2006 Bentley on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

VW announces reworked 6.0 W12 TSI engine

Nobody makes more engines with a dozen cylinders than the Volkswagen Group. They're W12s, of course, owing to the novel shape of their cylinder banks. Now the German industrial giant has announced a comprehensively reworked version of that engine at the same Vienna Motor Symposium where it presented its new 2.0-liter turbo four. The new W12 retains the same arrangement and the same 6.0-liter displacement, but updates it all with the latest powertrain tech. In place of Audi's FSI direct injection and Bentley's TMPI multi-point injection, the engine has adopted a new TSI system. It's also got a pair of new twin-scroll turbochargers, APS-coated cylinders, a new cooling system, active engine mounts, cylinder deactivation, and a stop/start system. And – crucially for application in the upcoming Bentayga – it has an oil circuit designed for off-road use. The revised package now produces 600 horsepower and 664 pound-feet of torque. Considerably more than the 567 hp and 516 lb-ft offered in the Bentley Continental GT W12, but less than the GT Speed, which we suspect will get an even more powerful version of this new engine. It's also more powerful than even the top version of Audi and Bentley's 4.0-liter twin-turbo V8, to make the W12 a more compelling option. Of course that's just as far as the Continental GT is concerned. The W12 has also found use in the Continental GTC and Flying Spur, as well as the Volkswagen Phaeton and Audi A8, and could find further applications under the Flying B emblem and elsewhere in the future. VW says that in the right application (say, in the production version of the Bentley EXP 10 Speed 6 concept, for example), the new twelve-pot could deliver 0-62 times of under four seconds and a top speed in excess of 186 miles per hour. Volkswagen at the 36th International Vienna Motor Symposium Dr. Heinz-Jakob Neusser: "The car of the future will continue to fascinate people" - CO2 reduction, electromobility and digitalisation are the greatest challenges facing the automotive industry - The future of the internal combustion engine will be characterised by high rpm diesel and high-performance three-cylinder TSI engines - Laser roughening – innovative coating process in large-scale production - New 6.0 W12 TSI with 447 kW (608 PS) – performance and refinement - New generation of EU6 TDI engines for light-duty vehicles Dr.

Audi spearheads development of an ultra-luxurious EV code-named Landjet

The rumors claiming Audi wants to release a model positioned above the A8, and the reports of an ongoing electric car development program called Artemis internally, have seemingly converged. Citing sources inside the carmaker, a German media outlet reported the firm is busily creating a super-luxurious EV code-named Landjet. Audi is leading the development process, but sister companies Bentley and Porsche will reportedly receive their own version of the Landjet. All three models will likely take the form of three-row SUVs with generous dimensions. They'll be so big that none of Audi's production facilities will be able to manufacture them, according to an anonymous insider who spoke with German newspaper Handelsblatt. Luckily, Volkswagen makes vans, too. It's too early to tell what will power the Landjets. Audi assigned some of its most brilliant engineers to Project Artemis, and the technology they develop will permeate the three EVs before trickling down into cheaper models in the group. Expect high performance, a high driving range, and semi-automated driving technology. If the report is accurate, the Landjet vehicles will enter production in Hanover, Germany, by the end of 2024. The facility currently makes the Volkswagen Transporter, which is a direct descendant of the rear-engined Bus sold for decades, and it will start manufacturing the production version of the ID.Buzz concept in the coming years. Volkswagen hasn't commented on the report, and car companies rarely address speculation, but its Commercial Vehicles division released a statement in November 2020 that confirms the Hanover site will begin building SUVs about halfway through the 2020s. It's a major shift for a factory normally tasked with manufacturing vans. "Our main plant in Hanover is becoming the production site for three completely new premium electric vehicles in the Group. These D-SUVs are genuine flagship projects: premium, 100% electric, and highly automated," said Carsten Intra, the head of Volkswagen's Commercial Vehicles division, in a statement. He added the firm will invest about 680 million euros (about $807 million) to build a new assembly line, among other upgrades.