Conversion Van,express Van,custom Van on 2040-cars

Auto blog

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

Chevy rolls out Corvette Z06 C7.R Edition at SEMA

It's not just concept vehicles that Chevy is showcasing at SEMA this year. The Bowtie brand is also taking the occasion of the tuner expo to reveal the new Corvette Z06 C7.R Edition. The special edition of the flagship performance model pays tribute to the racing model with a series of special touches and upgrades. The C7.R edition is based on the Z06 in 3LZ trim, and comes equipped with the Z07 Performance Package, including Brembo carbon-ceramic brakes and Michelin Pilot Sport Cup 2 tires. But that's not the end of the story. It also includes special graphics, yellow brake calipers, yellow-striped black wheels, a carbon ground effects package, carbon hood section, metallic gray grilles and vents, and a black leather interior with sueded microfiber trim, Competition Sports seats, and yellow stitching. Buyers will be able to order theirs in black or yellow and in either coupe or convertible body-styles. Only 650 examples will be made, of which 500 will remain in the United States, and each of them is individually numbered starting with the VIN 700001. Of course, being based on the Z06 we already know, it packs a 6.2-liter supercharged V8 engine good for 650 horsepower and an equal measure of torque. With the Z06 pack, that translates to a 0-60 time of under 3 seconds for the automatic version and 3.2 for the manual. Related Video: Corvette Z06 C7.R Edition Pays Tribute to Racing Legacy Distinctive appearance package complements capability with special-edition style LAS VEGAS – When the Z06 rejoined the Corvette lineup in 2015 as the most capable model in the car's long, storied history, it also joined an elite fraternity of the world's most capable supercars – with performance proven on the track, including winning Car and Driver's 2015 Lightning Lap evaluation. The Corvette Z06's capability is derived in no small part from technology and experience leveraged from the championship Corvette Racing program. That connection is celebrated with the 2016 C7.R Edition. It's offered in Corvette Racing's signature yellow livery – or black – with coordinated exterior and interior accents. Only 650 will be built (500 for the U.S. market), all with the Z07 Performance Package with carbon ceramic brakes, and a specially serialized vehicle identification number.

GM reportedly developing 2.5-liter turbo four-cylinder

General Motors is allocating a massive amount of resources to developing electric technology, but it's not forgetting about the gasoline-powered cars that make up the bulk of its sales. It's reportedly designing a new 2.5-liter turbocharged four-cylinder engine based on its 2.7. Citing "sources familiar with the matter," enthusiast website GM Authority wrote that the 2.5-liter four is "in [the] final stages of development," meaning it should be announced sooner rather than later (assuming the report is accurate). Technical details are few and far between as of writing. The publication learned that the 2.5 will be part of the Cylinder Set Strategy (CSS) family of engines and that it will be mechanically related to the 2.7-liter currently found in the Chevrolet Silverado 1500, among several other models. It will feature dual overhead camshafts. It's too early to tell which models the 2.5-liter four-cylinder will end up in, or how much power it will generate. The output will likely depend on the application. For context, the 2.7 delivers 310 horsepower at 5,600 rpm and 348 pound-feet of torque between 1,500 and 4,000 rpm in the Silverado. In the smaller Colorado, it provides anywhere between 237 and 310 horsepower depending on the trim level selected. While this is pure speculation, our crystal ball tells us the engine will end up powering crossovers. It's an easy deduction to make. We can't imagine it will be offered in the Silverado, and seeing it in the Colorado is unlikely because its entry-level engine develops 237 horsepower; there's likely not much of a market for a midsize truck with 200 or so horsepower. Putting it in the Corvette wouldn't make sense and the Camaro has nearly reached the end of its life cycle without a successor planned. This leaves us with Chevrolet's range of crossovers, like the Equinox, as well as their GMC-, Buick-, and Cadillac-branded counterparts. We're not discounting the possibility that the cars set to receive the 2.5 haven't been unveiled, but those are likely crossovers, too; the odds of seeing another big Chevy sedan are very, very low. General Motors hasn't commented on the report, and it hasn't publicly announced plans to expand its CSS family of engines. If the report is accurate, we should learn more about the new turbocharged, 2.5-liter four-cylinder engine in the not-too-distant future. Featured Gallery 2022 Chevrolet Equinox RS View 56 Photos Buick Chevrolet GM GMC