2005 Chevrolet Colorado Z71 Ls Crew Cab Pickup 4-door 3.5l on 2040-cars

Auto blog

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

2020 Chevy Silverado HD vs. 2019 Ram, Ford heavy duty trucks: How they compare on paper

Last year was all about the latest in light-duty full-size pickup trucks, so this year, Ram, Ford and Chevy are launching the heavy-duty variants. The first out of the gate is the redesigned 2019 Ram 2500 and 3500 HD, and Ram dropped all the pertinent specs with the reveal. Chevy followed with the new Silverado HD in Chicago, and Ford revealed updates to the Super Duty at the same show. Ford hasn't released details on output, payload capacity, towing capacity or pricing for the updated Super Duty. As such, we'll be comparing the current Super Duty with the all-new Silverado HD and Ram HD. Both Chevy and Ram have revealed full specs for each of their respective trucks, leaving out only pricing, which we've estimated based on the outgoing models. You can see the raw details in the chart below, followed by extra information and analysis. Some things to keep in mind: These specifications cover all versions of the Ram HD, Silverado HD and Super Duty, such as 2500 and 3500 models, and all the way up to F-450. Specifications can vary widely based on engine, drivetrain, cab and bed configurations, so be sure to take a close look at the specific model you're interested in when you get particularly serious about buying. And of course, be sure to check out our car comparison tool if you'd like to look at other trucks on the market. Engines and drivetrains All three of these trucks offer gasoline and diesel engines, but only the Ram has two versions of the diesel. Starting with gas engines, Ram's 6.4-liter V8 has the power advantage with 25 more horsepower than the next-most-potent Super Duty, but the new Silverado HD's 6.6-liter V8 takes the torque crown at 464 pound-feet, nearly 35 more than the other two gas engines. The Ram is also the only one to pair an eight-speed automatic with the gas engine, whereas the Ford and Chevy make do with a six-speed. With diesel engines, horsepower is a weak point for the Ram. The Ram's entry-level turbo 6.7-liter inline-six is the weakest, as the only one with under 900 pound-feet of torque and under 400 horsepower. Even the high-output version only makes 400 horsepower, while the Chevy makes 445 and the Ford 450. But the tables turn with torque, as the Ram makes a best-in-class 1,000 pound-feet followed by the Ford's 935 and the Chevy's 910. Both the Ram and the current Super Duty diesels each get a six-speed automatic, but the new Silverado HD's diesel gets a 10-speed unit.

GM diesel pickups first to undergo extra EPA, CARB testing

The effects of Volkswagen's long-running diesel emissions evasion are starting to spill over to other automakers, but General Motors is taking things in stride. The 2.8-liter, four-cylinder Duramax in the 2016 Chevrolet Colorado and GMC Canyon is the first engine to get extra scrutiny by the Environmental Protection Agency and the California Air Resources Board, Automotive News reports. Rather than just the usual in-lab test, it's also being checked on the road. However, the extra evaluation shouldn't have any impact on when the trucks with his mill hit dealers later this fall. "We're in our final stages of the EPA certification, and our launch is on track," Chevy spokesperson Otie McKinley tells Autoblog. The four-cylinder diesel in the trucks makes 181 horsepower and 369 pound-feet of torque, and the automaker is touting low NOx production. In the announcement for the Colorado's specs, the company calls it "the cleanest diesel truck engine ever produced by General Motors." The tech includes exhaust gas recirculation to lower combustion temperatures and improve emissions. There's also a urea tank like on the bigger diesels for full-size trucks, and it gets refilled in time with oil changes. An indication on the instrument panel lets drivers know when that's needed, too. Even with the more demanding testing, the company doesn't seem too worried about the four-cylinder passing. "Part of our development process is on-road and off-road [laboratory] testing," Scott Yackley, Chevy Trucks assistant chief engineer, said to Automotive News. In the wake of the VW scandal, the EPA has pledged more rigorous testing. Before, on-road emissions evaluations were largely limited to heavy-duty vehicles, but the agency has decided to apply the checks more often to other models. There's also now greater cooperation with Canadian authorities.