Chevrolet SS Tribute, page #21

Auto blog

GM alerting truck and sedan owners to a do-over on brake recall

A recall campaign intended to address issues with braking systems on certain 2019 General Motors trucks and sedans may have introduced a new issue, the automaker has acknowledged, and thousands of owners driving repaired vehicles may need to return to their service departments for another update.  The update addresses a fix that was pushed out to owners of more than half a million brand-new GM trucks and sedans that could potentially lose partial braking function, according to the Detroit Free Press. The original software fix helped address situations where the vehicles' anti-lock braking systems would become disabled, which in turn would prevent electronic stability control from activating. Vehicles subject to the recall would often experience software glitches that prevented them from properly communicating the operational state of these systems, meaning drivers would have no idea that their brakes may not behave as expected in an emergency. The 2019 Chevrolet Silverado 1500, Cadillac CT6, and GMC Sierra 1500 were all recalled in the original campaign.  Unfortunately, the early version of this fix appears to have introduced yet another software glitch, indicating that the original fix did not do the trick. Those who have not yet had their cars serviced can rest easy; they will only receive the most up-to-date version of the software fix.  Related video    

The Chevrolet Bolt is headed to China as a Buick SUV

When spy photos of what appeared to be Chevrolet Bolt EV with some minor front- and rear-end updates circulated last week, Autoblog surmised that GM was working on some sort of Bolt-based vehicle — potentially a crossover — to be sold in China as a Buick. We may just have corroboration for that theory. On Thursday, Motor1.com spotted a story published earlier this week on the Chinese site Auto Home which claims that GM has applied to sell an all-electric SUV under the Velite 7 nameplate in China.  There's little differentiating the Velite 7's exterior from the Bolt EV's, apart from bumpers, badges, and a little extra ground clearance. Up front, the bowtie is replaced by a round Buick badge, and the bumper picks up an almost Prius-like appearance thanks to contrasting vertical elements and a thin grille bleeding into the head lights to give it a full-width appearance. Chevy Bolt-based prototype View 16 Photos If the Chinese report is accurate, there is one significant difference under the skin. Per the application, the Buick crossover variant is to be powered by a 174-horsepower electric powertrain. That's down 26 horsepower from the Bolt EV's powertrain, and we can't help but think that a lifted Buick variant might just need every pony it can get.  The needs of the Chinese market are unique, and we're certain GM knows what it's doing if these figures are accurate. We have no reason to believe Buick plans to sell the Velite 7 EV here in the States, though we expect an updated Chevy Bolt eventually, and we wouldn't be surprised if Buick brings something along shortly to fill the void left by the departure of the Regal sedan and its variants.  Related Video:

CES 2020 and Carlos Ghosn | Autoblog Podcast #609

Welcome to a new decade of the Autoblog Podcast. In this week's episode, Editor-in-Chief Greg Migliore is joined by Senior Editor Alex Kierstein and Senior Editor, Green, John Beltz Snyder. First they talk about their early impressions of CES 2020 in Las Vegas, in particular how interesting Sony's Vision-S Concept is. Then they talk about the intriguing saga and daring escape of former Nissan boss and global fugitive Carlos Ghosn. After that, they turn their attention to what they've been driving, including the Genesis G70, Chevy Blazer and Hyundai Santa Fe. Finally, they help a listener pick a new fun toy to replace an unloved Porsche Cayman in the "Spend My Money" segment. Autoblog Podcast #609 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown CES 2020 And that excellent Sony Vision-S Concept What's going on with Carlos Ghosn? Cars we're driving:2020 Genesis G70 2.0T Sport RWD 2020 Chevrolet Blazer Premier AWD 2020 Hyundai Santa Fe 2.0T AWD Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.

Chevrolet Silverado, GMC Sierra could get independent rear suspension

The Chevrolet Silverado and the GMC Sierra could reportedly receive a variant of the four-link independent rear suspension found under the new Tahoe and Suburban. While that's not a surprise, a recent report suggests electrification, not comfort, convinced General Motors to make the change. Replacing the time-tested solid rear axle with an independent suspension will improve comfort, handling and off-road prowess, while adding weight, and likely making the trucks a little bit more expensive. It's a fair trade-off, but GM Authority learned the real reason for the swap is that at least one of the pickups will spawn an electric model, and it's more difficult to package a bulky battery pack around a solid rear axle. The independent rear suspension takes up far less space, even if it has more moving parts. General Motors will build its first regular-production electric pickup on an evolution of the Silverado's T1 platform named BT1, according to the same source. The b stands for -- you guessed it -- batteries. The firm reportedly doesn't want to make two suspensions for cost reasons, so the independent setup will come standard regardless of whether the truck runs on gasoline, diesel, or electricity. As a bonus, Chevrolet and GMC could choose to offer their T1-based trucks with Magnetic Ride Control or an air suspension, options available on the 2021 Suburban and Tahoe. The independent rear suspension will also find its way to the next-generation GMC Yukon due to be revealed January 14, and to the 2021 Cadillac Escalade scheduled to make its debut February 4. The long-rumored, born-again Hummer will get it, too, because it will arrive as an electric model built on the BT1 platform. It's worth noting none of this is official, and General Motors has remained quiet about what's next for its new suspension design, and what will be under its electric truck's sheet metal. If the GM Authority report is accurate, the Silverado (pictured) and the Sierra could ditch their solid rear axle for the 2021 model year. The change will likely be accompanied by other tweaks inside and out. Featured Gallery 2019 Chevrolet Silverado 1500 View 16 Photos Chevrolet GMC Truck

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video:    

