2006 Chevrolet Colorado Wt on 2040-cars

Auto blog

General Motors and EVs: No stranger to firsts, but where's the leadership?

2015 is already shaping up to be the year of "affordable, 200-mile EV" concepts. Nissan and Tesla have each been talking about them for some time, the latter promising to unveil its Model 3 at the North American International Auto Show in January before balking when the time came. Instead, Chevrolet beat them all by unveiling the Bolt concept at the same event, followed shortly thereafter with suggestions of a 2016 launch – potentially offering the first nationwide EV with anything close to that range. It was the ballsiest EV-related move General Motors has made in a quarter century. But will it remain so? Exactly 25 years before the Bolt rolled up onto the turntable, then-Chairman Roger Smith unveiled GM's last ground-up EV concept, the even-more-unfortunately-named Impact, at the Los Angeles Auto Show in January 1990. A few months later, he surprised most of his colleagues by announcing its intended production in honor of Earth Day. It was the first modern foray into electric vehicles for the US by any automaker, one that was rewarded by the State of California with what is now known as the Zero Emissions Vehicle mandate. The program not only forced other automakers into competing with Roger's pet project, but inspired all of them to fight it like small children against bedtime. Some years later, the drivers themselves weighed in, with a biting documentary about that obstinance and the leadership it cost both GM and the country. Within months, GM was first back into the fray of plug-in vehicles. Many criticized the company for starting with a PHEV rather than jump straight back into EVs. The choice wasn't totally out of the blue – even EV1 was meant to be followed by a PHEV. And especially on the heels of Who Killed the Electric Car?, some skittishness was understandable: even a successful EV would invite a "we told you so" public reaction, underscoring their mistake in ending the EV1 program. If a new EV didn't do well, they'd be convicted in the public eye as serial killers. All while seeking a federal bailout. For all the flak, the resulting Chevy Volt was and is a better car than GM has ever gotten credit for. But the company seemed to grow weary of having to overcome its varied past, and while the current owners remain happy, much of the stakeholder and community engagement that so effectively built early goodwill and sales growth faded not long after launch. Marketing has been spotty in both consistency and effectiveness.

GM to build next-gen Chevy Cruze in Mexico

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado