1966 White Ss - 396 Big Block - Factory A/c - Matching #s! on 2040-cars

Auto blog

Fernando Alonso fails to qualify as Pagenaud takes Indy pole

Former Formula One world champion Fernando Alonso narrowly failed to qualify for the Indianapolis 500 on Sunday as France's Simon Pagenaud took pole position for the May 26 race. Kyle Kaiser beat out Alonso for the final spot in the 33-car field when he finished third, one spot ahead of the Spaniard, in a six-car shootout that determined the Indy 500's last row. The 23-year-old Kaiser, the last driver to take the track, averaged 227.372 mph for his four laps, a mere 0.019 mph ahead of Alonso's 227.353 mph average in the McLaren-prepared Chevrolet. "We never surrendered. We kept trying," Alonso, 37, told reporters after a tough week at the famed speedway. The Spaniard crashed his Chevrolet in practice on Wednesday and missed nearly two full days of practice while a back-up car was prepared. Then he tried five times on Saturday to qualify, puncturing a tire on the first attempt. Alonso had a completely new set up for Sunday's shootout but could not get the speed he needed to qualify. "I think the car felt better today than what we had yesterday. (So I am) happy with things we tried," he told reporters before learning he had not qualified. Pagenaud had a four-lap average speed of 229.992 mph to become the first Frenchman to take the pole since Rene Thomas in 1919. "It's just amazing," Pagenaud, who last week won the IndyCar Grand Prix on the track's road course, told NBC Sports. "Obviously last week was amazing, but this is even more special." He will be joined by Ed Carpenter (229.889) and Spencer Pigot (229.826) on the front row. But the Cinderella story belonged to Kaiser, the 33rd qualifier. "I don't think I can wrap my mind around what we just did," he said after bumping Alonso from the field. "This is all the credit to the team. They've been working non-stop trying to get this car ready for us and they did everything that we needed to get into this field." (Reporting by Gene Cherry in Raleigh, North Carolina; Editing by Ken Ferris)Related Video: Motorsports Chevrolet McLaren Racing Vehicles F1 IndyCar

Millionth Corvette now being restored after sinkhole damage

Among the original American sports cars that were damaged by the sinkhole at the National Corvette Museum over a year ago was a 1992 convertible that was the millionth Vette made. And now that milestone vehicle is starting its restoration process. The landmark Corvette's rehabilitation is being carried out by the GM Design Center in Warren, MI, by a team of skilled craftsmen and technicians. The crew is more accustomed to building prototypes and concepts, but will face a new challenge in bringing this millionth Corvette back to its original condition. The white-over-red convertible was one of eight Corvettes that were swallowed up by the sinkhole at the museum in Bowling Green early in the morning on February 12, 2014. Five will be preserved in their compromised condition as part of a display demonstrating the effects of the sinkhole, while the remaining three were earmarked for restoration. The Design Center team has already completely the restoration of the 2009 Corvette ZR1 "Blue Devil" prototype, while the remaining 1962 Corvette will be restored by the museum. Related Video: Sinkhole-Swallowed 1 Millionth Corvette Restoration Underway Milestone damaged when earth opened beneath National Corvette Museum 2015-06-10 WARREN, Mich. – Craftspeople and technicians at the General Motors Design Center are painstakingly restoring the historic 1 millionth Chevrolet Corvette damaged nearly 16 months ago when a sinkhole opened beneath the National Corvette Museum in Bowling Green, Ky. The restoration crew is part of GM's Mechanical Assembly group at the Design Center, which typically spends its time building prototype and concept vehicles. The white 1992 Corvette is a challenge because rather than build an all-new vehicle from the ground up, the workers are trying to preserve the original appearance of a production vehicle. It is the second of three sinkhole-damaged Corvettes that Chevrolet has pledged to restore. The first, a 2009 Corvette ZR1 prototype known as the Blue Devil, was only lightly damaged and was returned to its original condition last fall. The National Corvette Museum will oversee the restoration of the third car, a 1962 Corvette. Five other Corvettes swallowed by the sinkhole will remain in their as-recovered state to preserve the historical significance of the cars. They will become part of a future sinkhole-themed display at the museum. Sinkhole summary On Wednesday, Feb.

GM recalls Colorado, Canyon, and Malibu for airbag problem

The Basics: General Motors will recall and issue a stop sale on 1,740 total examples of the 2016 Chevrolet Colorado, Malibu, and GMC Canyon. This includes 1,579 units in the US and 161 in Canada. The Problem: The second stage of the driver front airbag inflator might not be present. If this happens, the airbag won't fill as quickly as it should in a high-speed crash, which could increase the risk of injury, according to Reuters. This is not related in any way to Takata's inflator problems, and these parts come from a different supplier. Injuries/Deaths: None reported. The Fix: GM will replace the vehicles' airbag assemblies. If You Own One: GM spokesperson Tom Wilkinson told Autoblog he wasn't specifically sure when recall repairs would begin but said it would be "shortly." He expects the fixes to happen "quickly" because of the small number of affected vehicles, and many of them are either in transport or already in dealer stock. More Information: GM recalled the 2015 Canyon and Colorado in 2014 for a completely separate airbag issue. In that case, a manufacturing error improperly wired the connectors. Related Video: GM Statement GM is recalling 1,579 MY 2016 Chevrolet Colorado, GMC Canyon and Chevrolet Malibu vehicles in the United States and 161 in Canada to replace driver-side front airbags. The second stage of the airbag may not deploy properly in certain high-speed crashes. During a routine quality inspection, it was determined that a component required for a second-stage/high-output deployment was not loaded during the inflator build. Dealers will replace the driver-side front airbag assembly. There have been no reports of crashes or injuries related to this issue. This issue is unrelated to the ongoing Takata recalls.