1968 Restored With 355ci Small Block on 2040-cars

Auto blog

Chevy says not to look at the 2019 Silverado's fuel economy rating

The 2019 Chevy Silverado is hitting dealerships soon, and one of the most notable changes for the new full-size pickup is the addition of a 2.7-liter turbocharged inline-four. The engine replaces the naturally-aspirated 4.3-liter V6 in volume consumer models like the Silverado LT and promises more power, less weight and — most importantly — better fuel economy. The thing is, the gains in efficiency haven't been as dramatic as some might have hoped, especially when stacked up against competitors from Ford and Ram. As Automotive News reports, GM's response is a little murky. First, let's talk numbers. We're pulling all figures from FuelEconomy.gov, the official U.S. government source for fuel ratings. Fuel economy numbers on trucks vary greatly based on a number of factors. Bed and cab configuration play a part, but so does a four-wheel-drive system. You also have to factor in tires, transmissions, rear-axle gearing, hybrid systems and cylinder deactivation. Things like that can make the difference between best- and worst-in-class. The EPA's website doesn't give enough information a lot of the time, so there's really no easy way to compare apples-to-apples. First, take a look at the ratings for the 2019 Silverado. A 2.7-liter model with two-wheel drive is rated 20 city, 23 highway and 21 combined. That's both better and worse than a two-wheel drive 2018 Silverado with the 4.3-liter V6 (18 city, 24 highway and 20 combined). The updated 2019 Silverado with a 4.3-liter V6 has yet to be rated. With less weight and a smaller engine, many hoped Chevy would make bigger gains. It's unusual to see any decrease in a fuel economy metric these days. GM says that it's not done tuning the new 2.7-liter engine, so fuel economy could theoretically increase. Expanding further, a V8-powered 2019 Silverado (17 city, 24 highway and 19 combined) actually gets better highway fuel economy than a turbocharged four-cylinder powered truck in certain configurations, even if the latter has a better overall average. But that's only with two-wheel drive, the 8-speed transmission and cylinder deactivation. A Silverado with the 5.3-liter V8 and a 6-speed automatic is rated at 15 city, 22 highway and 17 combined. The biggest issue with the Silverado 2.7-liter doesn't come from within GM itself but from Ford and Ram. GM cites the Ford F-150 with the 3.3-liter V6 and the Ram 1500 with the 3.6-liter V6 as the closest competitors to its new 2.7-liter inline-four.

Sunday Drive: Performance comes in many shapes and sizes

The Chevrolet Corvette has always stood out as a bastion of reasonably priced performance, and the latest 'Vette has that in spades. And while its expected starting price of around $120,000 certainly isn't cheap, it's an undeniable deal in the supercar world – remember, this thing'll do 210 miles per hour thanks to its 755-horsepower supercharged V8 engine. And did you get a load of that massive rear wing? Team Corvette's longtime foe, the Porsche 911, is similarly hellbent on ultimate performance. And as a reminder of how long the Corvette/911 rivalry has been melting tires we present the 1990 Porsche 911 as reimagined by Singer you see below. It's beautiful, it's green, and it's packing 500 air-cooled horsepower. You don't have to burn gasoline to go fast, as proven by the second-generation Tesla Roadster, which was revealed as a surprise late last week. Elon Musk says it'll be the quickest car in the world with a 0-60 time of just 1.9 seconds. And while you may not think of a semi truck when you think speed, the Tesla Semi can do 0-60 in 5 seconds flat unloaded, or in 20 seconds with a load of 80,000 pounds. Compared to today's crop of diesel semis, that's amazing. Continuing the truck theme, we present an artists rendering of what the next-generation Ram 1500 pickup may look like. Spoiler alert: Ram's mini-semi look is giving way to something much more modern. There may even be a first-of-its-kind split tailgate at the rear. And if you don't think the Ram 1500 has anything to do with performance, we should remind you that it's one of the cheapest ways to get a tire-shredding Hemi V8 engine in America. 2019 Chevy Corvette ZR1: All hail the 755-horsepower C7 king This is the first Porsche 911 to get Singer and Williams' 500-horsepower engine Tesla Roadster surprise reveal | 'Quickest car in the world' Tesla Semi Truck revealed: Here are the key details This could be the next-generation 2019 Ram 1500 2019 Ram 1500 spotted with split tailgate

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.