1995 Cadillac Deville Base Sedan 4-door 4.9l V8 Burgundy Red Leather Clean on 2040-cars

Auto blog

GM recalling 54k Cadillac SRX, HD pickup models

There are more recalls to report General Motors, but these latest actions pertain to newer examples of the Cadillac SRX, Chevrolet Silverado HD and GMC Sierra HD. With so much scrutiny on the company's recall strategy, GM is under increasing pressure to call in defective models more quickly, and it appears to be doing so here.
Here in the US, the automaker is recalling 50,571 Cadillac SRX crossovers from the 2013 model year fitted with the 3.6-liter V6 because the transmission control module programming can cause a three- or four-second lag in acceleration at low speeds. The explanation filed with the National Highway Traffic Safety Administration states, "if the following sequence occurs within two seconds: during an upshift from first to second gear (8-10 mph), the driver then brakes the vehicle to less than 5 mph, and then accelerates again," the delay can occur. According to Automotive News, the recall effects 56,400 vehicles worldwide, and the company is not aware of any crashes caused by the problem. The fix consists of a transmission control module (TCM) reflash.
In a separate recall, GM is repairing 51 Chevrolet Silverado HD and GMC Sierra HD pickups from the 2015 model year in the US. In vehicles with diesel engines and dual fuel tanks, the nuts that connect the fuel pipe to each side of the transfer pump between the tanks may be improperly torqued, which could cause a fuel leak. Obviously, this could be a fire hazard. The remedy is simply tightening the hardware. According to GM spokesperson Alan Adler, there have been no fires actually caused by the potential leak. "Only 21 of the trucks are in customer possession and they can be fixed anytime because there are no parts involved. The others are being fixed at dealerships," Adler said in an email to Autoblog.

2020 Cadillac CT5-V, CT4-V to be revealed next week

Even though the ATS-V and CTS-V are on the way out, the future is looking bright for Cadillac's high-performance sub-brand. Why is that? Well we're going to see not one, but two all-new V models on May 30. The company revealed its plans to show the 2020 Cadillac CT5-V and the CT4-V in an announcement about 15 years of the V brand. Not much is known about either car, but both should be wickedly quick based on their predecessors. We're particularly curious as to what engines will be used. With the CT5-V, a return of a supercharged pushrod V8 seems possible considering the CT5 is based on the Alpha platform that also underpins the Camaro. But Cadillac may want to push its more unique powertrains such as the twin-turbo, double-overhead-cam 4.2-liter V8 in the CT6-V. In the CT6-V, it makes 550 horsepower and 627 pound-feet of torque. Cadillac's former CEO said that other cars getting the engine will have it 500 horsepower and 553 pound-feet of torque. We think the company could get away with the full power in the CT5-V, though, since each car's mission and character is different. There's also a slim chance we could see a return of the manual transmission for the midsize sports sedan, based on what a Cadillac engineer said. As for the CT4-V, there are more questions, simply because we haven't even seen the regular version yet except in spy shots. Since the CT5 is built off the Alpha platform, it seems reasonable to think the CT4 will do the same, especially since the ATS also used the platform. And to leave space between the CT5-V and itself, using a hot version of the twin-turbo 3.0-liter V6 seems like the most likely choice. The hot V6 in the ATS-V made 464 horsepower and 445 pound-feet of torque, so we would expect the same. Hopefully Cadillac will offer a manual with it again. One final note from the Cadillac V announcement also got our attention. It said that these two cars are "just the beginning." That seems a pretty obvious sign there are other V models in the works. Since the CT4 and CT5 will round out the company's car line, the logical next choice would probably be crossovers. It will be interesting to see what an XT4-V or XT5-V will be like, especially since they use front-drive platforms. But in the meantime, we'll look forward to Cadillac's hot sedans.

[UPDATE] Cadillac Blackwing gets ticket to Italy, to go to work in a supercar

UPDATE: It seems MAT's belief it had secured a supply of Cadillac's 4.2-liter Blackwing V8 was premature, and based on a handshake deal before GM sold its Turin engine center to Italy's Punch Group. Shortly after Hagerty ran the story, GM sent a statement to the outlet reading, in part, "We do not have an agreement in place with Manifattura Automobili Torino (MAT) to provide or sell the Blackwing engine. ... Our team is following up with MAT president Paolo Garella to discuss the misunderstanding." MAT also submitted a statement to Hagerty, saying, in part, "We thank GM for the clarification. Although a signed agreement was not finalized between the parties, we were under the impression that our counterpart was committing to making this engine available to MAT at conditions yet to be defined. ... We hope that this misunderstanding will not compromise our relations with GM and possible future collaborations." The original article follows: Some necessary cost-cutting at Cadillac led to switching the new CT4, CT5, and Escalade to older platforms. The revised architecture plan meant Cadillac's newest top-tier products couldn't fit Cadillac's newest top-tier engine, the 4.2-liter twin-turbo DOHC V8 known as Blackwing. That engine would serve limited duty at full power in the now-dead CT6-V, and at reduced output in the CT6 Platinum V8 trim before ending its bright, brief domestic life. But the story isn't over, the rebirth of Blackwing coming from a most surprising locale: Turin, Italy. Before the canceled Geneva Motor Show, Hagerty spoke to Paolo Garella, CEO of Manifattura Automobili Torino; that's the company better known as MAT, makers of the New Stratos and contract engineering house for boutique screamers like the Aspark Owl electric hypercar, Apollo Intensa Emozione, and SCG003C. Garella told the outlet, "We have an agreement with General Motors" for a supply of Blackwings, which would be developed and built at the General Motors Propulsion Engineering Center (PEC) in Turin. Since 2005, the PEC has been used to develop GM's global diesel engines and electronics. MAT's plan is to put the V8 into a new limited-run car MAT is creating from its own design. Then another surprising turn: Belgium-based global auto supplier Punch Group bought the PEC, with plans to work with GM on projects in progress until at least the end of 2021. Nothing changes as far as MAT is concerned, except perhaps a chance for an even closer collaboration with Punch Turin.