$$$ "bodymans Special" $$$ 1989 Chevrolet Cavalier on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Chevy, Kid Rock in Confederate flag row with civil rights group

Two of Detroit's own are ensnared in controversy today. In an interview with Fox News' Megyn Kelly, mulleted musician Kid Rock told those protesting the Confederate Battle Flag to "kiss my ass." Now, Chevrolet, which is sponsoring Rock's summer concert tour, is under fire for its support. "We are committed to our sponsorship of Kid Rock's summer tour and are confident that he will provide his fans, many of whom are proud Chevrolet owners, with a spectacular concert experience that celebrates American Freedom," a Chevy spokesperson told The Detroit Free Press last week. The company also uses the Kid Rock anthem Born Free in its pickup truck advertising. The company's position is not sitting well with the Detroit chapter of the National Action Network, though, which has called on GM to pull its support for the embattled artist. "It's obvious to us that, by supporting [Rock], while he's making inflammatory statements, General Motors becomes an accomplice if they allow him their support to stand behind his statements," the Rev. Charles Williams II, NAN's Detroit chapter director, told the Freep. As controversial as Rock's comments are, it's not entirely clear when the last time he actually waved that flag was. The Freep reports that several concertgoers don't recall seeing the flag during his most recent tour, or even over the last few years of concerts. In a 2002 interview with the paper, Rock, real name Robert Ritchie, said that the flag had been used as a symbol of southern rock and a rebel spirit, saying: "It's not about hatred or being a racist. I like Southern rock music, and a lot of people died under that flag for beliefs they had, right or wrong. But it stands for rebel, and my love of Southern rock." Related Video: