1976 Chevrolet C10 Custom Deluxe Standard Cab Pickup 2-door 5.7l on 2040-cars
Claymont, Delaware, United States
Body Type:Standard Cab Pickup
Engine:5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
Interior Color: Brown
Make: Chevrolet
Number of Cylinders: 8
Model: C10
Trim: Custom Deluxe Standard Cab Pickup 2-Door
Warranty: power steering
Drive Type: RWD
Mileage: 131,101
Exterior Color: Orange
New motor with 6,000 miles on it. Having trouble with leaking oil and trans problems. There is a dent on the passenger side on the bed. Interior molding missing. Seats have holes in them. The radio does not work. Equipped with bed liner. Had for 6 years and it was trusty and we had our ups and downs. I can't afford to take care of it anymore and would like to get her into good hands. Definitely a project vehicle. Will need trailer to haul away. Clean title. I purchased from a used car lot. Would be great if buyer could pay in cash or cashiers check.
Chevrolet C-10 for Sale
Pro stock chevy custom 454/400 turbo tubbed and chopped 1978 chevrolet pickup(US $9,900.00)
Pickup,truck,other,1500,rat rod,street rod,standard,custom,cheyenne
1961 chevrolet pickup
1985 chevrolet c10 silverado 4x4 pickup truck
1983 chevrolet c10 swb blue truck 83 chevy silverado fully restored 383 stroker
1969 chevrolet c10 403 custom truck
Auto Services in Delaware
White Auto Rental Inc ★★★★★
Pardo`s Automotive ★★★★★
Kia of West Chester ★★★★★
Kelly`s Collision ★★★★★
Jay & Pete`s Auto Repair ★★★★★
Goodeal Lifetime Transmissions ★★★★★
Auto blog
Corvette Stingray gets optional Z06 components
Thu, Nov 5 2015If you've got a Corvette Stingray in the garage and have been tempted by some of the upgrades incorporated into the Z06, but can't quite bring yourself to trade up, Chevy has got some good news for you. The Bowtie brand has announced a series of performance parts derived from those in the Z06, but applicable to the base Stingray. The list of parts includes new cooling elements, prop shafts, brakes, suspension components, and underbody braces. They can all be fitted to Stingray models with or without the Z51 performance kit, and promise to raise the Corvette's game if not quite to Z06 levels, then closer to them. And for Z06 owners interested in gaining a bit more advantage, Chevy is offering a new Level 3 aero kit as well. The parts were demonstrated on upgraded 'Vettes at the Ron Fellows driving school at Spring Mountain. The school is also serving as technical partner and the track as the location for a new spec racing series built around the C7 Corvette. Dubbed the Michelin Corvette Challenge, the calendar is composed of fifteen half-hour races held in pairs over eight weekends, all on the six-mile circuit near Las Vegas. The cars to be used in the series will be close to showroom stock and feature many of the new Z06-derived upgrades, with Michelin racing slicks for dry weather and Pilot Super Sport tires in the wet. Perhaps most compelling of all will be the payment plan that will allow participating amateur racers to pay in installments across the season and take home their Corvette after the season's conclusion in December. New Z06 Parts Enhance Corvette Stingray Performance Broad range of chassis, suspension and aero components enhance capability 2015-11-02 PAHRUMP, Nev. – Chevrolet today and drivers from the Ron Fellows Corvette high-performance driving school at the Spring Mountain track demonstrated Stingray models enhanced with components from a new lineup of Z06-based performance parts. They're designed for 2014+ Stingray models, including Z51-equipped cars. "We've selected specific components from the Corvette Z06 and engineered them to fit the award-winning Stingray," said Jim Campbell, Chevrolet U.S. vice president of Performance Vehicles and Motorsports. "These Z06 parts enhance the handling, braking, cooling and downforce performance of the Stingray." Ron Fellows, champion Corvette Racing driver, collaborated with Chevrolet Performance engineers on the all-new portfolio.
GM recalls 64k 2011-2013 Volts over carbon monoxide fears, stop sale on Trax and Encore
Thu, Mar 12 2015General Motors is recalling 50,249 Chevrolet Volts from the 2011-2013 model years in the US and an additional 13,937 exported examples because of fears over carbon monoxide buildup. According to a statement, if a Volt is accidentally left on while running on electric power, its internal combustion engine would eventually kick on to charge on the battery. If this happens in an enclosed space, then carbon monoxide can fill the area, leading to a potential exposure to the dangerous gas. According to GM, there have been two injuries reported due to this issue. To fix the problem, there's a software update to limit the time the vehicle can idle. According to Automotive News, GM is also issuing a stop sale on about 2,300 examples of the 2015 Chevrolet Trax and Buick Encore. In these compact crossovers, it's possible that the steering column assembly could touch the power steering circuit board and cause damage over time. This could potentially cause the system to stop working. Automotive News indicates that the automaker is still working with the supplier to get the necessary parts to repair this problem. General Motors is recalling 50,249 Chevrolet Volts in the U.S. from the 2011-2013 model years to implement a software update that will limit the amount of time a vehicle can be left idling in the "on" or "run" position. If a driver exits the vehicle and inadvertently leaves the vehicle "on" by failing to react to cues and warning chimes emitted by the vehicle, the vehicle's high-voltage battery will drain after a period of time and the gasoline engine will begin to run. If the gas engine runs for a long period of time within an enclosed space, such as a garage, carbon monoxide could build up. GM is aware of two injuries, both related to carbon monoxide build up. The total recall population including Canada and exports is 64,186. Related Video:
Chevy confirms 2016 Camaro will have wheels, brakes
Thu, Apr 9 2015Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.


