1957 Chevy 2dr Sedan on 2040-cars

Auto blog

400,000 Chevy, GMC pickups recalled: Side airbags can explode

DETROIT — General Motors is recalling more than 400,000 pickup trucks in the U.S. because the side airbags can explode without warning and spew parts into the cabin. The recall covers certain 2015 and 2016 Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 trucks. Documents posted Friday by U.S. safety regulators say the airbag inflator can rupture or the end cap can fly off on both sides of the trucks. Documents say three inflators ruptured in 2015 Silverados last month, one in Florida and two in Texas. All three trucks were unoccupied at the time, and GM says it has no reports of injuries. Dealers will replace both side airbag modules. The company says it has a limited number of replacement parts available. Owners will be notified starting Aug. 16 and they'll get a second letter when parts are widely available. About 9,000 of the trucks were recalled last year for the same problem. The company says a manufacturing defect allowed moisture into the inflator while it was being manufactured, causing corrosion. The inflators were made in Mexico by Joyson Safety Systems, the company that took over Takata. Back in April, Silverado and Sierra were among nearly 750,000 GM vehicles in a National Highway Traffic Safety Administration (NHTSA) investigation into non-deploying driver-side airbags. That investigation is ongoing. Takata is responsible for the largest recalls in automotive history, covering about 100 million inflators among 19 major automakers worldwide, including about 67 million inflators in the United States. Nineteen deaths in the U.S. have been attributed to Takata inflators. Only about 50 million of the 67 million recalled inflators in the U.S. have been repaired. This latest recall is a good reminder to go to NHTSA's recalls website and enter your car's VIN. Millions of recalled vehicles still pose a danger to their owners. Yours could be one of them.   Recalls Chevrolet GM GMC airbag Takata airbag recall

Sunday Drive: Spying an automotive future of performance

I spy, with my little eye ... the future of the automotive world here in the United States. That pretty much sums up this week's Sunday Drive, in which we pull out the most popular stories on Autoblog of the previous week and try to draw some sort of conclusion as to what binds them all together. This week, it's spy shots, starting with one of the biggest and baddest muscle cars the world has ever seen: the Dodge Challenger Hellcat. The Hellish coupe gets a new hood for 2019 with dual scoops, but that's about the only meaningful change for the new model year. No matter. As long as it's packing 700-plus horsepower under those two hood scoops, all will be right with the world. Moving on, we take keep the performance angle but move it from the street to the dirt with a new version of the Chevy Colorado ZR2 that we think is probably called the Bison. We think it'll keep the high-tech suspension bits of the regular ZR2, but add expedition gear that may include a snorkel and a winch. Which, if true, is pretty dang cool. Keeping the truck theme is the 2019 GMC Sierra. There's nothing particularly noteworthy about the trim level in which the truck was spied, and that's what makes this specific example interesting. Base-model trucks almost never get much attention, but they sell in droves to workers who need an honest-to-goodness truck for work or play and don't care about bells, whistles, or massive chrome badges. And finally we have the 2018 Jeep Wrangler, which is on fire on the sales floor right now. But those are all V6-powered Wranglers flying off the showroom floor. Soon, a turbocharged four-cylinder engine option will become available, and now we know that it will return up to 23 miles per gallon in the city and 25 on the highway. That makes it the most fuel efficient Wrangler that Jeep has ever sold. As always, stay tuned to Autoblog this week for all the automotive news that's fit to publish. 2019 Dodge Challenger Hellcat with twin-scoop hood spied with no camouflage Chevy Colorado ZR2 Bison caught testing 2019 GMC Sierra 1500 spied in base trim level 2018 Jeep Wrangler four-cylinder fuel economy revealed Spy Photos Chevrolet Dodge GMC Jeep Truck Coupe SUV Off-Road Vehicles Performance dodge challenger srt hellcat sunday drive

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.