1996 Cadillac Fleetwood Brougham Sedan 4-door 5.7l on 2040-cars

Auto blog

GM under fire from safety advocates over braking problem caused by recall fix

Safety experts are lambasting General Motors over what they say is the automaker’s slow notification of owners of certain 2019 sedans and trucks that a recall fix could cause power braking to fail and increase the risk of a crash, the Detroit Free Press reports.  GMÂ’s original recall in December targeted about 550,000 Cadillac CT6 sedans and Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, all from the 2019 model year, over potentially defective electronic stability control and antilock brakes. In that case, GM said the errors would not show up as a diagnostic warning on the instrument cluster. But after GM had done recall work on 162,000 vehicles, about 1,700 owner have complained that their power brakes didnÂ’t work after they had the recall done and then used the OnStar app to start their vehicle. GM then issued a supplemental fix for customers whoÂ’d already had their vehicles serviced. In this case, a diagnostic warning should illuminate saying either “Service Brake Assist” or “Service ECS,” which GM says is a signal that a customer should not drive the vehicle and instead call their dealer, which will tow the vehicle and have it repaired. Safety advocates say the automaker hasnÂ’t gone far enough to protect customers. “The fact that you could potentially start a vehicle and not have brakes is a pretty risky proposition,” Sean Kane, president of the Safety Research and Strategies, which works on auto issues for plaintiffs and governmental organizations, told the Freep. “The fact that they wouldnÂ’t notify owners (sooner) is pretty stunning.” GM told the Freep it was required to notify the National Highway Traffic Safety Administration and file paperwork before it notified customers about the original recall, which was made Dec. 12. It then had to investigate and resolve the problem created by its original recall fix before alerting customers. GMÂ’s call center and dealers are contacting the remaining 900 customers who havenÂ’t yet had the update made to the original recall repair. GM also hired a vendor to send recall letters to the 550,000 customers affected by the original recall notifying them about the update. There are no known injuries or deaths related to the problem. Read the Freep story here.

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.