Chevrolet C/K Pickup 1500, page #17

Chevrolet C/K Pickup 1500 Price Analytics

About Chevrolet C/K Pickup 1500

Auto blog

GM's Fairfax, Kansas, plant closed through mid-August due to chip shortage

General Motors is further extending downtime at its Fairfax Assembly facility in Kansas City, Kan., due to ongoing microchip supply issues, the company confirmed late Monday. The plant will now remain idled through at least Aug. 16, Automotive News reports. The facility, which produces the Cadillac XT4 and (for now, anyway) the Chevrolet Malibu, was already slated to be on standby until after the upcoming July 4th holiday weekend, but GM was forced to extend the outage again – this time by more than an another month – due to the continued lack of electronic component supply.  While microchip production has begun to catch up to existing production demand, it could take months (perhaps even more than a year) for customers to see relief from the shortage.  Related video:

The future's electric — but the present is peak gasoline. Burn some rubber! Do donuts!

I vividly remember the year 1993 as a teenager looking forward to getting my driver’s license, longingly staring into Pontiac dealerships at every opportunity for a chance to see the brand-new fourth-generation Firebird and Trans Am. Back then, 275 horsepower, courtesy of GMÂ’s LT1 5.7-liter V8 engine, was breathtaking. A few years later, when Ram Air induction systems freed up enough fresh air to boost power over 300 ponies, I figured we were right back where my fatherÂ’s generation left off when the seminal muscle car era ended around the year 1974. It couldn't get any better than that. I was wrong. Horsepower continued climbing, prices remained within reach of the average new-car buyer looking for cheap performance, and a whole new level of muscular magnitude continued widening eyes of automotive enthusiasts all across the United States. It was all ushered in by cheap gasoline prices. And as much as petrolheads bemoan the coming wave of electric vehicles, perhaps instead now would be a good time for critics to sit back and enjoy the current and likely final wave of internal combustion. Today, itÂ’s easier than ever to park an overpowered rear-wheel-drive super coupe or sedan in your driveway. Your nearest Chevy dealership will happily sell you a Camaro with as much as 650 horsepower. Not enough? Take a gander at the Ford showroom and youÂ’ll find a herd of Mustangs up to 760 ponies. Or if nothing but the most powerful will do, waltz on over to the truly combustion-obsessed sales team of a Dodge dealer and relish in the glory of a 797-hp Charger or 807-hp Challenger. Want some more luxury to go with your overgrown stable of horses? Try Cadillac, where you'll find a 668-horsepower CT5-V Blackwing. You could instead choose to wrap that huffin' and chuggin' V8 in an SUV. Or go really off the rails and buy a Ram TRX or Jeep Wrangler Rubicon 392 and hit the dunes after a quick stop at the drag strip. Go pump some gas. Burn a little rubber. Do donuts! There is nothing but your pocketbook keeping you from buying the V8-powered car of your dreams. Yes, just about every major automaker in the world has halted development of future internal combustion engines in favor of gaining expertise in batteries and electric motors. No, that doesnÂ’t mean that gasoline is going extinct. There are going to be gas stations dotting American cities and highways for the rest of our lifetimes.

GM recalling 135,000 SUVs with plastic jacks that can break

General Motors is recalling 135,400 compact crossovers because their emergency jack can break under load. The problem occurs when the jack — which is plastic — isn't positioned correctly as detailed in the owner's manual. This can cause the jack to fracture. If the jack breaks and the vehicle collapses, there's a risk of injury or death, according to an NHTSA recall alert. The recall involves the 2020-22 Buick Encore GX and 2021-22 Chevrolet Trailblazer. A GM test driver discovered the problem when he broke a jack during a durability test on a Trailblazer. GM started investigating in April and found 21 claims of jack failures, including one reported injury. "This jack design may not be sufficiently robust against fractures if improperly or incorrectly positioned on the vehicle frame by the user," a NHTSA safety report said. GM will start notifying vehicle owners July 26. It will provide free replacement jacks that are made of metal.   Featured Gallery 2021 Buick Encore GX View 21 Photos Recalls Buick Chevrolet GM

