No Reserve 2007 Chevrolet 2500 Lifted Duramax Diesel Crew 4x4 Lb Clean!!!!!!!!! on 2040-cars

Auto blog

Here are all the cars GM is axing as part of its restructuring

GM plans to kill off a couple of great and a few meh cars as part of its restructuring. Here's a rundown of all the cars being phased out of production. None of the vehicles GM axed were SUVs or crossovers. Instead, it was an action reminiscent of what Ford recently decided to do by discontinuing U.S. sales every Blue Oval sedan. GM just didn't explicitly say, "We're killing our cars," like Ford did — probably a smart move by GM. Keep scrolling down to see the full list of deceased GM models. Chevrolet Volt This one was the most surprising of all the cars GM decided to can, primarily because cars with plugs are supposed to be our future. However, maybe consumer demand just isn't quite there yet for a plug-in like the Volt. We came up with all sorts of ideas for what was to blame for the untimely demise of the Volt, so go check that out for a full breakdown of the situation. Cadillac CT6 Here's another car we'll be sad to see go. Cadillac's flagship sedan was such a joy to drive, and it served as the conduit to deliver GM's semi-autonomous Super Cruise system, which still hasn't been surpassed by any other company's technology in our books, even Tesla's Autopilot. That being said, GM does plan to produce the CT6 until March, with the last cars coming off the line set to be twin-turbo V8 V-Series models. If it's going to go, this seems like a pretty great way to make an exit. We'll be patiently awaiting the next flagship Cadillac once this one finally fades away. Chevrolet Impala The Impala is actually a pretty good car. It doesn't sell terribly, and we think it's a completely satisfactory car to drive. However, people would rather have a Traverse or Equinox these days, making the Impala one of the vehicles to find itself on this list. Chevrolet is keeping its smaller brother, the Malibu, but a big, full-size sedan just isn't what people are ordering up these days. It's unfortunate to see it go, but we won't be broken up over it. Chevrolet Cruze We wouldn't rank the Cruze at the top of the compact car class, but if you were looking for a small, cheap American car, it was either this or the Focus. The Cruze had the potential to be a true small performance car if Chevy had ever wanted to make it into one. But sadly, we're seeing it bow out before Chevy ever tried to slot a hot engine and suspension in there to make it competitive with other hot hatches. A Cruze SS would have made enthusiasts take notice.

Leaked GM document shows GMC Sierra I6 diesel is more powerful than F-150's

GM told us earlier this year that the 2019 GMC Sierra would be getting a 3.0-liter I6 diesel option, but it never mentioned power or fuel economy figures. Hold the phone though, because a leaked GM Canada document just showed up online that lists out the details we've been waiting for. Originally published by TFL Truck, the 3.0-liter oil-burner supposedly makes 282 horsepower and 450 pound-feet of torque. For those who are counting, that's more than the Ford F-150's 250 horsepower and 440 pound-feet from its 3.0-liter diesel. It soundly bests the 240 horsepower and 420 pound-feet of torque from Ram's 3.0-liter diesel as well. Fuel economy is another story, though. The promotional material states that it will get 28 mpg on the highway, which is 2 mpg short of the F-150's 30 mpg — mind you, it's only capable of that magical 30 mpg figure in rear-wheel drive form. There's another caveat here, too; these are numbers for Canada, so they're not exactly finalized EPA figures. However, we wouldn't expect drastic differences between the two when the American numbers come out. The leaked documents also state the diesel Sierra will be capable of towing 7,800 pounds. That number seems remarkably low when compared to the F-150, which can tow up to 11,400 pounds with its diesel. Extra power and torque would have us assume that GM could get even better numbers than Ford, so we're going to hold our final judgment for official word. A 10-speed automatic will do the shifting on the diesel, just like on the 6.2-liter V8. Since the Chevy Silverado is also expected to get this engine, we can assume the figures would be almost, if not identical, to those we see here. We recently drove the 2019 Sierra and Silverado without the diesel engines, so go check those reviews out if you'd like to know more of our thoughts on the redesigned GM trucks. Related video:

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.