1962 Chevy C20 Pickup on 2040-cars

Auto blog

Rumor: 2016 Chevy Volt gets 53 miles EV range, 40% increase

While we're still waiting for the official word from GM, news is creeping around the Internet that the 2016 Chevy Volt will get a big boost in all-electric range and gas-burning efficiency. According to new rumors out today, the second-gen Volt will be able to go 53 miles on a full charge, have 106 MPGe and be able to get 42 miles per gallon on the official EPA numbers. Compared to the outgoing first-gen Volt (38 miles EV range, 98 MPGe, and 37 mpg) these are all impressive increases. The all-electric range boost of almost 40 percent is the biggest surprise, though. We knew the new Volt would get better numbers than the first-gen model, but when GM debuted the car in Detroit earlier this year, it said it suspected the Volt would get a 50-mile range, 41 mpg and 102 MPGe. We'll be keeping an eye out for official confirmation of all these new numbers. Volt drivers are already making most of their driving miles electric. The number sits at about 80 percent currently, and GM has said it expects this to climb to 90 percent in the new model. GM said in May that the 2016 Volt will start at $33,995, a bit lower than the current Volt's MSRP of $34,170 before any tax breaks. So, for less money you'll be getting much better fuel economy. What's not to like about that? Preorders are already open for interested buyers in some parts of the country. Related Video: Featured Gallery 2016 Chevy Volt View 16 Photos News Source: GM Authority, Autoguide Green Chevrolet Fuel Efficiency mpg ev range

GM recalling 1.4 million older vehicles for oil leak fire risk

General Motors is recalling 1,411,332 older vehicles with its 3.8-liter V6 yet again due to a fire risk. Specifically, there are 1,283,340 of them in the US, and the affected models are the: 1997-2004 Pontiac Grand Prix 2000-2004 Chevrolet Impala 1998-1999 Chevrolet Lumina 1998-2004 Chevrolet Monte Carlo 1998-1999 Oldsmobile Intrigue 1997- 2004 Buick Regal The fault with these vehicles is that oil can drip onto the hot exhaust manifold during hard braking, which can potentially cause of fire. In the last six years, there have 19 reported minor injuries from this problem but no crashes or fatalities, according to the company. Spokesperson Alan Adler also told Autoblog: "GM has reports of 1,345 fires in vehicles that were repaired under two previous recalls for this issue." At this time, GM is still developing a remedy for the problem. According to Adler, the company advised owners to park these vehicles outside for the previous recalls. "The cars can be safely driven. In cases where a customer reported an engine fire while driving, smoke was reported, which would be an indication of a malfunction," he said. This is GM's fourth recall for this problem since 2008, according to The Detroit News. At one point it was believed that aging valve cover gaskets allowed the oil to leak out and drip onto the manifold. A campaign in 2009 covered nearly 1.5 million of these models through the 2003 model year for the same issue. At the time, dealers installed new spark plug wire retainers as a fix. Related Video: GM Statement: General Motors is recalling 1,283,340 older sedans and coupes in the U.S. from the 1997 to 2004 model years because drops of oil may be deposited on the hot exhaust manifold through hard braking, which can cause engine compartment fires. GM is working on a remedy. The company is aware of post-repair fires in some vehicles but no crashes or fatalities. There have been 19 reported minor injuries over the last six years. These vehicles with 3.8-liter V6 3800 engines are affected: 1997-2004 Pontiac Grand Prix, 2000-2004 Chevrolet Impala, 1998-1999 Chevrolet Lumina and 1998-2004 Chevrolet Monte Carlo, 1998-1999 Oldsmobile Intrigue and 1997-2004 Buick Regal. Including Canada, Mexico and exports, the total population is 1,411,332.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.