2012 Chevy Colorado Ext Cab Adrian Steel Ladder Rack Are Camper Work Bed 33k on 2040-cars

Auto blog

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

2016 Chevrolet Camaro: Notes from the reveal

The 2016 Chevrolet Camaro debuted Saturday evening in Detroit at an enthusiast-oriented event near the city's IndyCar course. While the big news was the Camaro's 200-pound weight loss, tighter chassis, and a snorting new V8, plenty of other morsels of Camaro info came out. Here's some of the more interesting stuff we heard. • The 2.0-liter inline four-cylinder is the first turbocharged engine in a Camaro. • The LT1 borrowed from the Corvette Stingray marks the third time a Camaro has used an engine with that badge. It was previously used in 1970-72 (Z/28), 1993-97 (Z/28), and 1996-97 (SS). • The Camaro was revealed in a tent before nearly 1,000 enthusiasts, General Motors executives (including CEO Mary Barra) and mere feet from the Grand Prix course where IndyCars will run in two weeks. • Chevy hopes to continue to attract new customers with the Camaro and said 63 percent of the fifth-generation buyers were new to the brand. • GM product boss Mark Reuss neatly summed up the Camaro's handling character. "It's wicked fast and extremely nimble." • Reuss on the design goal: make it "look like a car for tomorrow instead of a car from yesterday." • Reuss' first car was a 1967 Camaro, and he's reiterated his passion for the car. "People want to be seen in a Camaro, and that never goes away." • Chevy North America president Alan Batey said he plans to line up a red Camaro as soon as the order bank opens. We assume he'll have early access to that. • Though the appearance is similar, the sixth generation of the Camaro appears a little sleeker and is more aerodynamic thanks to 350 hours in the wind tunnel. Only two parts, the SS badge and the rear bow-tie emblem, are carryover. • Al Oppenheiser, the Camaro's chief engineer, said most of the options (except Magnetic Ride Control, which is SS exclusive), will be offered on the inline four. The engine will be capable of propelling the Camaro to a sprint to 60 miles per hour in well under six seconds. "We don't want to ... make it feel like an excuse car," he said. • Without revealing specifics, Oppenheiser said every Camaro variant will be faster than the model it replaces. •The interior is vastly improved. We got an up-close look in the cabin of one of the cars revealed with a red and white layout, and the materials are much better. The setting is more colorful, and 24 different ambient lighting shades are available. Related Video:

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.