1969 Chevrolet Camaro Rsss on 2040-cars

Auto blog

Chevy finishes restoration of damaged 1 millionth Corvette

When a sinkhole at the National Corvette Museum devoured eight, rare examples of the iconic American sports car last year, some of the victims emerged better than others. While damaged, the 2009 Corvette ZR1 Blue Devil was able to drive out under its own power, making for a fairly straightforward restoration. Meanwhile, the one-millionth 'Vette came out looking like a pancake. Bringing the convertible back to perfection has taken four months and 1,200 man-hours, but the milestone car is finally on display again. After being a brief exhibit at the National Corvette Museum, the millionth 'Vette was moved to the General Motors Design Center. There, a 30-person team started on the difficult restoration. "When we disassembled it, we found that each employee involved in building it had signed a part of the car, which was fantastic and moving to see," said GM executive Mark Reuss. Therefore, the team tried to retain as many original parts as possible. The damage was extensive, and repairs included straightening the front sub-frame damage, patching the seats, and carefully restoring the dashboard pad to maintain the signatures below. The hood, front fascia, and side sills were replaced with parts from a donor vehicle. To keep the 'Vette perfect, the team scanned the names and put them on the new components. In one case, they even went back to an original employee to sign a replacement part. Surprisingly, the engine and transmission were fine. With the work done, the National Corvette's Museum's revived exhibit is nearly complete. Five of the other cars aren't being restored, and the museum is bringing the 1962 Corvette back to life. <p>Your browser does not support iframes.</p> Chevrolet Fulfills 1 Millionth Corvette Restoration Pledge Sinkhole-damaged milestone returns to National Corvette Museum 2015-09-03 BOWLING GREEN, Ky. – After more than four months and 1,200 man-hours of painstaking craftsmanship, restoration of the milestone 1 millionth Corvette – a white 1992 convertible – is complete. It was unveiled today at the National Corvette Museum, where it returns as part of the permanent exhibit. The car was damaged on Feb. 12, 2014, when it and seven other rare Corvettes tumbled into a sinkhole that opened beneath the museum's Skydome area. Chevrolet pledged to restore it.

GM takes 2020 full-size pickup sales crown

It's no secret that 2020 was an unconventional year for auto sales. Extenuating circumstances or not, it was a year of upheaval even for ever-resilient (and ever-profitable) pickups, with General Motors taking the crown from Ford in the full-size segment.  The Ford F-Series still outsold every other full-size pickup nameplate in the country by a significant margin. It's only when you combine GM's Chevrolet Silverado and GMC Sierra variants that you get a number that exceeds Ford's. This isn't really a new phenomenon, either. In fact, it was only somewhat recently that Ford took the overall full-size crown away from GM, and not only did Ford widen the gap in recent years, but Ram has once again become a legitimate challenger, even managing to outsell the Silverado by a healthy margin in 2019, but never coming close to the F-Series in terms of total volume.  But, 2020 being 2020, things got weird yet again. Ram remains relevant, of course, but Ford got caught with its pants down thanks to the one-two punch of COVID and the generational changeover of the core F-150 model, which resulted in a production interruption as the company's assembly facilities transitioned from building the old 2020 model to the new-for-2021. This perfect storm, as it turns out, was sufficient for GM to walk away with the full-size crown. See for yourself: Full-size 2020 pickup sales: GM total: 847,110 F-Series: 787,422 Silverado: 594,094 Ram: 563,676 Sierra: 253,016 Tundra: 109,203 Titan: 26,439 As you can see, Ram slipped back behind Silverado, slotting comfortably into third place. The Silverado 1500 had a flat year, but the heavy- and medium-duty variants bucked the trend and contributed to a slight uptick in sales for the nameplate, while F-Series tumbled more than 12% (nearly 110,000 units), opening the door for GM to steam ahead.  There were similarly significant shakeups in the midsize truck segment. First, 2020 was the first full year of retail sales for the Gladiator pickup, which surged to fourth place behind the stalwart Tacoma, Ranger and Colorado. GM's combined sales of the Colorado and Canyon are good enough for second place by manufacturer, but nowhere close to what it would take to dethrone Toyota.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.