1967 Camaro Ss 350 4spd Super Solid Sharp Red on 2040-cars
Cincinnati, Ohio, United States
Body Type:Coupe
Engine:350
Vehicle Title:Clear
For Sale By:OWNER
Interior Color: Black
Make: Chevrolet
Number of Cylinders: 8
Model: Camaro
Trim: 2 DOOR HARDTOP
Drive Type: REAR WHEEL
Options: CD Player
Mileage: 78,000
Sub Model: SUPER SPORT
Warranty: Vehicle does NOT have an existing warranty
Exterior Color: Red
SUPER SHARP 1967 CAMARO SS 350 4SPD IN BEAUTIFUL RED
BE SURE TO CHECK OUT THIS LINK TO MAY MORE DETAILED PICTURES OF THIS CAR :
| http://CLASSICAMERICANMUSCLECARS.fototime.com |
FOR WALK AROUND VIDEO OF THIS CAMARO RUNNING FOLLOW LINK BELOW:
PLEASE EMAIL DAN400GTO@HOTMAIL.COM OR CALL 513-615-5755 WITH ANY QUESTIONS
IF YOU NEED SHIPPING I HAVE A SHIPPING SOURCE THAT HAS VERY REASONABLE RATES AND SHIPS IN A TIMELY MANNER.
IF YOU NEED FINANCING HERE ARE SOME VERY GOOD SOURCES:
JJ BEST 1-800-USA-1965
|
1-800-689-1789 CAPITAL ONE AUTO
TERMS:
Notice To Bidders: High Bidder to send $700.00 non-refundable deposit within 48 hours of the close of this auction. Funds to be paid with Certified Check, Bank Transfer, or Cash in person within 5 days of auction ending. All sales final. Vehicle is sold in "as is " condition. All inspections and confirmation of condition are the responsibility of the buyer. May sell to the highest bidder if reserve is not met and will entertain offers before end of auction. I reserve the right to terminate this auction at any time. Shipping costs are the responsibility of the purchaser but I will try to help anyway I can. Negative feedback bidders or ZERO feedback bidders please contact me before bidding. Do not bid unless you intend to buy. Thank you and good luck! You are entering into a legal binding contract to purchase the vehicle described above. If you do not intend to purchase this item, do not bid! Bidders must be able to pay cash or have all loans pre-approved before bidding on this vehicle! Unqualified bidding, Deadbeat bidding, or Auction interference will be subject to legal prosecution to the fullest extent of the law. Thank you very much for your understanding.
POSSIBLE CLASSIC CAR LOAN OPTIONS:
http://www.hagerty.com/finance/finance_index.aspx
http://www.woodsidecredit.com/
http://www.jjbest.com/
http://www.motorcarsfinancial.com/
BE SURE TO CHECK OUT THIS LINK TO MAY MORE DETAILED PICTURES OF THIS CAR :
| http://CLASSICAMERICANMUSCLECARS.fototime.com |
EMAILS TO DAN400GTO@HOTMAIL.COM OR CALL 513-615-5755 THANKS
NOTE: PLEASE CALL ME AT 513-615-5755 WITH ANY QUESTIONS OR OFFERS THANKS
Chevrolet Camaro for Sale
1993 chevrolet camaro z28
Ground effects rs package 20" alloy heated leather seats v8 automatic certified(US $33,495.00)
1998 chevrolet camaro b4c police special service package z28 ls1(US $7,500.00)
2010 chevrolet camaro ss coupe 2-door 6.2l
1968 ss chevy camaro - first gen., 396 big block, restored
1971 chevrolet camaro - hugger orange - white racing stripes - 350 crate motor(US $14,500.00)
Auto Services in Ohio
Williams Norwalk Tire & Alignment ★★★★★
White-Allen European Auto Grp ★★★★★
Welch`s Golf Cart Inc ★★★★★
Vehicles Unlimited Inc ★★★★★
Tom`s Tire & Auto Service ★★★★★
Smith`s Automotive ★★★★★
Auto blog
GM to sink over $900M into 4 plants, mostly for a new V8
Fri, Jan 20 2023FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.
GM recalls Cadillac ATS and Chevy Impala for separate issues
Fri, Feb 27 2015The National Highway Traffic Safety Administration added two recalls from General Motors in the government organization's daily update of safety campaigns. Both were for failing to meet Federal Motor Vehicle Safety Standards but for completely separate reasons. The larger recall covers 58,698 units of the 2013-2015 Cadillac ATS, but it doesn't really carry huge safety concerns. In vehicles produced between April 25, 2012, and February 9, 2015, the controls for the tilt and slide of the moonroof are not recessed enough, as required by federal law. According to NHTSA, it's possible that someone could inadvertently activate the auto-close for the roof panel, which the agency claims increases "the risk of personal injury." Dealers will install a new trim plate that will add the necessary clearance. The other campaign covers 1,177 examples of the 2014 Chevrolet Impala from between November 15, 2012, and May 27, 2014. However, this is actually a repeat of a previous recall on the Chevy and the Cadillac XTS from 2014. The affected Impalas here "were remedied incorrectly" under the earlier campaign, according to NHTSA. On these sedans, it's possible the electronic parking brake might not fully disengage and still remain in some contact with the rotor, which is in violation of federal rules. The fault can cause excessive heat from the brakes that could potentially lead to a fire, according to NHTSA. To fix the problem, dealers will reprogram the electronic parking brake control module. Show full PR text RECALL Subject : Inadvertent Press of Roof Panel Switch/FMVSS 118 Report Receipt Date: FEB 24, 2015 NHTSA Campaign Number: 15V106000 Component(s): VISIBILITY Potential Number of Units Affected: 58,698 All Products Associated with this Recall Vehicle Make Model Model Year(s) CADILLAC ATS 2013-2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2013-2015 Cadillac ATS vehicles manufactured April 25, 2012, to February 9, 2015. In the affected vehicles, the power-operated roof panels auto-close when the non-recessed "Slide" or "Tilt" switches are pressed. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standards (FMVSS) No.
We really want to use an eCrate to restomod an old GM car. Here's what we'd build
Fri, Oct 30 2020You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff. This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries. So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason. 1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.  1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.




















