1968 Chevrolet Chevelle Malibu All Original 73,925 Miles No Rust Anywhere Look on 2040-cars
Lone Pine, California, United States
|
1968 CHEVELLE MALIBU BY CHEVROLET 307 2SP AUTOMATIC 73,925 ORIGINAL MILES LEFT MILLER CHEVROLET 1968 AND HAS LIVED ALL ITS LIFE IN INYO COUNTY CALIFORNIA, EVERY PEICE OF THIS CAR IS ORIGINAL AS IT CAME FROM DEALER NO RUST ANYWHERE NEVER SMOKED IN WILL DRIVE TO MOON AND BACK WAS OWNED BY 93 YEAR OLD MY FRIENDS MOM WHO PASTED AWAY I WAS FORTUNATE TO GET THE CAR I HAVE TOO MUCH RIGHT NOW OTHERWISE I WOULD BE ON IT !! THIS CAR IS A RESTORES DREAM DONT HAVE TO BUY NOT ONE PART ALL CHROME ALL INTERIOR ALL MOTOR ALL DRIVETRAIN ORIGINAL EVEN THE KEY IS THE ONE FROM DEALER ASH TRAY NEVER HAD CIGARETTE IN IT CAR SMELLS LIKE THEY DID IN 1968 THIS CAR IS A DIAMOND WAITING TO BE POLISHED NEED MORE PICTURES CONTACT ME OR CALL 760 876 1070 LEAVE MESSAGE THANKS FOR LOOKING IF YOU ARE THE LUCKY ONE TO BUY THIS CAR I CAN TELL YOU NOW YOU WILL BE MORE THAN HAPPY!
|
Chevrolet Chevelle for Sale
1970 chevrolet chevelle ss 454/4 speed-frame off restored-big block-mint(US $37,995.00)
1971 chevy chevelle/malibu ss 454 12 bolt rear end (updated info)
1972 chevy chevelle malibu 1968 1967 1969 1970 1971
1970 chevelle, matching numbers, hugger orange, white, stripes and interior
Custom airbrush flames and motor paint, weiand blower, 2 4bbl, one of a kind!(US $52,995.00)
1968 chevrolet chevelle ss 502(US $99,000.00)
Auto Services in California
Windshield Repair Pro ★★★★★
Willow Springs Co. ★★★★★
Williams Glass ★★★★★
Wild Rose Motors Ltd. ★★★★★
Wheatland Smog & Repair ★★★★★
West Valley Smog ★★★★★
Auto blog
Next-gen Chevy Silverado and GMC Sierra may use carbon fiber
Thu, Dec 7 2017It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck
2016 Chevy Camaro performance figures released
Mon, Sep 14 2015If you want to make a car faster, there are two sure-fire ways to get the job done – add power and/or reduce weight. Chevy has done both for the 2016 Camaro, putting as much as 455 horsepower into its muscle coupe and shaving a few hundred pounds from every trim. That range-topping power comes courtesy of a 6.2-liter V8 engine, and it's enough grunt to push an automatic-equipped Camaro SS to 60 miles per hour in just 4.0 seconds flat (4.3 seconds with a manual) and down the quarter mile in 12.3 seconds at 116 mph (12.5 at 115 for the stick). Not coincidentally, those acceleration specs, at least on paper, put the V8-powered Camaro SS just above the Mustang GT on the muscle-car pecking order. When the road gets twisty, Chevy claims the Camaro SS can generate as much as .97 g on the skidpad. And, thanks in part to its Goodyear Eagle F1 summer tires, the SS can stop from 60 in as little as 117 feet. We look forward to finding out how nimble the new Camaro feels when compared to its primary competitors. <p>Your browser does not support iframes.</p> Moving down one notch to the 335-hp 3.6-liter V6, properly equipped 2016 Camaro coupes can hit 60 in as few as 5.1 seconds and cover the quarter in 13.5 at 103. Perhaps even more intriguingly, the 2.0-liter turbocharged four-cylinder and its 275 horsepower (the only configuration quicker with a manual transmission, incidentally) can propel the Camaro to 60 in 5.4 seconds and through the 'ol 1320 in 14 seconds flat. That's seriously quick, but buyers comparing the Camaro to the Mustang will find that the EcoBoost 2.3-liter is a bit more powerful (310 hp and 320 lb-ft) and quicker (5.1 seconds to 60). Chevy is making lots of noise about the efforts its engineers went through to shed weight from the 2016 Camaro, going so far as to shave down suspension bolts so that no thread went unthreaded. The weight-saving obsession pays off – base Camaro models are down 390 pounds while the SS model drops 223 pounds over the 2015. The 2016 Camaro SS boasts a power-to-weight ratio of 8.1 lbs per pony, a 14-percent improvement over the last-gen. Even though weight is down, chassis stiffness is said to be up by 28 percent over the fifth-gen Camaro coupe. Also of note: The Camaro is now lighter than the Mustang across the board when comparing like-to-like configuration levels. The 2016 Chevy Camaro starts at $26,695 (including $995 for destination).
Lutz dishes dirt on GM in latest Autoline Detroit
Mon, 20 Jun 2011Bob Lutz sits down for Autoline Detroit - Click above to watch video after the jump
Autoline Detroit recently played host to Bob Lutz, and, as is always the case, the former General Motors vice chairman dished out some great commentary. Lutz was promoting his new book Car Guys vs. Bean Counters: The Battle for the Soul of American Business, and talk quickly turned to his role as it related to product development and high-level decision making at GM. While on the topic of brand management, Lutz revealed a few rather interesting tidbits about his former employer:
All Chevrolet vehicles were required to have five-spoke aluminum wheels and a chrome band up front, as part of the Bowtie brand's overall image.



