1967 Chevrolet C-10 Pick-up on 2040-cars

Auto blog

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

Before Chevrolet's Redline, there was the Saturn Red Line

While Chevy rolls out Redline special editions across more of the lineup at this year's Chicago Auto Show, we've been eating some 'member berries and started thinking about the last time GM used the term. Back in 2004, Saturn rolled out Red Line (two words) editions of the Ion and Vue. The lineup was joined by the Sky Red Line in 2007, and the second-generation Vue kept the tradition going in 2008. This was in the heady days of the mid-2000s, before the financial crisis and GM's bankruptcy reorganization that saw the end of Saturn. The press release headline for the 2008 Sky is now cringe-worthy: "Hot-selling Sky helps drive Saturn product renaissance." Performance lineups were the hot new thing, as automakers attempted to cash in on the tuner trend popularized by The Fast and the Furious. Chevy had SS models, Pontiac had GXP, and Saturn had Red Line. Across the Detroit Metro area, Dodge had a slew of SRT models, and Ford's Special Vehicle Team brought us the SVT Lightning pickup, the SVT Focus, and a smattering of hopped-up Mustangs. The performance cred of Red Line models varied from car to car. The Ion Red Line shared the same engine as the original Chevy Cobalt SS, a 205-horsepower supercharged 2.0-liter four-cylinder, 65 hp more than stock. Car and Driver tested one with a 0-to-60-mph time of 6.1 seconds and said the Ion "tears down the wall that has separated enthusiasts from the Saturn brand for so long." The Vue Red Line, meanwhile, came with the same optional Honda-sourced 3.5-liter V6 you could get in the regular Vue, and added a stiffer, lower suspension, bigger wheels with more aggressive rubber, and recalibrated steering assist. When the Vue was redesigned for the 2008 model year, the Vue Red Line was a similar proposition. The engine was now from GM, and up 7 horsepower to 257, but you could get it in both Red Line and XE trim. Aside from the tire and suspension upgrades, Red Line models now came with a unique front fascia and rear exhaust cutouts. The most exciting Red Line, of course, was the high-performance version of the Sky roadster, which shared underpinnings with its Pontiac Solstice twin. This model came with GM's hot 2.0-liter Ecotec Turbo, good for 260 horsepower. The extra power was crucial in covering up the Sky's unfortunate manual gearbox ratios, which left the non-turbo model aching for torque in lower gears. As we all know, Saturn was taken by the grim reaper in 2009 after an attempt to sell the brand to the Penske Group.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.