1980 Cadillac Seville Diesel - Very Good Body & Interior on 2040-cars

Auto blog

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.

2017 Cadillac XT5 cuts weight, adds room over SRX [UPDATE]

UPDATE: This post has been updated with a full set of official photos. Impressions on the interior and exterior have also been added. The attention of Cadillac fans may be focused on the new CT6 sedan, but the most important new vehicle in the New York-based company's quiver might be the all-new XT5. Cadillac officially unveiled the SRX replacement today ahead of its full debut in Los Angeles next week. Short for Crossover Touring 5, the new XT5 drops 278 pounds over the old SRX, while offering an extra 3.2 inches of interior space. The XT5's face balances the best parts of the Escalade and CT6's fascias, with a strong egg-crate grille and prominent LED accent lights. It looks good scaled to a vehicle of this size. The taillights curve up and over the rear haunches, which feed into a strong shoulder line that runs towards the front of the car. It's a solid look, and one we're looking forward to seeing in person. The interior looks very, very nice, with warm leather and wood trimmings. The steering wheel, with its large, central wood accent, looks remarkably good. In fact, it might be one of our favor parts, if only because it's such a bold piece of design. We aren't crazy about the sheer abundance of buttons on the wheel, though. All four spokes are covered, and it just looks kind of cluttered. As is the trend nowadays, the center console features a floating bridge design with plenty of storage space underneath. Our early impression of the leather-wrapped dash is positive, although as is so often the case, we need to get a hands on before rendering a final judgment. There are no major surprises under the hood. Like the current SRX, the XT5 utilizes the same 3.6-liter V6 as the CTS and ATS sedans. Start/stop has been fitted, which should provide a boost in fuel economy although no mileage figures have been published yet. Cadillac will also offer a standard 2.0-liter turbocharged four-cylinder XT5, although for reasons that aren't clear, it's only for the Chinese market. This seems like a misstep in our eyes, considering the XT5 will challenge the likes of the BMW X3, Audi Q5, and Mercedes-Benz GLC – all of which offer four-cylinder turbos. With the V6, the XT5 delivers 310 horsepower and 270 pound-feet of torque. While there's more total horsepower than the Lexus, Audi, or BMW, the 3.6 still faces a torque deficiency versus the turbocharged X3 xDrive35i or supercharged Audi V6. The XT5 has a standard eight-speed automatic transmission.

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.