2004 Silverado Ls on 2040-cars

Auto blog

Chevy Malibu will become 45-mpg strong hybrid with next update

Come next year there'll be no more mild hybrid pretensions for the Chevrolet Malibu - the next-generation sedan will borrow technology from the 2016 Volt and get a proper hybrid powertrain. A 1.8-liter four-cylinder engine gets help from a two-motor drive unit adapted from the Volt for 182 system horsepower, the motor drive powered by an 80-cell, 1.5-kWh lithium-ion battery. Chevrolet says that when combined with features like grille shutters and a lower ride height, it expects the Malibu Hybrid will post a combined fuel economy rating of more than 45 miles per gallon, which would best the hybrid trims of the Ford Fusion, Toyota Camry and Hyundai Sonata. Electric power alone can power the car up to 55 miles per hour, and The Bowtie's first use of exhaust gas heat recovery will help maintain high hybrid performance in cold weather and be used to heat the engine and cabin. The Malibu Hybrid should go on sale in the Spring of next year, for now there's a press release below. Chevrolet Malibu Hybrid Derives Technology from Volt GM estimates combined fuel economy ratings to exceed 45 mpg DETROIT, 2015-03-25 – Chevrolet's recent production announcement of its all-electric vehicle based on the Bolt EV concept, as well as the introduction of the 2016 Chevrolet Volt, will be joined by a strong hybrid version of the next-generation Malibu. Using technology from the 2016 Chevrolet Volt propulsion system, Malibu Hybrid will offer an estimated combined fuel economy rating exceeding 45 mpg, higher than the combined mileage ratings of the Ford Fusion, Toyota Camry and Hyundai Sonata hybrid variants. "The 2016 Malibu Hybrid will offer impressive fuel economy, exceptional driving characteristics and gorgeous styling," said Jesse Ortega, Chevrolet Malibu chief engineer. "Besides leveraging innovation from the Chevrolet Volt, the Malibu Hybrid also has unique features that help improve aerodynamics, like upper and lower grille air shutters to improve airflow and a reduced ride height, all of which help reduce fuel consumption," Ortega said. An all-new direct-injection 1.8L 4-cylinder engine mated to a two-motor drive unit slightly modified from the 2016 Chevrolet Volt drive unit powers the Malibu Hybrid. The drive unit provides additional power to assist the engine during acceleration, for 182 horsepower (136 kW) of total system power.

Chevy bringing Spark RS Concept to SEMA

Well, the SEMA mess has well and truly begun. Every year, an increasing number of automakers flock to the Las Vegas auto show, bringing accessories and concept vehicles that are both awesome as well as occasionally questionable. Chevy will bring an RS concept of the new Spark to SEMA, signaling that its styling package will be applied to the brand's smallest vehicle in the near future. We can expect the usual stuff in a production Spark RS – larger wheels, a slightly sportier cabin, a more aggressive body kit, and a small drop in ride height – but for the concept, Chevy wasn't restrained by things like budget. The front splitter, and sill extensions, foglight surrounds, and rear bumper insert are all finished in carbon fiber. The 17-inch alloys are apparently inspired by the Corvette Z06's Z07 package, while the Dark Liquid Switchblade Silver paint is broken up only by a driver's-side stripe. The company is also using SEMA to show its new Red Line accessories, features both concept and production parts for the Trax, Camaro, Malibu, Colorado, and Sierra. Every vehicle gets Enhanced Silver Metallic paint, a charcoal finish on the roof, satin graphite/red graphics, black/red badge kits, and aside from the Colorado, tinted lamps. Individual mods for the Trax include relatively simple tweaks, including new 18-inch wheels, blacked-out bowtie badges, a lowered ride height, and custom badging. It's a similar story on the Malibu, except that its 19-inch wheels are a smidge larger, and its lowered ride height is the result of a concept kit. The first concept based on the new Camaro opts for 20-inch wheels, while adding a few more performance items. The ride height has been lowered, there's a new air intake system, and an upgraded brake package. Chevy has also replaced the front upper and lower grilles inserts with red accents. On the pickup side of the coin, the Colorado gets 18-inch wheels, new intake and exhaust systems, Goodyear Wrangler Fortitude tires, and flared wheelarches. The Silverado gets similar intake and exhaust upgrades, as well as the largest wheels of them all, with 22s at all four corners. The full-size truck also gets a Brembo brake package, while every vehicle, aside from the Camaro, gets Thule roof-mounted accessories. You can check out all six concepts in the gallery above, and then be sure to keep an eye open for live images from the floor of the 2015 SEMA show, slated to open next month.

GM to build next-gen Chevy Cruze in Mexico

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.