2004 Xlr on 2040-cars

Auto blog

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.

Lego's 18.5-inch Ghostbusters Ecto-1 will make you feel like bustin'

If there's something strange in your neighborhood, Lego has something to help you take care of those non-terminal repeating phantasms or class-five full-roaming vapors. This week, it announced a supremely detailed version of the Ecto-1, the iconic 1959 Cadillac Miller-Meteor ambulance from the 1984 film classic, Ghostbusters. The set is comprised of a whopping 2,352 Lego pieces and when completed, will measure 18.5 inches long. It's one of the more accurate Lego vehicles the company has created, and features a steering box connecting the steering wheel to the front wheels, hinged doors and an opening hood with replica V8 engine inside. Like the movie car, it's packed with ghost-fighting gadgetry. There's a rotating ghost-sniffer activated by the wheels, a gunner seat that deploys from one of the rear doors, and a roof rack stacked with loads of spirit-trapping gear. Lego says it's even got some easter eggs that will be discovered as the kit is assembled. Lego says that two automotive pieces were developed specifically for the Ecto-1: a 6x14 curved windscreen and a five-module steering wheel. These should translate well to other vehicles in the future or for custom builds. Notably, this kit was designed by the Michael Psiaki, who created Lego's James Bond Aston Martin DB5 kit. The set is released as a tie-in with the upcoming Ghostbusters: Afterlife movie. It was supposed to be released this summer but was delayed until (as of now) June 2021 as a result of the COVID-19 pandemic. As for the Ecto-1 kit, it will hit shelves Nov. 15 just in time for holiday shopping.

Cadillac to expand V-Series but discontinue CTS-V and ATS-V

Cadillac said Tuesday it will expand its V-Series performance sub-brand with the arrival of the CT6-V sedan in 2019 ( formerly known as the CT6 V-Sport), with plans to add high-performance variants across its portfolio. The flipside to that expansion is the sunsetting of its two existing V-Series performance cars, the ATS-V (both coupe and convertible) and CTS-V sedan. Two new unspecified sedans will slot below the CT6 in Cadillac's lineup, a spokesman said. The CT6-V will arrive next spring, roughly a year after it bowed at the New York auto show. It will feature Cadillac's new "Blackwing" V8, a twin-turbo engine that displaces 4.2 liters and produces an estimated 550 horsepower and 627 pound-feet of torque, sending it through GM's new 10-speed automatic transmission to drive all four wheels. A less-aggressive version of the engine will also appear in the CT6 Platinum model, offering 500 horsepower and 553 lb-ft of torque. "Beginning with the debut of the CTS-V Sedan in 2004, the V-Series sub-brand sparked new life into Cadillac," Mark Reuss, executive vice president and president of GM Global Automotive Group and Cadillac, said in a statement. "As a result of the overwhelming response the CT6 V-Sport received when revealed in early 2018, we've decided to formally make it a V-Series, signaling the expansion of V-Series." View 61 Photos A Cadillac spokesman tells Autoblog the 2019 model year will be the last for the ATS-V and CTS-V. The ATS-V is powered by a twin-turbo 3.6-liter V6 that's good for 464 hp and 445 lb-ft of torque, an increase of 262 hp and 173 lb-ft from the base, four-cylinder ATS, which is also set to go to pasture at the end of the 2018 model year. The CTS-V, meanwhile, boasts a 6.2-liter supercharged V8 under its carbon-fiber hood that puts out 640 horsepower and 630 pound-feet of torque, good for a 3.7-second 0-60 mph time and a top speed of 200 mph. In a Quick Spin review last year, Autoblog Editor-in-Chief Greg Migliore called the car "old-school muscle in an Esquire-approved suit. It's 'roids and cufflinks." As for what's next for an expanded V-Series, Cadillac has the new XT4 crossover, and already other companies are banking on performance versions of crossovers. Cadillac's also developing a less expensive luxury sports sedan called the CT5. It's also said to be planning a production version of the Escala concept starting in late 2021, so those could be possibilities.