454ss 1992 Original Victory Red on 2040-cars

Auto blog

GM recalls 740,000 vehicles over daytime running light issue

General Motors is recalling over 740,000 vehicles due to a daytime running light issue that causes all of the affected cars to run afoul of Federal Motor Vehicle Safety Standards. Vehicles affected by this recall are spread across many of GM’s brands. Models include the 2020-2023 Cadillac CT4 and CT5, 2021-2023 Buick Envision, 2022-2023 Cadillac Escalade and Escalade ESV, 2022-2023 Chevrolet Silverado 1500, Suburban, Tahoe and 2022-2023 GMC Sierra 1500, Yukon, and Yukon XL. GM says that the daytime running lights may remain on in these cars when the headlights are activated. This is a problem, because FMVSS rules require that the daytime running lights deactivate once the headlights turn on. If the DRLs remain on, GM says that could result in additional glare, thereby increasing the risk of an accident. The cause of this failure to deactivate the DRLs comes from body control module software that “under a combination of certain pre-conditions, could fail to deactivate the DRLs,” according to GM. Other GM vehicles were tested, but due to a difference in software or hardware, they remain unaffected. If this is reminding you of another recent GM recall, youÂ’d be right, as GM recalled another 340,000 vehicles for the same issue last month. After that original issue was found within GM, the company began looking into its other cars to determine if the population was larger than originally thought. GM found the additional vehicles included in todayÂ’s recall have the problem. The fix will either be via an over-the-air update or it will require you to bring the vehicle into a dealer for a software update, depending on which vehicle you have. Owner notification letters letting folks know what is necessary are currently scheduled to go out on January 23, 2023. Related video: Cadillac Escalade Infotainment Review

2016 Chevrolet Camaro powers up, slims down

Don't be fooled by its familiar appearance, the 2016 Chevrolet Camaro is vastly different than its iconic predecessors. It has a new chassis, a fresh engine lineup, and is loaded with clever technologies that promise to invigorate and improve the sixth generation of Chevy's legendary sports car. It was revealed Saturday before a crowd of enthusiastic Camaro revelers on Belle Isle in Detroit. Redesigning the sports coupe was a heady task, especially as its archrivals, the Ford Mustang and Dodge Challenger, drive better and are more powerful than ever. But the new Camaro is aiming to be the best combination of handling and raw performance, with quick acceleration and competitive fuel economy. "Redesigning the Camaro is thrilling and challenging all at once, but the secret is to offer something more," Mark Reuss, General Motors executive vice president of product development, said in a statement. It all began with a weight-loss plan. The new Camaro shed more than 200 pounds compared with the outgoing car, with 133 pounds coming from a lighter body-in-white. Then engineers culled weight nearly everywhere, using aluminum for the instrumental panel frame and some suspension components to trim as much fat as possible. The slimmer body rests on new bones. The Camaro's rear-wheel-drive platform is lighter and stiffer in a bid to improve handling. It's a modified version of the underpinnings used by the Cadillac ATS, though about 70 percent of the architecture is unique to the Camaro. Chevy said structural rigidity is improved by 28 percent. As you'll see, healthy doses of Cadillac and Corvette technologies have been used to bolster the Camaro's drive character and performance. The new car is also expected to handle better thanks to a slightly smaller footprint. It is about two inches shorter in length, with most of that due to the more compact wheelbase. It's also an inch shorter in height and an inch slimmer in width. So yes, the Camaro will be leaner, but it will still be plenty mean. The Camaro SS tops the range (for now) with the Corvette's 6.2-liter V8 pushing put 455 horsepower and 455 pound-feet of torque. Known as the LT1, is has a cast aluminum block and cast aluminum cylinder heads, and it's fortified with direct injection, variable valve timing, and cylinder deactivation. About 20 percent of the engine's parts are said to be unique to the Camaro, including the exhaust manifolds.

2016 Chevrolet Camaro design teased

Chevrolet just can't seem to help itself from continuing to tease the next-gen Camaro. The pony car gets its official debut at a big event on Detroit's Belle Isle on May 16, but the upcoming model's new exhaust, suspension components, and wheels are already well known. With this latest taste, we're finally getting an official glimpse at what the coupe actually looks like. The 2016 Camaro's shape hasn't completely been a secret, and even Chevy showed it testing while covered in camouflage in March. Still, these shots are a great opportunity to check out some undisguised details for the new model. The styling is supposed to be "more athletic," according to Chevy, and the aluminum hood looks especially good with crisp, straight lines forming the design. "It's a more expressive evolution of the Camaro's iconic character – and one that complements its leaner size and sharper reflexes," GM global design boss Ed Welburn said in a statement. These two photos suggest a more angular, futuristic shape for the upcoming pony car. We're looking forward to seeing it all in a couple weeks. Sculpted Exterior Reflects 2016 Camaro's New Athleticism 2015-04-30 DETROIT – For the all-new 2016 Chevrolet Camaro, the design team set out to create a leaner, more athletic design that complemented the new driving experience. "The Camaro went to the gym and came out with a lithe, more athletic physique for the sixth generation," said Ed Welburn, vice president, GM Global Design. "It's a more expressive evolution of the Camaro's iconic character – and one that complements its leaner size and sharper reflexes." The exterior design vocabulary is defined by complex shapes, which appear to be form-fitted around the mechanical components. Every shape and surface detail is a skilled, artistic collaboration of hand and digital sculpting. Camaro's new design details draw the eye into the design. For example, the new aluminum hood features powerful, smoothly curved sculpted forms accented with sharp creases. As a result, the hood appears to be shrink-wrapped around the engine. Similarly, the new Camaro retains the broad, dramatic rear fenders that became a defining feature of the award-winning Gen 5 Camaro. The design is updated with greater detailing, including a subtle crease running parallel to the fender edge. The effect makes the new Camaro look even lower and wider despite having a slightly smaller footprint than its predecessor.