2005 Chevrolet Corvette Base on 2040-cars

Auto blog

New GM subcompact SUV spied, could be a Chevy or GMC

GM's pair of subcompact crossovers have been trundling along for a while now. The Buick Encore was the first for Americans in the 2013 model year, and the Chevy Trax that was based on the Encore (an encore of the Encore, if you will) arrived for the 2015 model year. Each has undergone a mild update, but these spy photos could indicate their replacements are in the works. Or not. For starters, we can't be sure which GM brand this new SUV is destined for. Though the timing and its flowing lines could indicate Buick, the thick horizontal bars visible in the grille would indicate otherwise. The next Encore being at least related to this is at least a possibility. Making the case for GMC are those thick grille bars, the fact that it extends far below the lights, and may even rise above them, similar to the Acadia. And that rising beltline isn't that different from that of the Acadia. Arguing against the GMC idea is the Encore, which is almost always sold in GMC-Buick combo dealers. Much as the Acadia was made smaller to eliminate confusion and in-house competition with the Enclave, it's hard to see GM opting to resurrect such an issue at the bottom end of the SUV market. That means we're leaning toward this little SUV wearing a Chevy bowtie. The split grille with a large lower section and small upper section is the brand's current design language, as seen on the new Malibus and Cruzes. The shape is vaguely Equinox-like. And like Buick, Chevy also has a subcompact crossover ready for replacement: the Trax. Now, our photographer reports he's seen another subcompact testing that has Blazer design cues, but in this crossover-hungry market, we wouldn't be surprised if two similarly sized but differently styled Chevy crossovers make the grade. It's a strategy that's working pretty well for Jeep. We'll no doubt be seeing more of these disguised test vehicles milling about the country in the coming months, so perhaps we'll eventually get a better idea of what this is before more official information starts trickling out within one or two years. Related Video: Featured Gallery GM Subcompact Crossover spy shots View 10 Photos Image Credit: SpiedBilde Spy Photos Buick Chevrolet GM GMC Crossover SUV buick encore chevy trax

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

GM to build next-gen Chevy Cruze in Mexico

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.