Find or Sell Used Cars, Trucks, and SUVs in USA

1970 Chevelle Convertible - Ls6 Tribute on 2040-cars

Year:1970 Mileage:2950 Color: grey /
 Black
Location:

Newport Beach, California, United States

Newport Beach, California, United States
Advertising:
Transmission:Manual
Engine:454
Vehicle Title:Clear
VIN: 00000000000000000 Year: 1970
Mileage: 2,950
Make: Chevrolet
Exterior Color: grey
Model: Chevelle
Interior Color: Black
Trim: Convertible
Drive Type: rwd
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

 

1970 Chevelle Convertible - LS6 Tribute

Where do I start?  This car a project for me.  I spent a lot of time gathering the correct parts (NOS) which are all date and numbers correct. This is about as close to a real LS6 Convertible as one can get without spending over $200k.  This is a true color code 17 (shadow grey) car.  I purchased the car from someone in Arizona, but it was from California before that.  I had it profesionally restored from JH Resorations is Riverside, California. Frame off restoration.  . 

 - Interior was completely restored.  Dash was completely restored with correct gauges, correct radio, etc.  New top was installed also. 

 - Body was sanded, prepped and painted professionally.

 - I chose to have the frame was powder coated for durability. All new wiring, brake lines, fuel lines, etc.

 - Motor.  Correct LS6 specs.  "512" block w/ 4 bolt mains.  Rebuilt by Orange Engine here in Orange County, Ca. using correct parts bored .30 over.

 

I will try to list the parts and numbers the best I can.

 

LS6 Drum to Drum CRW Posi rear end. Axle code reads: CRW 041b, dates C50 and #3969278NF

1970 restored alternator - #1000837, 37 amp dated 0D17

restored LS6 gauge Pod w/ 6500 rpm tach

new 1970 SS gauge/dash bezel

New Hi performance LS6 Solid Lifters

New Hi Performance LS6 pushrod set

Original radiator cover plate

NOS LS6 fuel pump

NOS LS6 fuel pump to carb lines

NOS Throttle cable

CRV 512 LS6 Engine block

Matching 291 heads

Original LS6 437 distributor

NOS LS6 oil pan

restored LS6 811 water pump

NEW LS6 Cam shaft

Restored - List 4557 Holly Carburator (correct for a four speed)

Correct Deep Groove pulleys - numbers correct

Fan blade - 772

fan shroud - NOS

NOS Radiator hoses

All correct hose clamps

New correct hoses for water pump and heater

AO Wheels, matching set all restored,  wide oval tires

M22 Rockcrusher 4 speed.  NOS linkage,

Correct bell housing,

This list goes on and on.  If you have any question about a part not listed, message me or give me a call

I have more pictures upon request.

 

 


On Mar-26-13 at 00:17:42 PDT, seller added the following information:

 

 

Rex

714-287-3656

Auto Services in California

Woody`s Auto Body and Paint ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 9020 Gardendale St, Santa-Fe-Springs
Phone: (562) 633-3813

Westside Auto Repair ★★★★★

Auto Repair & Service, Auto Oil & Lube, Brake Repair
Address: 115 McPherson St, Davenport
Phone: (831) 600-7074

West Coast Auto Body ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 15144 Valley Blvd, Cerritos
Phone: (626) 961-2779

Webb`s Auto & Truck ★★★★★

Auto Repair & Service
Address: 2146 S Atlantic Blvd, Bell-Gardens
Phone: (323) 268-1266

VRC Auto Repair ★★★★★

Auto Repair & Service
Address: 2409 Main St, Moreno-Valley
Phone: (951) 276-3280

Visions Automotive Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Glass-Automobile, Plate, Window, Etc-Manufacturers
Address: 8698 Elk Grove Blvd #1-238, Walnut-Grove
Phone: (877) 312-0678

Auto blog

Weekly Recap: Lamborghini to build SUV

Sat, May 30 2015

Finally, Lamborghini will build a sport utility vehicle. The Italian supercar maker confirmed this week that it will launch a luxury SUV in 2018. It will be built at Lamborghini's soon-to-expand factory in Sant'Agata Bolognese in Italy, and will double the company's current sales volume. Lamborghini did not announce a name for the vehicle or other details, but noted a concept version, the Urus, was displayed at the Beijing motor show in 2012. It will be sold around the world, but it's expected to be a critical offering in the United States, China, and the Middle East. The automaker projects the SUV will sell about 3,000 units per year, and it will be the third product in Lamborghini's portfolio. It currently sells the Huracan and Aventador supercars. "The introduction of a third model line endorses the stable and sustainable growth of the company and signifies for us the beginning of a new era," Lamborghini chief executive Stephan Winkelmann said in a statement. The project is also a boon for Italy, which will get 500 new jobs in the Emilia Romagna region as Lamborghini's factory will nearly double in size. Ian Fletcher, principal analyst for IHS Automotive, said the SUV will position Lamborghini for future growth. "It could well also bring new customers to the brand [who] may find the dramatic styling of Lamborghini products appealing, but find its typical sports cars restrictive," he said. "If it is a success, the SUV could be a catalyst to Lamborghini broadening its portfolio further." OTHER NEWS & NOTES GM invests in Chevy Camaro factory General Motors is investing $175 million to upgrade its factory in Lansing, MI, to build the 2016 Chevy Camaro. The investment will pay for new tooling and equipment. The improvements include three new paint systems and two new robotic framers. GM will add a second shift at the factory to build the Camaro, resulting in 500 jobs. The automaker had dropped the plant to one shift last year amid slow sales for its products, the Cadillac ATS and CTS. GM is spending $5.4 billion over the next three years to upgrade its US facilities. Last week, GM announced plans to spend $439 million to build a new paint shop for the Chevy Corvette. While the Camaro and Corvette plant improvements are intriguing to enthusiasts, GM also confirmed this week that it is investing $1.2 billion in its Fort Wayne (IN) factory that builds trucks.

