Find or Sell Used Cars, Trucks, and SUVs in USA

1964 Chevy C10 Project With Big Back Window on 2040-cars

Year:1964 Mileage:1
Location:

Kennesaw, Georgia, United States

Kennesaw, Georgia, United States
Advertising:
Transmission:3 speed
Body Type:regular cab
Vehicle Title:Clear
Engine:283 v8
Year: 1964
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: base
Options: Leather Seats
Drive Type: 2wd
Mileage: 1
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"I have a 1964 lwb C10. Its got a 283 v8, 3 speed transmission, and it runs and shifts very well. I also have a sand blasted swb c10 frame that has the front axle, disk brakes, suspension, and the rear axle with drum brakes and complete suspension (minus shocks). It is a project. It needs rust repair in the cab, i.e floor pans, and cab corners, and alot of cosmetic work. Mechanically, it is sound with the exception of the brakes, hence the frame with new brakes. Body is straight on the outside, with little to no rust outside the cab. I NEED IT GONE ASAP. That does not mean ill take 2000 for it so dont low ball me. Serious inquires only. Again, this is a project, and is not currently a daily driver. Offer me a price closer to my asking and I will consider delivering, otherwise, you need to figure out a way to get it home."

I have a 1964 lwb C10. Its got a 283 v8, 3 speed transmission, and it runs and shifts very well. I also have a sand blasted swb c10 frame that has the front axle, disk brakes, suspension, and the rear axle with drum brakes and complete suspension (minus shocks). It is a project. It needs rust repair in the cab, i.e floor pans, and cab corners, and alot of cosmetic work. Mechanically, it is sound with the exception of the brakes, hence the frame with new brakes. Body is straight on the outside, with little to no rust outside the cab. I NEED IT GONE ASAP. That does not mean ill take 2000 for it so dont low ball me. Serious inquires only. Again, this is a project, and is not currently a daily driver. Offer me a price closer to my asking and I will consider delivering, otherwise, you need to figure out a way to get it home. Call or text me for more information: 4 zero 4 680 4559.

Auto Services in Georgia

World Toyota ★★★★★

New Car Dealers
Address: 3310 Laventure Dr, Atlanta
Phone: (770) 457-3391

Watson/Boyd Auto Repair ★★★★★

Auto Repair & Service
Address: 2900 E 46th St, Chickamauga
Phone: (423) 355-2958

Trantham`s Service Center & Wrecker Service ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 6733 Ringgold Rd, Fort-Oglethorpe
Phone: (423) 702-4859

Thomson Automotive Parts ★★★★★

Automobile Parts & Supplies, Automobile Accessories
Address: 223 Black St, Norwood
Phone: (706) 595-3477

Suwanee Park Auto Service ★★★★★

Auto Repair & Service, New Car Dealers
Address: 3963 Lawrenceville Suwanee Rd, Suwanee
Phone: (770) 932-1599

Summit Racing Equipment ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 20 King Mill Rd, Avondale-Est
Phone: (770) 288-3200

Auto blog

GM, UAW poaching Nissan workers in Tennessee

Tue, Sep 8 2015

General Motors and the United Auto Workers are going on a recruitment drive at the Spring Hill factory in Tennessee, and they're hoping to poach some skilled workers from Nissan's nearby plant in Smyrna, TN. The General and the union even bought a billboard advertising for industrial electricians near the Japanese automaker's facility, according to the Daily News Journal. The reason for the billboard was simple. "GM was short of electricians," said Tim Stannard, the president of the UAW local at Spring Hill, to the Daily News Journal. The factory currently builds the Chevrolet Equinox but has a contract to assemble the next generation of Ecotec engines and the Cadillac XT5, which replaces the SRX. Thanks to the $185-million deal, employment there is expected to double by May 2016, according to Stannard, with roughly 1,800 additional union jobs. Beyond just several billboards, GM has job postings online for the Spring Hill plant looking for workers with specific skills. There has already been some interest in the positions among Nissan employees, Stannard indicated. According to a recent study by the Center for Automotive Research, the average GM worker currently makes $58 an hour, including benefits. Comparatively, Nissan pays an average of $42 an hour with benefits. The General's number could change in the coming weeks because its contract with the UAW is about to expire, and higher wages are among the major negotiating points.

Fullsize GM SUVs have a problem that's making owners sick

Thu, Dec 31 2015

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.

GM struggles to sell small cars, plans to lay off 2,084 employees at two plants

Thu, Nov 10 2016

Due to low demand for some of its vehicles, General Motors plans to cut 2,084 jobs at its assembly plants in Lordstown, OH and Lansing, MI. At the same time, the automaker also announced plans to invest approximately $900 million in three of its facilities – the Toledo Transmission Operations in Ohio, Bedford Casting Operations in Indiana, and Lansing Grand River in Michigan - for future products. GM will discontinue the third shift at both the Lansing Grand River plant and the Lordstown, OH plant. The Cadillac ATS, Cadillac CTS, and Chevrolet Camaro are made at the automaker's plant in Michigan, which currently has 2,700 employees. The move to eliminate the third shift affects 810 hourly workers, as well as 29 salaried employees, starting on January 16th. The plant in Lordstown, OH currently has 4,500 employees and makes the Chevrolet Cruze sedan. The plan to discontinue the third shift will affect 43 salaried workers and 1,202 hourly employees and will start on January 23rd. As Fortune points out, sales of the Cruze are down 20 percent through October, while sales of the Cadillac ATS and CTS were down 17 percent through the same period of time. In addition to cutting the third shift at both assembly plants, the automaker plans to invest a total of $900 million between three of its facilities for unnamed future products. GM's Toledo Transmission Operations will receive $667.6 million, the Lansing Grand River Assembly plant will receive $211 million, and the automaker's Bedford Casting Operations will get $37 million. Last year, GM cut roughly 500 jobs from its Orion Township factory due to slow sales of the Chevrolet Sonic and Buick Verano, with surging crossover and SUV sales as the most likely culprit. With GM posting much healthier sales figures for the Chevrolet Equinox and Cadillac XT5 compared to the ATS, CTS, and Cruze, it looks like compact SUVs are to blame for this year's layoffs as well. Related Video: News Source: Fortune, General MotorsImage Credit: REUTERS / Rebecca Cook Hirings/Firings/Layoffs Plants/Manufacturing Cadillac Chevrolet GM Coupe Sedan Lordstown Ohio