2012 Chevrolet Corvette on 2040-cars

Auto blog

NHTSA ends GM steering investigation without seeking a recall

DETROIT — U.S. safety regulators have closed an investigation into sticky power steering on thousands of older General Motors SUVs and will not seek a recall. The National Highway Traffic Safety Administration says GM in 2014 issued “special coverage” to fix the problem on the Chevrolet Equinox, GMC Terrain and other models. The coverage replaced a steering gear with an improved one. The agency said a recall isn't needed because of the coverage and low complaint and warranty repair rates. The agency opened the probe in June of 2020 into steering problems affecting an estimated 781,000 of the SUVs from the 2010 through 2012 model years. Increased friction could make it feel like the steering wheel is stuck. But GM said the SUVs could still be turned, although with more effort than usual. “In view of the special coverage, low rate of failure and low potential hazard to drivers, this preliminary evaluation is closed,” the agency wrote in documents posted Wednesday on its website. Government/Legal Recalls Chevrolet GMC Safety

Chevy's Android Auto update will reach cars in March

Buying a new Chevy with the hopes of using Android Auto during your daily commute? You'll have to sit tight for a while before that dream becomes reality. The carmaker announced that an Android Auto software update will only reach its 2016 model-year vehicles next March, starting with those that have 8-inch MyLink touchscreen systems. That's going to be a long half-year wait if you're eager to get Google Maps directions through the center stack. The good news? Chevy is promising that all vehicles with 7- and 8-inch MyLink displays (ranging from the Spark to the Corvette) will eventually have Android Auto, so you won't have to drive one of the brand's swankier machines to get a smartphone-powered infotainment deck. This article by Jon Fingas originally ran on Engadget, the definitive guide to this connected life. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging