2014 Cadillac Srx Luxury on 2040-cars

Auto blog

Junkyard Gem: 1967 Cadillac Fleetwood Sixty Special Sedan

If you lived in North America in 1967 and you wanted to show the neighbors you'd clawed your way to the peak of the success pyramid, only one car would do: Cadillac Fleetwood. Today's Junkyard Gem is 4,685 pounds of General Motors luxury hardware, finally knocked off the road at age 53 by an unfortunate wreck and now residing in a Denver self-service wrecking yard. The Cadillac brand endured some rough years during the 1970s and 1980s, but rode high during the 1960s. The Fleetwood Sixty Special Sedan started at $6,423 in 1967, or just over $50,000 when figured using inflation-adjusted 2020 dollars. A Mercedes-Benz 250SE sedan set you back $6,385 that year, but it weighed barely half as much and packed just 148 horses against the Cad's 340. Really, you had to get a genuine Rolls-Royce to out-swank the Fleetwood-driving Joneses back then (the Lincoln Continental and Imperial didn't have quite the snob appeal at that time), and the Roller cost more than several Fleetwoods combined. This car has been around during its long life. On the windshield, we see 1980 and 1981 parking stickers from the Keeneland Club in Kentucky. This car was already 13 years old by that time, but still very classy. At some point, the car must have migrated to California. Here's a U.C. Berkeley sticker. This ancient In-N-Out sticker comes from the Southern California-only era of the famous hamburger chain. Sometimes it's tough to determine the reasons that an old car ended up in a place like this, but that's not a problem here. Let's hope the car's occupants had their belts on (lap belts only in 1967, but still better than nothing), because these old Detroit land yachts didn't have much in the way of energy-absorbing crumple zones. The paint and interior are quite rough, so this car depreciated from being worth perhaps a couple of grand to scrap value in an instant.  Cruise control was a very rare option in 1967, and this car has it. The famous Fleetwood triple-tone horns were still there when I got to this car. Under the hood, 429 cubic inches (7.0 liters) of super-smooth Cadillac pushrod V8. This engine grew to 472 and then 500 cubic inches during the following few years. The paint shows some great patina. Did I buy the horns? Of course I bought the horns — I always bring my trusty lightweight junkyard toolbox when I head out to shoot some Junkyard Gems. Related Video:

2014 Cadillac XTS Vsport

Not long after bombing around the Milford Road Course in the new CTS Vsport, Cadillac invited me to try out its other new-for-2014 Vsport model: the XTS. And despite using the same twin-turbocharged 3.6-liter V6 from the CTS, the Vsport package takes on a whole new meaning here in Cadillac's softer flagship.
In the CTS, this trim perfectly bridges the gap between the standard models and the hardcore CTS-V, and is focused on being the best-driving version of the range without a standalone V badge. The XTS, however, has no proper V model, so the Vsport becomes the new range-topper for that line by default. But unlike the CTS Vsport, which uses rear-wheel-drive architecture and is focused on driving dynamics above all, the XTS is geared toward a much different customer.
The entire XTS experience is far more concerned with plush comfort than handling prowess, and while this Vsport model certainly ups the ante with more power and some mild suspension and steering tweaks, it's not exactly what we'd call a particularly engaging experience. But that doesn't mean it isn't good.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.