NHTSA upgrades probe into 1.7 million GM vehicles over wiper failures

WASHINGTON — The U.S. National Highway Traffic Safety Administration (NHTSA) said Tuesday it is upgrading an investigation into 1.7 million General Motors vehicles for windshield wiper failures. The auto safety agency opened the probe in November 2018 to see if GM needed to expand a 2016 recall of 2013 model year Chevrolet Equinox and GMC Terrain SUVs to cover additional vehicles. The engineering analysis probe covers 2010-2012 and 2014-2016 Equinox and Terrain vehicles. NHTSA could demand a recall after it completes the probe. NHTSA said it has reviewed 1,900 complaints and reports related to the issue in the 1.7 million vehicles. NHTSA said it has seen elevated failure rates in the 1.7 million vehicles, even though GM said the recalled vehicles have "double the warranty rate and five times the complaint rate." GM said it will "fully cooperate to support their investigation. We do not believe these windshield washer systems are defective." The wiper failures that prompted the 2016 recall were attributed to water and debris intrusion into the windshield wiper assembly ball joints, leading to excessive wear and eventual detachment of the ball joint. GM said it was installing an improved windshield wiper motor and transmission assembly and relocating a drain hole at the base of the windshield. Related Video:

Cadillac CT6 production ceases January 2020 as part of D-Ham layoffs

General Motors filed paperwork under the Worker Adjustment and Retraining Notification Act with Michigan's Department of Labor and Economic Opportunity this week, detailing events to come at the automaker's Detroit-Hamtramck Assembly Plant. Starting February 28, 814 salaried and hourly workers at D-Ham, as its called, will be laid off. The 753 workers represented by the UAW will begin receiving offers in January to relocate to facilities in Michigan and Ohio, or buyout offers. As the 4-million-square-foot plant winds down through April 3 to a skeleton crew, the Cadillac CT6 ceases production in January 2020, and the last Chevrolet Impala comes off the line on February 28. The loss of the CT6 represents the end of Cadillac's latest brief, and highly regarded, adventure into flagship sedans. It might also mean the end of the 4.2-liter Blackwing twin-turbo V8 engine, at least for the moment. Both casualties are calamities. The death of the Impala closes the door on a nameplate in production for 52 years since 1957, having started off as a top-tier trim for the 1958 Bel Air known as the Bel Air Impala, once advertised with the line, "Lets you know you're the boss." As part of the new four-year labor agreement with the UAW, GM is keeping D-Ham open to build a new line of battery-electric vehicles, ultimately investing $3 billion and tripling employment to 2,225 workers when fully operational. The agreement described the coming EV as a "van" that would commence production in late 2021, but various reports say what's actually coming is a range of premium EVs in pickup and SUV bodystyles under the program codename BT1. The easy predictions put an electric GMC Sierra and Cadillac Escalade among the EV fold, but not until 2023, according to auto industry forecaster LMC Automotive. Before that, LMC claims an electric van will debut in late 2021, along with a battery-powered rebirth of the Hummer brand in pickup and SUV forms, also in late 2021. 

2019 Los Angeles Auto Show | Autoblog Podcast #605

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder and Associate Editor Zac Palmer. This week, the main topic of discussion is the 2019 Los Angeles Auto Show. Of course, they've gotta talk about the Ford Mustang Mach-E — and its questionable naming scheme. They also run down some other L.A. show highlights including the Toyota RAV4 Prime, Kia Seltos, Lexus LC 500 Convertible and Audi RS Q8. Then they talk about the cars they've been driving: the 2020 Chevy Silverado with the Duramax diesel engine and the 2020 Subaru Legacy Touring XT. Autoblog Podcast #605 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown L.A. Auto Show 2021 Ford Mustang Mach-E (and here's a little more about the name) 2021 Toyota RAV4 Prime 2021 Kia Seltos 2021 Lexus LC 500 Convertible 2020 Audi RS Q8 2020 Chevy Silverado Duramax 2020 Subaru Legacy Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

GM isn't liable for punitive damages in ignition switch cases

NEW YORK — A federal appeals court said General Motors is not liable for punitive damages over accidents that occurred after its 2009 bankruptcy and involved vehicles it produced earlier, including vehicles with faulty ignition switches. The 2nd U.S. Circuit Court of Appeals in Manhattan said on Tuesday that the automaker did not agree to contractually assume liability for punitive damages as part of its federally-backed Chapter 11 reorganization. GM filed for bankruptcy in June 2009, and its best assets were transferred to a new Detroit-based company with the same name. The other assets and many liabilities stayed with "Old GM," which is also known as Motors Liquidation Co. Tuesday's 3-0 decision may help GM reduce its ultimate exposure in nationwide litigation over defective ignition switches in several Chevrolet, Pontiac and Saturn models. It is also a defeat for drivers involved in post-bankruptcy accidents, including those who collided with older GM vehicles driven by others, as well as their law firms. The ignition switch defect could cause engine stalls and keep airbags from deploying, and has been linked to 124 deaths. A lawyer for the drivers and their law firms did not immediately respond to requests for comment. GM had no comment. Circuit Judge Dennis Jacobs said GM's agreement to acquire assets "free and clear" of most liabilities excused it from punitive damages claims for Old GM's conduct. He also noted that the judge who oversaw the bankruptcy concluded that the new company could not be liable for claims that the "deeply insolvent" Old GM would never have paid. The decision upheld a May 2018 ruling by U.S. District Judge Jesse Furman in Manhattan, who oversees the ignition switch litigation. Drivers have sought a variety of damages in that litigation, including for declining resale values. GM has recalled more than 2.6 million vehicles since 2014 over ignition switch problems. It has also paid more than $2.6 billion in related penalties and settlements, including $900 million to settle a U.S. Department of Justice criminal case. The case is In re: Motors Liquidation Co, 2nd U.S. Circuit Court of Appeals, No. 18-1940. Government/Legal Chevrolet Pontiac Saturn Safety gm ignition switch