2002 Cadillac Seville Sls Low Miles on 2040-cars

Auto blog

2020 Cadillac CT5-V, CT4-V to be revealed next week

Even though the ATS-V and CTS-V are on the way out, the future is looking bright for Cadillac's high-performance sub-brand. Why is that? Well we're going to see not one, but two all-new V models on May 30. The company revealed its plans to show the 2020 Cadillac CT5-V and the CT4-V in an announcement about 15 years of the V brand. Not much is known about either car, but both should be wickedly quick based on their predecessors. We're particularly curious as to what engines will be used. With the CT5-V, a return of a supercharged pushrod V8 seems possible considering the CT5 is based on the Alpha platform that also underpins the Camaro. But Cadillac may want to push its more unique powertrains such as the twin-turbo, double-overhead-cam 4.2-liter V8 in the CT6-V. In the CT6-V, it makes 550 horsepower and 627 pound-feet of torque. Cadillac's former CEO said that other cars getting the engine will have it 500 horsepower and 553 pound-feet of torque. We think the company could get away with the full power in the CT5-V, though, since each car's mission and character is different. There's also a slim chance we could see a return of the manual transmission for the midsize sports sedan, based on what a Cadillac engineer said. As for the CT4-V, there are more questions, simply because we haven't even seen the regular version yet except in spy shots. Since the CT5 is built off the Alpha platform, it seems reasonable to think the CT4 will do the same, especially since the ATS also used the platform. And to leave space between the CT5-V and itself, using a hot version of the twin-turbo 3.0-liter V6 seems like the most likely choice. The hot V6 in the ATS-V made 464 horsepower and 445 pound-feet of torque, so we would expect the same. Hopefully Cadillac will offer a manual with it again. One final note from the Cadillac V announcement also got our attention. It said that these two cars are "just the beginning." That seems a pretty obvious sign there are other V models in the works. Since the CT4 and CT5 will round out the company's car line, the logical next choice would probably be crossovers. It will be interesting to see what an XT4-V or XT5-V will be like, especially since they use front-drive platforms. But in the meantime, we'll look forward to Cadillac's hot sedans.

Cadillac Celestiq flagship EV shows off its tint-shifting smart roof

GM has high hopes for its upcoming Cadillac Celestiq sedan, slated for release in 2023. The flagship EV is being built to help the brand recapture its reign as “the Standard of the World.” As such, itÂ’s expected to arrive packed to the gills with cutting edge, futuristic technology including an all-glass roof that can adjust its opacity anywhere between crystal clear and completely opaque with the mere flick of a switch. These roofs, dubbed SPD-Smartglass, have been designed and manufactured by Research Frontiers of Woodbury, New York, and are based on Suspended Particle Device technology that was originally created as a replacement for the manual sliding window shades aboard commercial aircraft, Research Frontiers CEO Joe Harary told Engadget. Some of the earliest examples of SPD window treatments can be seen on the 2011 Mercedes Benz SLK roadster and in the 2012 Mercedes S Class coupe, which were used to increase headspace while eliminating the physical window shade screens, as well as various McLaren models over the past decade. As the YouTube video below explains, Research Frontiers SPD tech relies on polyiodide nanoparticles to generate its tint effect. Magic Sky Control Using SPD-SmartGlass Technology “SPD technology is smart glass that allows you to change the tint of the glass,” Harary explained. “There's this film that we invented that has little nanoparticles in it, which you can control with a small electrical voltage. So, basically this film... that allows you to dial in whatever tint level you'd like.”  “The crystals are about three to five tenths of a micron in length and they act as induced dipoles so when you apply an electric field to conductive coatings in the film,” Harary continued, “ the particles will line up, and allow light to pass through. Then, when you remove the voltage, their natural tendency is to be in the dark state due to Brownian movement and that causes the glass to tint.”  As the tint partially blocks incoming photons, it also reduces the amount of glare experienced by the driver and the heat trapped within the vehicle — over 99.5 percent of light and 95 percent of heat, per a January press release from the company. The claim is, this allows vehicle occupants to stay comfortable for longer without having to turn on the A/C, as well as keep the interior up to 18 degrees Fahrenheit cooler overall, Harary said.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.