1957 Chevy 2 Door Hardtop,complete Car,runs And Drives,1 Piece California Frame on 2040-cars

Auto blog

Regular-cab, short-bed Chevy Silverado Trail Boss pickup looks great

For all the wild popularity of full-size pickups, there's one configuration that U.S. buyers are no longer offered: the regular-cab, short-bed truck. Interestingly, however, GM still does make this configuration, and both the Chevrolet Silverado and the GMC Sierra are offered with it — in the Mexican market. That body style, however, is available solely in ultra-basic work-truck form. But a custom wheel shop, JC Wheels in the Mexican city of Culiacan, has converted one of these Silverados to Trail Boss trim, and we're digging the result. The sporty shorty Silverado Trail Boss comes to our attention via GM Authority, after the shop posted it on their Instagram feed. The shop added a 3-inch lift, assist steps, Chevy alloy wheels, a Trail Boss front fascia including red tow hooks, and Trail Boss badging. They also added dark window tint, which seems like a good idea in sunny Mexico. In the U.S., the Silverado Trail Boss isn't offered at all in regular-cab form; it only can be had as a double cab or a crew cab, the latter with a choice of a short bed or standard bed. But size is often a hindrance for trucks that actually get driven on trails, where this regular-cab, short-bed variant's smaller wheelbase would be an advantage. Beyond that, the Trail Boss upgrades keep this configuration from looking like a basic-spec machine. That's even more true of the same outfit's previous efforts: the conversion of the GMC Sierra regular-cab, short-bed pickup into a Denali. With so many buyers choosing pickups as personal-use vehicles, it's not hard to think that this configuration could find an audience here. But the key would be to do as this Mexican firm has done and offer it in the desirable off-road and luxury trims, rather than as a basic work truck. Would you buy one? Sound off in the comments below. The next step would be to use this configuration as the basis of a full-size, two-door SUV, in the mold of the classic Chevy K5 Blazer and GMC Jimmy.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.