Cadillac Series 62 Sedanette Fastback, page #13

Auto blog

GM alerting truck and sedan owners to a do-over on brake recall

A recall campaign intended to address issues with braking systems on certain 2019 General Motors trucks and sedans may have introduced a new issue, the automaker has acknowledged, and thousands of owners driving repaired vehicles may need to return to their service departments for another update.  The update addresses a fix that was pushed out to owners of more than half a million brand-new GM trucks and sedans that could potentially lose partial braking function, according to the Detroit Free Press. The original software fix helped address situations where the vehicles' anti-lock braking systems would become disabled, which in turn would prevent electronic stability control from activating. Vehicles subject to the recall would often experience software glitches that prevented them from properly communicating the operational state of these systems, meaning drivers would have no idea that their brakes may not behave as expected in an emergency. The 2019 Chevrolet Silverado 1500, Cadillac CT6, and GMC Sierra 1500 were all recalled in the original campaign.  Unfortunately, the early version of this fix appears to have introduced yet another software glitch, indicating that the original fix did not do the trick. Those who have not yet had their cars serviced can rest easy; they will only receive the most up-to-date version of the software fix.  Related video    

2021 Cadillac Escalade will get next-gen Super Cruise with auto lane-change

Super Cruise is getting its first big update since it was originally launched on the 2018 CT6 sedan. As that large car fades away, this new version of Super Cruise will be coming online in the 2021 CT5, CT4 and … the 2021 Escalade! Yes, ladies and gents, Cadillac is finally applying its advanced driver assistant to the iconic Escalade. The biggest change to this version of Super Cruise is a new feature called “Lane Change on Demand.” When Super Cruise is engaged, the driver can tap the turn stalk, and the car will execute a hands-free lane change if itÂ’s safe to do so. This kind of lane-change functionality is similar to that offered by other manufacturers' systems (i.e. Mercedes-Benz, Tesla, BMW). However, like the rest of Super Cruise, the car is able to complete the task with the driverÂ’s hands completely off the steering wheel so long as the driver monitor can tell that youÂ’re paying attention. Further improvements abound. “This is our most extensive update weÂ’ve made to Super Cruise since its debut,” said Mario Maiorana, Super Cruise chief engineer. “We have made a number of improvements to make Super Cruise more intuitive, better performing and more accessible for our customers. In addition to the automated lane change functionality, weÂ’ve made improvements to the user interface and hands-free driving dynamics.” Cadillac says that it has gathered richer map information to make the lane change function possible and also to make turns and highway interchanges smoother. The software was also improved with the aim of gaining “better steering and speed control.” Cadillac also made the system easier to engage. It did this by allowing the operator to switch the Super Cruise system on, and then get the vehicle in a proper lane position — it automatically activates once the vehicle is positioned. Previously, the driver had to get the vehicle centered in the lane properly, and then you were allowed to switch the system on. The auto lane changing function operates similarly to other systems like it. When driving, you can either tap or fully depress the turn signal stalk. The car then looks for an acceptable opening in the indicated lane. Once found, the car begins its lane change. Within the gauge cluster, there are animations that keep the driver apprised of the lane change at all times. Once the vehicle has moved into the new lane, itÂ’ll shut the turn signal off and continue driving along.

GM's Cruise Origin EV platform to be shared by many electric vehicles

GM on Monday announced that it was spending $2.2 billion at its Detroit-Hamtramck facility, part of its $3 billion commitment made after the UAW strike to transform Hamtramck into the company's first plant to exclusively build a wide variety of electric and autonomous vehicles. The operation will eventually employ 2,225 people. Hamtramck is still building the Cadillac CT6 and Chevy Impala. Production of those cars will wind down Feb. 28, when GM will idle the lines for 18 months of retooling. During the transition, more than 800 workers will likely be transferred to build pickups at Fort Wayne, Indiana, or Flint, Michigan. When Hamtramck production of new EVs begins in late 2021, the Cruise Origin electric shuttle revealed last week will be among the first vehicles built there. Also, an electric pickup likely branded as a Hummer to be sold as a GMC, which will be debuted by LeBron James during the Super Bowl this Sunday. GM made quite a few pronouncements during the unveiling of the electric, autonomous Cruise Origin last week in San Francisco. We heard that the Origin was designed to last for for 1 million miles, be "roughly half the cost of what a conventional electric SUV costs today,” and riders could save as much as $5,000 per year by giving up their cars for Origins. Much was left out, as well, such as detailed specs on the platform, and when the Origin could see wide deployment. Carscoops addressed one open question about the platform, reporting that the Origin's bones will be shared among a number of other GM battery-electric vehicles, probably starting with the Cadillac EV due in 2021. The site received confirmation of that tidbit from Megan Soule, the automaker's assistant manager of Electrification, Battery Technology, Fuel Cells, R&D and GM Ventures Communications. It seems what we've been shown in the Origin is the first fruit of the multi-vehicle EV strategy GM CEO Marry Barra presented at the 2017 Barclays Global Automotive Conference. One of the slides (below, full PDF presentation here) touts an "All new multi-brand, multi-segment platform" with a "Structurally integrated all new battery system." The next slide places that modular platform at the center of 11 new vehicles, the van-looking silhouette on the upper right labeled "SAV," for shared autonomous vehicle, apparently in reference to the Origin.