GM removes start/stop from full-size trucks and SUVs with V8 engines

GM is removing start/stop technology from a number of its popular full-size SUVs due to the ongoing chip shortage. This follows the removal of cylinder deactivation technology from some of its trucks, which was also due to the chip shortage. GM Authority first reported the news, but we’ve just confirmed everything with a GM spokesperson.  The following 2021 model year vehicles will be affected: Chevy Tahoe, Chevy Suburban, GMC Yukon, Cadillac Escalade, Chevrolet Silverado 1500 and GMC Sierra 1500. Only versions of those vehicles built with the 5.3-liter V8 or 6.2-liter V8 and mated to the 10-speed automatic will have the tech removed from them. Only vehicles manufactured on or after June 7 will be affected. “By taking this measure, it will enable us to continue production of our high-demand full-size SUV and pickups as the industry continues to rebound and strengthen,” GM said in a statement. Those who ultimately buy one of these vehicles without start/stop technology will receive a $50 discount off MSRP for their troubles. Losing this fuel-saving tech could be a big negative for some, but we know many folks turn it off anyway. Not having to press the button to deactivate start/stop every time could actually be a positive if youÂ’re part of the camp who does that already. 2021 Cadillac Escalade Sport Platinum View 27 Photos On the downside, GM says “most of the affected vehicles will experience a minor reduction in fuel economy.” We donÂ’t have revised window stickers in hand to know how each model will be affected, but any 1 mpg reduction will be rather impactful for vehicles rated as low as these trucks already are. Any reduction will be seen in the city mpg rating, so take the kind of driving youÂ’re going to be doing into account before purchasing. When it comes to greenhouse gas compliance rules, GM says it doesnÂ’t foresee this impacting the companyÂ’s average fleet score. It also intends to begin adding start/stop back to these models as soon as possible, but there will be no retrofit effort made to fit the tech to vehicles already built without it. “Our supply chain organization continues to make strides working with our supply base to mitigate the near-term impacts of the semiconductor situation,” GMÂ’s statement reads. “GM continues to leverage every available semiconductor to build and ship our most popular and in-demand products, including our highly profitable full-size trucks and SUVs for our customers.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Next-generation Chevrolet Colorado breaks cover in new spy photos

The next-generation Chevrolet Colorado broke cover in this fresh set of spy photos this week, giving us a glimpse of what to expect when GM's compact trucks are replaced in what is expected to be either 2023 or 2024.  Thanks to its still-extensive camouflage, this prototype doesn't give away a ton about the new Colorado's styling, but in profile, it appears as though the swoopy, upswept rear cab line might become a thing of the past. We wouldn't be surprised to see the new Colorado adopt a more angular, squared-off look more akin to that of its big brother, the half-ton Silverado. The Silverado is also expected to donate what may be the new Colorado's only powertrain. Taking a cue from Ford, Chevy is expected to offer the next-gen Colorado with just a turbocharged four-cylinder engine — the new corporate 2.7T in this instance. The large, 310-horsepower four-pot can easily take over for the 3.6L V6 currently available in the GM twins and one-up the 270-hp Ranger to boot. This would mark the end of both a V6 and diesel option being offered in GM's midsize trucks, and tracks with the company's slow, silent effort to eliminate lower-margin models. We say "trucks" because, well, whatever happens with Chevy is likely to translate to GMC. The Canyon will be due for replacement at the same time, and will likely carry on as a re-skin of Chevy's offering. We're not yet certain exactly when Chevrolet will start selling the next-gen Colorado, but given the reasonably complete state of this prototype, we expect it won't be long now. Rumors suggest it could hit the market in 2023 as a 2024 model.  Related Video: The Best Midsize Pickup: Ranger vs Gladiator vs Tacoma vs Colorado

2022 Chevy Silverado HD gains Multi-Flex tailgate as an option

GM is spreading the Multi-Pro Tailgate love around its truck lineup, and the Silverado HD is the latest pickup to gain the option. Just like the 2021 Silverado 1500, Chevy uses the “Multi-Flex” name for it in the HD, eschewing GMCÂ’s “Multi-Pro” branding for the bowtie vehicles. YouÂ’ll be able to option the tailgate on 2022 model year Silverado 2500HD and 3500HD models. ItÂ’ll be available optionally in every trim, so thereÂ’s no need to grab a more expensive trim to gain access to the trick tailgate — youÂ’re also not required to take it in higher trims. Functionality is the same as the standard Silverado and Sierra.  The primary gate opens and closes like any other tailgate out there. ThereÂ’s a primary gate load stopper that allows you to put the gate down and still keep things from flying out the back (it can also be arranged such that the load stopper is at a higher height by using the inner gateÂ’s stopper). The inner gate folds down perpendicular to the ground to allow closer access to the bed. A full-width step is available if you fold both “gates” down and pop out the inner panel. And lastly, the inner gate can be lowered to use it as a small work space. You can watch the short video above to get a quick run through of all the positions, or scroll through the gallery at the top of this post. Besides the tailgate, Chevy says the 2022 Silverado HD is gaining a new Greenstone Metallic exterior paint color. Other changes for 2022 were not detailed at this time, but Chevy says the trucks with this tailgate should be available sometime this summer. Related video:

