2011 Cadillac Cts Luxury Sedan 4-door 3.0l on 2040-cars

Auto blog

Cadillac XT4 crossover reveals its lighting

The upcoming Cadillac XT4 compact crossover has once again been spotted, this time with less camouflage and an update to its lighting. Specifically, the little crossover is sporting production lighting front and rear, and it's sure to make the luxury SUV one of the boldest-looking Cadillacs. Part of the reason for this comes from the taillights. As we suspected from the last set of spy shots, the XT4 will have highly distinctive lights that run the full height of the C-pillar. Though it's a similar design to that of the Escalade, it's made more interesting by the significant forward rake of the rear pillar. Not only that, but that pillar is quite thick, too. The look is actually reminiscent of the old CTS wagon. Moving around the side, the reduced camouflage reveals that the doors and quarter panels are fairly conservative and lacking in many creases or bulges. We can make out the edges of what will likely be black plastic fender flares and rocker panel cladding. Finally reaching the front, we see that the headlights are similar to those of many current Cadillacs, including the recently refreshed XTS sedan. The main part of the lamp starts high up and is slightly horizontal like the Escala concept, but they extend over the fenders and a strip of LEDs descends down the front. A previous report noted the XT4 will be built in Kansas on the Chevy Malibu platform. That means it will be a front-drive-based vehicle likely offering both front- and all-wheel-drive. Under the hood will probably be at least one turbocharged four-cylinder engine, with a second, more powerful upgrade option a possibility. We expect to see the fully revealed model to show up by the end of 2018. Related Video: Featured Gallery Cadillac XT4 spy shots View 15 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt4 cadillac xt3

Cadillac considering more radical ATS-V

Cadillac is stepping up its performance game with the launch of the new ATS-V and CTS-V, but it's not about to rest on the laurels it removed from its own badge. While it's tipped to launch additional V models in the future, the latest word is Caddy could also come out with an even more extreme version of the ATS-V in the near future. According to Car and Driver, the prospect is on the table: "We might have something down the road that is a little bit more aggressive," chief engineer Dave Leone said, while another source pegged its potential arrival for 2017. It's too early to say what would constitute the more extreme model. The magazine points toward the Mercedes-AMG Black Series as an example. Jaguar took a similarly extreme approach with the XKR-S GT, as BMW has with the M3 GTS. As it is, the ATS-V is offered in both coupe and sedan variants with a 3.6-liter twin-turbo V6 producing 464 horsepower channeled to the rear wheels through a six-speed manual. Cadillac reportedly considered employing a dual-clutch transmission and all-wheel drive, but went the old-school route to avoid excess weight and (no doubt) cost.

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.