1969 Chevrolet Camaro Rs Convertible Hugger Orange 350 Rotisserie Restored on 2040-cars

Auto blog

2022 Chevy Silverado HD gains Multi-Flex tailgate as an option

GM is spreading the Multi-Pro Tailgate love around its truck lineup, and the Silverado HD is the latest pickup to gain the option. Just like the 2021 Silverado 1500, Chevy uses the “Multi-Flex” name for it in the HD, eschewing GMCÂ’s “Multi-Pro” branding for the bowtie vehicles. YouÂ’ll be able to option the tailgate on 2022 model year Silverado 2500HD and 3500HD models. ItÂ’ll be available optionally in every trim, so thereÂ’s no need to grab a more expensive trim to gain access to the trick tailgate — youÂ’re also not required to take it in higher trims. Functionality is the same as the standard Silverado and Sierra.  The primary gate opens and closes like any other tailgate out there. ThereÂ’s a primary gate load stopper that allows you to put the gate down and still keep things from flying out the back (it can also be arranged such that the load stopper is at a higher height by using the inner gateÂ’s stopper). The inner gate folds down perpendicular to the ground to allow closer access to the bed. A full-width step is available if you fold both “gates” down and pop out the inner panel. And lastly, the inner gate can be lowered to use it as a small work space. You can watch the short video above to get a quick run through of all the positions, or scroll through the gallery at the top of this post. Besides the tailgate, Chevy says the 2022 Silverado HD is gaining a new Greenstone Metallic exterior paint color. Other changes for 2022 were not detailed at this time, but Chevy says the trucks with this tailgate should be available sometime this summer. Related video:

GM re-recalls 11k SUVs

General Motors is recalling a bunch of previously recalled SUVs because, well, they still aren't quite fixed. The latest repairs are necessary on 10,974 SUVs in North America, including 9,932 in only the US. Affected models include the 2006-2007 Buick Rainier, Chevrolet Trailblazer, and GMC Envoy; plus the 2006 Trailblazer EXT and Envoy XL. While not listed by NHTSA, a statement by GM to Autoblog says the 2006-2007 Saab 9-7X and Isuzu Ascender are also affected. In these SUVs, it's possible that liquid could get into the driver's door master power window switch module and cause a short circuit. This could potentially lead to a fire, and owners are urged to park the vehicles outside until repaired. GM has been trying to fix this issue for years. It started as an investigation into fires, and that led to a recall for about 250,000 vehicles in cold-weather states. A nationwide campaign came in 2013 for 193,000 of them in the US. Last year, the automaker decided to replace the whole module as a repair. However in a recent investigation of these recalls, GM discovered that this latest group of SUVs never received the new part. According to documents submitted to NHTSA (as a PDF), "Some dealers incorrectly used the labor code associated with module replacement when, instead of replacing the module, they only added a protective coating to the module." To fix things this time, the models finally get the correct component. Related Video: GM Statement General Motors is recalling 9,932 older midsize SUVs in the U.S. because they were mistakenly excluded from an earlier recall. Certain 2006 Chevrolet TrailBlazer EXT and GMC Envoy XL, and 2006-2007 TrailBlazer, Envoy, Buick Rainier, Saab 9-7X and Isuzu Ascender vehicles may continue to have a condition in which the printed circuit board inside the driver's door may corrode and short if exposed to certain fluids such as melted snow containing road salt. GM is aware of four fires but no crashes, injuries or fatalities associated with the expanded recall. The total number of vehicles being recalled, including Canada, Mexico and exports is 10.974. Customers are urged to park these vehicles outside until repairs have been made. GM reported this recall to the NHTSA on September 23.

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.