2002 Chevrolet Camaro Ss 35th Limited Addition 579 Actual Miles,stored 12 Years. on 2040-cars

Auto blog

Buick Encore, Chevy Trax reportedly dead after 2022

The Buick Encore will not get an encore, and the Chevrolet Trax is dead in its tracks. Separate unverified reports say the two crossovers, which are essentially identical underneath the sheetmetal, will retire at the end of the 2022 model year without being directly replaced. Citing anonymous sources, enthusiast website GM Authority wrote that production of the Encore and the Trax is scheduled to end in the third quarter of 2022. Both models are manufactured in Bupyeong-gu, South Korea, and General Motors will reportedly use the extra production capacity to build more examples of the Trailblazer, which outsold the Encore and the Trax combined by a significant margin in 2021. General Motors hasn't commented on the report, but we wouldn't be surprised if the end is indeed near for the Encore and the Trax. Buick released the Encore for the 2013 model year, and Chevrolet launched the Trax for 2015, but the model made its debut as the Opel Mokka in 2012. It's at the end of its life cycle, and sales figures reflect this: 20,072 units of the Encore were sold in America in 2021, a drop of 52% compared to 2020, while 42,590 examples of the Trax found a home, a 60% decline. It's further proof that Americans don't like small cars. Viewed in that light, the decision not to replace either crossover makes perfect sense. If the report is accurate, the Encore GX (which is not related to the Encore in any way) will enter the 2023 model year as Buick's entry-level model. The situation is a little more complicated at Chevrolet: The pocket-sized Spark is on its way out in 2022 as well, meaning that the Trailblazer will become the entry point into the range. It's a different story in Europe: Opel, which is now part of the Stellantis group, released the second-generation Mokka in June 2020.

GM Recalls 218,000 Chevy Aveo Models Over Fire-Prone Lighting

The recall train keeps on rolling for General Motors. Hot on the heels of its recent 2.4 million-vehicle recall of various models, it's now calling in 218,000 Chevrolet Aveo units from the 2004-2008 model years because they could catch fire. The problem concerns the daytime running light module in the instrument panel. It could overheat, melt and cause a fire. According to GM spokesperson Alan Adler, "We are aware of some fires," and the company "is still investigating." Adler wouldn't comment about how many fires were reported or when the automaker was first aware of this issue because of the ongoing analysis. However, he said the issue has not caused any injuries or fatalities. GM also doesn't have a fix for the problem with the DRL module yet. The company says in its recall statement to the National Highway Traffic Safety Administration that the remedy "is still under development." Adler wasn't sure when it would be ready, but he said Aveo owners would receive notification in the mail "relatively soon." They will receive a second letter later to schedule the repair. In a separate letter about the Aveo's problem to NHTSA (viewable here as a PDF), GM said its Executive Field Action Decision Committee decided to conduct the recall on May 16. Scroll down for the recall report. RECALL Subject : Daytime Running Light Module Overheating Report Receipt Date: MAY 19, 2014 NHTSA Campaign Number: 14V261000 Component(s): Potential Number of Units Affected: 218,000 Manufacturer: General Motors LLC SUMMARY: General Motors is recalling certain model year 2004-2008 Chevrolet Aveo vehicles equipped with daytime running lights (DRL). In the affected vehicles, there may be heat generated within the DRL module located in the center console in the instrument panel, which could melt the DRL module. CONSEQUENCE: If the DRL module melts due to the heat generation, it could cause a vehicle fire. REMEDY: The remedy for this recall campaign is still under development. The manufacturer has not yet provided a notification schedule. Owners may contact General Motors customer service at 1-800-222-1020 (Chevrolet). General Motors recall number for this campaign is 14236. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.