Hottest Cadillac CT4-V and CT5-V rumored to offer manual transmissions

We recently received one large detail to fill in the picture of the hottest versions of the Cadillac CT4-V and CT5-V, the sedans maybe or maybe not called Blackwing. As you know, due to a platform switch caused by cost cutting at parent GM, the 4.2-liter twin-turbo Blackwing V8 won't figure in the equation because it won't fit in the engine bay of either sedan. The new, gone-too-soon engine is too wide and too tall. The hottest V models will turn to stalwarts in the range, the CT4-V appearing to get the 3.6-liter twin-turbo V6 used in the departed ATS-V, the CT5-V working with the 6.2-liter supercharged V8 also put to use in the Chevrolet Camaro ZL1 and C7 Corvette Z06. But all of this could mean good news for three-pedal enthusiasts; both engines have been paired with manual transmissions previously, and Muscle Cars & Trucks says both of the coming flagship V models will get manual transmissions. We've expected a manual in the CT4-V. Not only did GM President Mark Reuss say, "Cadillac will make manuals in V-Series" during the launch of the milder V variants, but spy video of the CT4-V from last summer captured a camouflaged CT4-V looking and acting like a car with a manual gearbox. However, no one surmised that the CT5-V would get a manual, too. None of the bigger sedan's competition is sold with a stick shift, and the retired CTS-V with the same 6.2-liter supercharged V8 was only sold with an eight-speed automatic, while just one aisle over the Camaro ZL1 offered a six-speed manual and the Corvette Z06 a seven-speed manual. The last time Cadillac put a row-your-own in the midsize luxury scorcher was the second-gen CTS-V — the one that came in a wagon bodystyle, too — which paired a supercharged LS9 V8 derived from the C6 Corvette ZR1 and a six-speed Tremec manual. MCT doesn't cite any sources, so take this as rumor for now. It's possible to read Reuss' statement in line with this rumor, though. The assumption has been that the plural "manuals" referred to multiple stick shifts going into multiple CT4-V sedans, whereas he could have meant there will be two manual-equipped sedans in the V-Series range. We'll hope for the best and see what pops out of the transmission tunnels on both sedans when they debut later this year. Related Video:

2021 Cadillac Escalade teases us with sliver of a design preview

We know the 2021 Cadillac Escalade will be breaking cover on February 4 to join its full-size GM truck compatriots. And now we know Spike Lee will have the honors of introducing the Cadillac at the Oscars through a short film he directed called “Anthem.” Cadillac also took the opportunity to tease the new Escalade's front end with this nugget of a preview. We get to see the grille, headlight and DRL design of the 2021 Escalade, staring daggers through Spike LeeÂ’s back in a studio. The grille is a traditional Escalade look, eschewing the grille design seen on more recent Cadillac SUVs like the XT6 and XT4. It uses larger silver bars that scythe across the front end as opposed to the mesh and speckled black/chrome seen on the Cadillac crossovers. Similar to the XT6, however, it does go with a horizontal main headlight and a vertical DRL. This marks a departure from the vertically-oriented headlights weÂ’re used to seeing on the biggest Cadillac. WeÂ’ll note that the bumper-width lower grille appears to be done in black, but thereÂ’s no shortage of chrome on this EscaladeÂ’s front end. Our best look at the interior is through a grainy video Cadillac teased to us about a month ago. ItÂ’s going to have 38 inches of curved screen, using OLED technology. ThatÂ’s going to be lovely to look at. The front end teased in this photo is plenty fine, too, but weÂ’re not seeing anything thatÂ’ll upset the apple cart from an exterior design perspective yet.