GM to cut production at 5 plants in North America, kill several models

Mon, Nov 26 2018

DETROIT/WASHINGTON — General Motors Co said on Monday it will cut production of slow-selling models and slash its North American workforce in the face of a stagnant market for traditional gas-powered sedans, shifting more investment to electric and autonomous vehicles. The announcement is the biggest restructuring in North America for the U.S. No. 1 carmaker since its bankruptcy a decade ago. GM said it will take pre-tax charges of $3 billion to $3.8 billion to pay for the cutbacks, but expects the actions to improve annual free cash flow by $6 billion by the end of 2020. GM plans to halt production next year at three assembly plants: Lordstown, Ohio, Hamtramck, Michigan, and Oshawa, Ontario. The company also plans to stop building several models now assembled at those plants, including the Chevrolet Cruze, the Cadillac CT6 and the Buick LaCrosse, the sources said. Sources said the Chevrolet Volt, Impala and Cadillac XTS would also be discontinued. Signs of the demise of six passenger-car models have been swirling since July. Plants in Baltimore, Maryland, and Warren, Michigan, that assemble powertrain components have no products assigned to them after 2019 and thus are at risk of closure, the company said. It will also close two factories outside North America, but did not identify those plants. The AP reported that 14,700 jobs would be affected. Some 8,100 of those would be white-collar jobs reduced through buyouts or layoffs. The No. 1 U.S. automaker signaled the latest belt-tightening in late October when it offered buyouts to 50,000 salaried employees in North America. The company also said it will cut executive ranks by 25 per cent to "streamline decision making." Some 6,000 factory workers could lose their jobs or be transferred to other plants. Its shares were last up 6.2 percent at $38.16. Tariff 'headwinds' and cost-cutting GM Chief Executive Officer Mary Barra told reporters on Monday the company can reduce annual capital spending by $1.5 billion and increase investment in electric and autonomous vehicles and connected vehicle technology because it has largely completed investing in new generations of trucks and sport utility vehicles. Some 75 percent of its global sales will come from just five vehicle architectures by early in the 2020s. It plans to reduce annual capital spending to $7 billion by 2020 from an average of $8.5 billion a year during the 2017-2019 period.

GM plans to restart production in Mexico on May 20

Mon, May 18 2020

MEXICO CITY — General Motors is tentatively planning to restart operations at its auto assembly plant in the Mexican city of Silao on May 20, according to a message to workers seen by Reuters on Sunday, as the car industry prepares to exit the coronavirus lockdown. Separately, the president of GM's Mexican unit advised suppliers to prepare to resume operations. “We are now beginning a new phase given the Mexican governmentÂ’s official announcement earlier this week to consider the transportation manufacturing industry as essential for the countryÂ’s economy,” Francisco Garza, president ofGeneral Motors de Mexico, wrote in an email to suppliers dated on Friday that was viewed by Reuters. The reopening of the plant  in Silao would be a positive signal for the auto sector in North America, whose supply lines are highly interconnected between the United States, Mexico and Canada. The plant in the central state of Guanajuato has been idled for weeks due to the coronavirus outbreak. Workers had previously been told to plan to return to their jobs on May 18. A GM spokeswoman said the company could not confirm when it would restart operations at any of its facilities in Mexico because it is awaiting more guidance from the government. The message to the plant's workers came after the government on Friday clarified when the industry could begin easing restrictions imposed because of the health emergency. On Wednesday, the government said automakers could start going back into production from May 18. It then withdrew that advice and suggested the new start date would be June 1. Finally it indicated the sector, which forms the backbone of Mexican manufacturing, could begin operating as soon as next week if companies had the required safety measures in place. U.S. officials and its auto industry have pressed Mexico's government to get its factories open again because American operations depend heavily on parts from south of the border. However, some politicians are wary of opening too fast. Mexico registered its first case of coronavirus weeks after the United States and Canada and the toll of daily infections and deaths in the country reached new peaks over the past few days. The Silao production facility, which makes highly profitable pickup trucks for GM, is one of the biggest automotive plants in Guanajuato, a major Mexican carmaking state. Related Video: