Chevrolet Chevelle **fantastic Car** on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

2023 Grand National Roadster Show Mega Photo Gallery | Hot rod heaven

POMONA, Calif. — From an outsider's perspective, it would be easy to assume that the Grand National Roadster Show has always been a Southern California institution. After all, it celebrates the diverse postwar car culture of the region — hot rods, lead sleds, lowriders, and more. However, the show had its roots in NorCal in 1950 when Al Slonaker and his hot rod club showed their custom cars at the Oakland Expo. The GNRS moved to Pomona, California, in 2004. By then it had grown exponentially and seen about a dozen more car customization trends come and go. However, the show and its centerpiece award, the America's Most Beautiful Roadster prize, celebrate what is perhaps the first of those trends: the American hot rod in its purest form. Today, in its 73rd year, the GNRS is the oldest indoor car show in America. Annually it welcomes 500-800 cars, gathered into special themes like Tri-Five Chevys or Volkswagen Bugs. At this year's show, which was last weekend, a special hall was dedicated to pickup trucks built between 1948-98, including mini-trucks, groovy camper bed conversions, and resto-mods.  However, of all the vehicles presented, only nine are eligible for the America's Most Beautiful Roadster award. Winners get their names engraved on a 9-foot-tall perpetual trophy that was, according to The Ultimate Hot Rod Dictionary, the largest in the world when it debuted in 1950. Slonaker chose the word "roadster" initially because "hot rod" bore slightly negative outlaw connotations in 1950. Only American cars built before 1937 of certain body styles — roadsters, roadster pickups, phaetons, touring cars — are eligible, and they cannot have roll-down side windows.  Cars in the running for the cup cannot have been shown anywhere else before their debut at the GNRS.  Contestants for this accolade essentially build their cars to the a platonic ideal of a hot rod. This year the honors went to Jack Chisenhall of San Antonio, Texas, for his "Champ Deuce," a 1932 Ford Roadster. It's exactly what you picture when you think of a hot rod, but distilled to its absolute essence.  Other standouts included "Green Eyes," a two-tone green 1959 Chevy El Camino  with a heavily metal-flaked bed, "Blue Monday," a 1964 Buick Riviera lowrider, and a personal favorite, "Purple Reign," a purple and black 1951 Mercury. Cars may have started out as tools, but there aren't shows like this filled with custom refrigerators.