Hotter Cadillac CT5-V could use the CTS-V's 6.2-liter V8

Cadillac is in the final stages of testing the high-performance variant of the CT5, prototypes are racking up miles all over the world, and a recent report sheds light on the engine screaming between its punched-out fenders. It's a V8, to no one's surprise, but it's not the twin-turbocharged, 4.2-liter unit many believed the sedan would use. Sources familiar with Cadillac's product plan told Car & Driver the hotter CT5 — whose name hasn't been revealed yet — will receive an updated version of the supercharged 6.2-liter V8 that powered the mighty CTS-V. It developed 640 horsepower in the firm's last German-bashing super-sedan, though where engineers will peg the CT5's output remains to be seen. It will roast the rear tires through a paddle-shifted automatic transmission. The publication explained Cadillac chose the 6.2-liter because it's more compact than the 4.2-liter Blackwing engine it developed for the CT6. The former features a pushrod design, while the latter gets twin overhead cams that make it taller and wider. The CT5 is a new model, but its Alpha platform is older than Cadillac's newest V8. Cadillac hasn't announced what will power the flagship CT5. The model is tentatively due out in showrooms before the end of 2020, so we expect to learn more about it in the coming months. Seeing it in the metal for the first time during the 2020 Detroit Auto Show in June isn't entirely out of the question. What's next? If the report is accurate, the much-hyped Blackwing may end up being an orphan engine. It was developed specifically for the Cadillac brand, and inaugurated by the CT6-V that recently went out of production. The many rumors claiming General Motors will put the engine in other models to recoup its investment are falling like dominoes. It won't fit in the CT5, so there's no reason to believe it will end up in the smaller CT4; its flagship version will likely arrive with a twin-turbocharged, 3.6-liter V6 borrowed from the ATS-V. An earlier report claims the next-generation Escalade won't use the Blackwing, either, because making it fit would cost too much. Looking beyond Cadillac, the only General Motors-owned brand that could use the Blackwing is Chevrolet, since we can't imagine the GMC Yukon will get it if the Escalade doesn't. The Tahoe/Suburban duo is off the table, too.

2020 Cadillac XT6 Review & Buying Guide | Sneaking in through the back

The 2020 Cadillac XT6 is arriving late to the party, literally decades after some of its rivals. It's a new, three-row luxury crossover that serves as a much-needed, more-modern and less ostentatious family hauler than the Escalade (which is getting overhauled next year, by the way). The question about the XT6, then, is it fashionably late? The XT6 is indeed quite handsome and refined -- we thought it looked particularly excellent in one our test car's Red Horizon Tintcoat. There's a classic sophistication to it that evokes Cadillacs of the 1960s rather than the overwrought and borderline-tacky designs of other eras (including recent ones). We think the exterior design will age quite well, especially in light of some competitors. However, we're also not sure it's distinctly a Cadillac. Worse, the interior is drab, unimaginative, and blighted with unremarkable materials. A Volvo XC90 and Lincoln Aviator instantly look and feel more special, while a range-topping Hyundai Palisade isn't as far behind as the price gap would indicate. The driving experience also leaves something to be desired. Besides the ho-hum engine, the XT6 has neither the sharp handling of Cadillac's recent sedans nor the stately ride comfort one also might expect given the brand's past. Overall, the XT6 sneaks in through the back of the party rather than making a grand entrance; an unremarkable effort in a toughly contested segment. What's new for 2020? The XT6 is an all-new model and fills a gap in Cadillac's lineup. What's the XT6's interior and in-car technology like? Answering this question is all about perspective. In a vacuum, the XT6 interior seems nicely put together, its leather is soft and features are in abundance. The range-topping trim's gold carbon fiber trim is particularly interesting. If you sat in one after a Buick Enclave, the step up would be obvious. However, come from a Lincoln Aviator or Volvo XC90, to cite two excellent examples of the breed, and the difference is stark in terms of design and materials quality (there are too many hard plastics throughout). The XT6 quite simply isn't as cool, isn't as luxurious and doesn't seem to justify its price tag. At least features content is strong with six USB ports, wireless charging, Android Auto, Apple CarPlay and satellite radio all included along with a panoramic sunroof and various driver assistance technologies. Other brands nickel-and-dime you with this sort of content.