Jeep Wrangler 4xe, new Honda Civic and EV infrastructure | Autoblog Podcast #677

In this episode of the Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder and Yahoo Finance Senior Producer/Reporter Pras Subramanian. They start things off by talking about what they've been driving, including the Jeep Wrangler 4xe, Chevy Bolt EUV, Nissan 370Z Nismo and Mitsubishi Eclipse Cross. They discuss the reveal of the next-generation Honda Civic, opine about the Mercedes-AMG One hybrid supercar, talk about EV charging infrastructure and reminisce about the Hyundai Genesis Coupe. Finally, they reach into the mailbag to help a listener pick a used grand tourer. Autoblog Podcast #677 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving:2021 Jeep Wrangler 4xe 2022 Chevrolet Bolt EUV 2020 Nissan 370Z Nismo 2022 Mitsubishi Eclipse Cross News 2022 Honda Civic revealed Mercedes-AMG One spy photos Green infrastructure Why the gas stations of the future might not include EV chargers — yet Ultium Charge 360 Used Vehicle Spotlight: 2010-2016 Hyundai Genesis Coupe  Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Autoblog is now live on your smart speakers and voice assistants with the audio Autoblog Daily Digest. Say “Hey Google, play the news from Autoblog” or "Alexa, open Autoblog" to get your favorite car website in audio form every day. A narrator will take you through the biggest stories or break down one of our comprehensive test drives. Related Video:

McLaren, Koenigsegg, Toyota, Ford, Dodge and Corvette Lego kits announced for 2021

Lego has announced a slew of car-themed sets for 2021. The six kits comprise nine vehicles and fall under the brick pusher's Speed Champion line of official OEM-licensed kits. News of their arrival comes from German toy retailer JB Spielwaren's pre-order listings, which show three single-car sets and three dual-car sets of matched marques. Starting with the McLaren Elva roadster, the kit consists of 263 pieces and is finished in blue. It seems to have a difficult time capturing the curves of the real-life Elva, but there's only so much you can do with a bunch of plastic blocks. Lego has made several other McLaren kits before, including the Senna, 720S, and a more advanced Senna GTR for the Technics line. Next up is the Koenigsegg Jesko, made up of 280 pieces and finished in white. Though the real-life Jesko is still curvy, this kit does a better job of replicating its aggressive maw, vents and cantilevered rear wing. Rounding out the single-car sets is the 299-piece Toyota GR Supra in yellow. This marks the first time Toyota has lent their license to Lego. Again, it struggles a bit to represent the curvy Supra, relying on printed details like logos and headlights to identify. On the other hand, the Chevrolet two-car does a stupendous job with the 1968 Corvette. The C3 is instantly recognizable as such. The C8-R race car it's paired with suffers from the same issues as some of the previous cars, though. The set contains 512 pieces, and funnily enough the C8 driver has short hair while the C3 driver sports a period-correct wavy mane. The next set is a 627-piece Mopar-themed pair, including a purple (Plum Crazy?) 1970 Dodge Challenger T/A and an SRT top fuel dragster. The race car is spot on, but the Challenger was probably tough to make given the width restrictions. It looks a couple of pegs too narrow compared to the wide proportions of the real deal. Last but not least, the Ford set contains a Bronco R and Ford GT Heritage Edition. Consisting of 660 pieces, the set does an excellent job of representing both cars. The GT looks faithful in its Gulf livery, and the Bronco R looks more like a real Bronco than the actual Bronco R race truck. All in all, it's always fun to see more Lego sets with real cars, and we're glad to see more manufacturers added to the roster. The single-car sets are recommended for ages 7 and up, while the double-car sets have an 8 years and up rating. Price in U.S.

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).