2005 Chevrolet Corvette Z51 on 2040-cars
Roanoke, Virginia, United States
MILEAGE:19,783
****CLEAN TITLE*****
Clean and Garaged kept
2005 Z51 corvette
DIFFERENCE IN THE Z51
Larger/stiffer anti-sway bars
Stiffer springs
Bilstein shocks with tuned specific valving
Z06 rear spoiler
Transmission cooler
Functional front and rear brake ducts for added brake system cooling
Unique light weight forged aluminum 18-inch front and 19-inch rear wheels; painted finish standard and chromed finish optional
Z06 brakes, including cross-drilled 355 mm (14.0 in) front rotors and 340 mm (13 in) rear rotors
************ALSO***********
NAVIGATION
H.U.D.
POWER CONVERTABLE TOP
RUN FLAT GOODYEAR TIRES
************ADDED: ALL NEW OEM PARTS Z06 FRONT FENDERS, REAR QUATERPANELS, FRONT BUMPER, Z51 BADGES, SMOKED TAILLIGHTS, ZR1 SPOILER, Z06 WHEELS AND TIRES(WIDER)
Chevrolet Corvette for Sale
- 2008 chevrolet corvette(US $7,000.00)
- 2005 chevrolet corvette(US $10,000.00)
- 2010 chevrolet corvette zo6(US $10,000.00)
- 2008 chevrolet corvette(US $7,000.00)
- 2001 chevrolet corvette convertible(US $7,000.00)
- 2006 - chevrolet corvette(US $9,000.00)
Auto Services in Virginia
Wiygul Automotive Clinic ★★★★★
Valle Auto Service ★★★★★
Trusted Auto Care ★★★★★
Stanton`s Towing ★★★★★
Southside Collision ★★★★★
Silas Suds Mobile Detailing ★★★★★
Auto blog
This is your 2014 Chevrolet SS
Sat, 16 Feb 2013Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.
GM warning 800,000 owners that their cars may need oil changes more frequently than they say
Fri, 05 Apr 2013The days of changing your engine oil every 3,000 miles are long gone thanks to most cars having automatic oil monitoring systems, but about 800,000 General Motors vehicles apparently have incorrect monitoring software that is leading to premature engine component wear. According to Autoweek, certain 2010-2012 Buick LaCrosse, Regal, Chevrolet Equinox and GMC Terrain models equipped with 2.4-liter four-cylinder engines could be going too long in between oil changes resulting in a higher-than-normal number of warranty claims for the engine's balance chain. The balance chain links the balance shaft to the crankshaft, and a worn one can produce higher noise levels.
As a fix, GM dealers will be reprogramming the software for the monitors in an effort to reduce the interval between oil changes, which varies based on driving habits and conditions. Through February 2015, the software update will be done at no cost to vehicle owners, but since this is not a recall, after that point, it will be up to the discretion of dealers as to whether or not they will charge for the service. What isn't immediately clear is whether GM plans on giving assistance to out-of-warranty customers who are experiencing engine issues from the worn chain.
UAW to vote on strike at Kentucky Corvette plant
Tue, 08 Apr 2014The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."