2014 Chevrolet Captiva Sport Ltz on 2040-cars

Auto blog

More 2017 Chevy Bolt powertrain details revealed

We've seen the production version of the Chevy Bolt electric vehicle. We've driven a prototype version. And now it's time to get some details about the powertrain. After the production version's reveal at CES last week, GM trotted out the Bolt EV for its Detroit debut this morning. The company brought with it a bunch of technical specifications. We'll start with the most important part of an EV: the battery. GM has put a 60-kWh lithium-ion battery that weighs just just 960 pounds into the floor of the Bolt. As previously announced, the Bolt's 288 cells will be able to go over 200 miles on a full charge. That full charge takes nine hours on a Level 2 EVSE thanks to the onboard 7.2-kW charger. Of course, a full charge won't be that important most days, which is why GM says that you can get 50 miles of range in "less than two hours" on Level 2. There's a SAE Combo DC fast charging option as well. The battery will have an eight-year/100,000-mile warranty. The Bolt will be able to sprint up to 60 miles per hour in "less than seven seconds" thanks to a 150-kW/200 horsepower motor in the Bolt. The motor is a new GM design that can produce up to 266 pound-feet of torque. The Bolt uses a shift-by-wire system and an, "offset gear and shaft configuration tailored to meet efficiency and performance targets." The Bolt EV's powertrain has a 7.05:1 final drive ratio. You can read all of the details direct from GM below. Related Video: Drive Unit and Battery at the Heart of Chevrolet Bolt EV Engineers focus on careful balance of range and performance DETROIT, Mich. – The 2017 Chevrolet Bolt EV does more than set a new benchmark for affordable, long-range EV driving. It also raises the bar when it comes to driving performance. Engineers developed the Bolt EV's propulsion system to offer more than an estimated 200 miles (based on GM estimates) and a delightful driving experience that's more akin to a compact sports sedan than a small utilitarian crossover. "Being the leader in range and affordability means nothing if the car isn't going to excite you each time you get behind the wheel," said Josh Tavel, Chevrolet Bolt EV chief engineer. "That's why the team was tasked with delivering a propulsion system that would also make the Bolt EV an electric vehicle that owners would love to drive." Single Motor Drive Unit Like most EVs on the road, the Bolt EV's drive system uses a single high capacity electric motor to propel the car.

Junkyard Gem: 1980 Chevrolet LUV Mikado

During the 1970s and into the 1980s, each member of the Detroit Big Three imported Japanese small pickups and sold them with Ford (Mazda Proceed), Dodge/Plymouth (Mitsubishi Forte), or Chevrolet (Isuzu Faster) badges here. Ford developed the Ranger and killed the Courier for 1983 (though Americans could still buy the Mazda-badged version all the way through 1993), while The General axed the LUV after the S-10 debuted in the 1982 model year. Isuzu sold the same truck as the P'up through 1987, though, and we might as well follow up our recent P'up Junkyard Gem with its LUV predecessor. LUV stood for Light Utility Vehicle, and I've managed to spot a handful in the boneyards over the years. This one now resides in a yard in northeastern Colorado. The Mikado trim package included striped seat upholstery and a sporty steering wheel, plus these cool dash badges. As far as I can tell, no LUV Mikado advertising featured any Gilbert and Sullivan tunes. This one is fairly rusty for Front Range Colorado, and it has endured a bed swap from some other small truck. The engine is the 75-horse Isuzu 1.8-liter. Members of this engine family went into everything from Chevy Chevettes to Isuzu Troopers in the United States. Very unusually for a small pickup during the Malaise Era, this one has a luxurious automatic transmission. Acceleration must have been a leisurely affair in this truck. Air conditioning? Unheard of! Someone stuck every one of their lunchtime apple stickers on the driver's door. After 41 years of work, this truck is done. Come on strong in a LUV of your own!

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.