00 01 02 Chevy S-10 Regular Cab , Automatic, Bed Cover ,looks & Runs Great !!! on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Race Recap: 2013 Twelve Hours of Sebring, cakewalk up front, grindfest out back [w/spoilers]

This year's 12 Hours of Sebring wasn't exactly a foregone conclusion because we're still talking about racing, and anything can happen when the speeds are as high as the adrenaline and the desire. But we're still talking about Audi bringing it's two top-spec racers - and its huge budget and its nearly neurotic attention to detail - to a race that it uses as a test bed for The 24 Hours of Le Mans and as a way to open the endurance racing season with a victory.
Besides, 12 hours is a long time, especially at Sebring, and things didn't go all Audi's way. On top of that, although it was a pretty quiet race, behind the Audis things got even grimier, with plenty of battles, plenty of mechanical issues, and the new BMW Z4 GTE and Viper GTS-R being race tested. Oh, and that brand new chromed-out DeltaWing...

Chevy Corvette is latest car breached by hackers

UPDATE: This story has been updated with comment from General Motors. In the latest car-hacking exploit in a summer full of them, researchers from the University of California-San Diego say they've found a way to manipulate braking in a 2013 Chevrolet Corvette. The vulnerabilities may not be limited to that model. Cyber-security researchers breached the car's security systems via a device they had plugged into the Corvette's OBD-II port, and through that connection, they sent messages that could turn windshield wipers on and off and tamper with the brakes as the car drove at low speeds. It's the latest in a series of car hacks that involve access to critical systems obtained via the OBD-II port, where drivers can plug in devices that provide anything from diagnostic information for mechanics to driving information for insurance companies. Last November, cyber-security engineers from Argus Cyber Security remotely controlled vehicle functions in a car that had a OBD-II dongle called a Zubie installed. In January, researchers from Digital Bond Labs found security holes in an information-tracking dongle popular with more than 2 million Progressive Insurance customers. Those came before prominent hacks unveiled in recent weeks, in which researchers remotely commandeered control of a Jeep Cherokee and, separately, showcased problems with GM's OnStar infotainment system. Regarding the dongles that plug into the OBD-II ports, Stefan Savage, a Cal-San Diego professor involved in the research, tells WIRED that, "we acquired some of these things, reverse-engineered them, and along the way, found that they had a whole bunch of security deficiencies." Savage and others unveiled the latest study at the Usenix security conference Tuesday. In a video of their exploit entitled "Fast and Vulnerable," they show how they sent SMS messages from a smartphone to the dongle plugged into the car's OBD-II port. From there, their messages accessed the CAN bus, a network on the car that connects individual electronic control units, which control dozens of vehicle functions. As they send the commands to brake the car, the driver of the Corvette notes "the pedal doesn't react to any pressure." General Motors issued a written response Wednesday, warning drivers to be careful with third-party devices they plug into their OBD-II ports.