1971 Chevrolet Monte Carlo 46k Miles, 3 Owner , Triple Black , Restored, Nm on 2040-cars

Auto blog

Dale Earnhardt, Jr. puts his Callaway Corvette and '55 Chevy on eBay

Dale Earnhardt, Jr. has put a couple of his personal cars up for sale on eBay. The first is a 1955 Chevy Bel Air that Junior had reworked by Funkmaster Flex, a bit of a diversion from Flex's more common Ford efforts. Junior's ride has a replacement chassis from Jim Meyer Racing, a 434 small-block tuned by Sharioff Racing to 500 horsepower, and truly thin rubber on what appear to be aluminum billet rims with Junior's former number 8 on the center caps. The interior is all custom and painted to match the outside, and those seats have been completely reupholstered. The second car is a 1999 Callaway C12, the 18th of 19 C12s built that year and featured in a 2002 issue of AutoWeek. It joined Earnhardt's private collection in 2004. Built on the base of a C5 Chevrolet Corvette and using a lot of technical know-how from Callaway's European racing program, the BMW #287 Blue Pearl C12 had its V8 bored out to 6.2 liters and graced with Callaway's Supernatural upgrade; it also has a Callaway coil-over suspension with adjustable dampers. There's new bodywork all around, and when new it cost about $200,000. At the time of writing bidding on the Bel Air was up to $80,100, the C12 was at $63,100. The auction ends Monday morning, and the winning bidders have the option of having their prizes autographed and retrieving the keys from Dale Jr himself if they're willing to go to Moorseville, NC. Featured Gallery Dale Earnhardt Jr. '55 Chevy Bel-Air View 28 Photos Related Gallery Dale Earnhardt Jr. Callaway C12 View 24 Photos News Source: Dale Earnhardt Jr via eBay [1], [2] Aftermarket Celebrities Chevrolet Auctions Coupe Luxury Special and Limited Editions Performance Classics eBay callaway callaway corvette Chevy Bel Air

2016 Chevy Volt powertrain technical details

The last time General Motors launched a Chevy Volt, it was operating without really knowing how people would use the plug-in hybrid. Sure, it had experience with the EV1, but the Volt was a new kind of car, and you can see in the archives just how much time GM spent explaining this fresh, new powertrain to potential customers. Then, once the vehicle was released, the company collected voluntary data from a large number of owners to learn about their driving and charging habits. The company also asked them what they wanted most in the new version. There's got to be an algorithm buried somewhere in GM headquarters that was used to take all of the numbers GM collected and spat out the headline figures for the 2016 Volt: 50 miles of EV range and 41 miles per gallon. Another important number – price – is something GM isn't talking about yet (expect it in April or May), but the company is sharing some powertrain details about the upcoming car. At a preview lunch in Detroit last week for the SAE 2015 Hybrid & Electric Vehicles Technologies Symposium that's happening now in California, GM engineers Peter Savagian (who is presenting a paper on the new inverter used in the updated Volt) and Tim Grewe (talking about the entire second-generation powertrain) sat down with AutoblogGreen to tell us about the Volt's all-new propulsion system: The overall gist is that the new Voltec 5ET50 drive unit is lighter, smaller and more powerful thanks to a redesigned two-motor traction drive. As previously reported, the new engine is a 1.5-liter DOHC four-cylinder that offers 101-horsepower (at 5,600 RPM). Grewe said it's "great for range extension." The electric motor side of the powertrain offers 149 motoring horsepower from a two-motor, continuously variable transaxle. Initially, the new engine will be made in Mexico. GM will move production to Flint, MI during the first year it makes the 2016 Volt. The battery is slightly bigger in the new Volt – 18.4 kWh compared to 16.5 in the current-gen – and will have less range variation in the cold. GM is also using more of the overall capacity in the pack in the 2016 Volt than in previous versions, but is not saying how much more. GM is not ready to publish acceleration times just yet, but the 2016 Volt has improved numbers, especially when going from 30-60 miles per hour. Most everything on the new powertrain has become more efficient compared to the first-gen Volt.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.