All-New 2015 IndyCar Aero Package Chevy-developed bodywork delivers improved aerodynamics 2015-02-17 INDIANAPOLIS – Chevrolet-powered racecars in the 2015 Verizon IndyCar Series will feature Chevrolet-developed aero packages. Chevrolet introduced the road course/short oval body design today at the Indianapolis Motor Speedway. It is distinguished from the previous racecar with new front wing elements, sculpted side pods and a new rear wing. A speedway configuration for the aero kit, designed for high-speed ovals, will be introduced ahead of its competitive debut at Indianapolis in May. "This is an important milestone in Chevrolet's involvement in IndyCar racing," said Jim Campbell, General Motors U.S. vice president of Performance Vehicles and Motorsports. "We focused on developing an aerodynamic package that delivers an balanced combination of downforce and drag, along with integrated engine performance. It's a total performance package." The new Chevy road course aero configuration delivers greater aerodynamic performance than the previous design.