Leather Interior Moonroof Automatic on 2040-cars

Auto blog

Why does the Corvette Stingray have so many vents? Here's why

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video:    

2024 Chevrolet Silverado EV output jumps to 754 hp and 785 lb-ft

A couple of days ago, GMC unleashed its 2024 Sierra EV Denali Edition 1 pickup, the luxury truck division's version of the 2024 Chevrolet Silverado EV. As has been the case between Chevy and GMC for decades, GMC designers worked to put ample visual difference between the two pickups that share the similar underpinnings. Unlike what's been the historical case, GMC announced output figures for the Sierra EV well above those for the Silverado. Preliminary estimates for the battery-electric Sierra with the dual-motor powertrain are 754 horsepower and 785 pound-feet of torque. Chevy revealed the 2024 Silverado EV in January with 664 hp and 785 lb-ft in RST trim. We're not sure what happened after the GMC debut, but the Bowtie has updated the Silverado's output to match the GMC with 754 hp and 785 lb-ft. Chevy truck communications spokesperson Sean Szymkowski submitted a statement to various outlets explaining, "As we prepare for production of the Silverado EV, our engineering team has further refined the estimated performance specs for the 2024 Chevrolet Silverado EV RST First Edition. GM now estimates horsepower to be up to 754 and torque up to an estimated 785 lb-ft when Wide Open Watts mode is engaged." It's possible Chevrolet did so in order to forestall backlash about the disparity, or it's possible the automaker already planned to do so after the GMC dropped. On the ICE side, buyers have got used to powertrain parity, the Silverado and Sierra offering the same engines with the same outputs even with pricing about $3,600 apart on the respective top trims. No matter how the decision was made, the benefits redound to Silverado EV buyers. By the way, the "Wide Open Watts" reference refers to the driving mode required to extract these peak power figures. In the GMC Sierra EV, this is called Max Power Mode. We're still looking for clarity on the output figures in everyday driving modes, we believe those will be the same 510 hp and 615 lb-ft that's the maximum in the lower trim Silverado EV Work Truck.    With a year to wait before the Silverado RST EV reaches reservation holders, and with the Chevrolet Work Truck providing real-world feedback before the RST arrives, don't be surprised at more tweaks made to both the Silverado and Sierra EVs before they hit the market. Related video: GMC reveals the all-electric 2024 Sierra EV