The CadMad shooting brake Eldorado Brougham-Nomad cross is up for auction

The CadMad custom 1959 Cadillac Eldorado Brougham is the coolest car crossing the block at the Scottsdale Barrett-Jackson auction. All arguments to the contrary are wrong and can be redirected straight to the gallery above. This 16-year project built by Super Rides and commissioned by the late Steve Barton won the Don Ridler Memorial Award at the 2019 Detroit Autorama, which goes to the custom build that shows the best creativity, engineering and quality workmanship. All of those qualities are on full display in this Eldorado Brougham-Nomad mashup. Just so we’re all on the same page, a 1959 Cadillac Eldorado Brougham was no normal Cadillac at the time. The sedanÂ’s exterior design is thanks to Pininfarina, as Cadillac had the Italian design company tweak its styling. It resulted in a much more subdued Cadillac than the rest of Caddy's giant fin-tastic designs of the decade. Only 200 were made over the course of a couple years, and they remain some of the rarest production Cadillacs to this day. The “Fawntana Rose” Cadillac standing before us is a shooting brake interpretation of that famous sedan. It has lost 18 inches in overall length, four inches in width and the rear doors have been completely eliminated. A Chevy Nomad roof was shortened by a couple inches and grafted onto the bodywork. The builders say that every last piece of sheet metal was modified for this build. Still, thereÂ’s still no mistaking it for a Cadillac. The chrome bumpers and lights were left mostly untouched, and the small fins were retained, as well. That Nomad roof was painted in Titanium Silver for contrast, the same silver thatÂ’s used on the new Ford GT. Things only improve when you open the hood. A 632-cubic-inch twin-turbo V8 built by Nelson Racing Engines (NRE) powers the shooting brake. Most of the time (on 91 octane fuel), it produces around 1,000 horsepower and 950 pound-feet of torque. Feed it 112 octane fuel and NRE claims itÂ’s capable of producing upwards of 2,500 horsepower. Yowza. A four-speed automatic transmission and strengthened Corvette transaxle somehow attempts to put the power down to the rear wheels. The seats are reflective of the amount of power this car puts down — 2012 Cadillac CTS-V buckets were used and modified with mauve-colored upholstery. All the trim was hand-painted, including the wood-grain flooring in back and is meant to “mimic the African Wenge and Tigerwood Maple.”  The time and effort that went into this built is truly astounding.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video:    

GM cancels CES date, possible Cadillac EV crossover unveiling

General Motors is bailing on CES 2020, the big annual consumer technology showcase in Las Vegas, after its plans to showcase an autonomous, electric vehicle were derailed by the 40-day UAW strike this fall. New evidence suggests that vehicle may have been Cadillac’s upcoming EV crossover. MotorTrend got GM to confirm that it was pulling out of CES, which takes place in January, though CEO Mary Barra in an interview said only that the vehicle they had planned to unveil was electric and featured autonomous technology — two key areas where the automaker plans to focus in the future. The automaker said the model simply wasnÂ’t ready. But MT said it then received an invitation from Cruise, GMÂ’s self-driving vehicle subsidiary, to an event later in January in San Francisco. That suggests the automaker could have been planning a different vehicle to show at CES than its self-driving Cruise AV “robotaxi,” which famously features no steering wheel or pedals. Cadillac showed off a digital rendering of a forthcoming unnamed electric crossover in Detroit in January, saying only that it would be available in both two- and all-wheel drive and sold globally. GM has said Cadillac will be its lead brand as GM delves into EV technology. The speculation is that the crossover will also feature CadillacÂ’s Super Cruise semi-autonomous highway driving technology. Whatever the vehicle was, or is, Barra said itÂ’ll be ready for viewing in the first half of 2020. GM has been developing the Chevrolet Bolt-based Cruise AV, a fully autonomous car, alongside its Cruise self-driving technology subsidiary, and building them at Orion Assembly plant near Detroit. It had once planned to debut a fleet of ride-hailing Cruise AV robot axis by the end of this year but realized the timeline was not realistic. Testing of the robot axis continues in San Francisco, Phoenix and Michigan. As for timing on a new timeline for fleets of Cruise AVs to take over the streets, Barra wouldnÂ’t show her hand. “We see a line of sight but weÂ’re not going to put another date out there,” she told MT, adding it was more important to “gain customer trust and usage.” As for Cadillac, any new reveal would likely come after the all-new Escalade SUV in February and amid a product blitz that will see it introduce a new or redesigned model roughly every six months through 2021.